CoolAir RT880, SP950 - Waeco

InstallationCoolAir RT880, SP9506.2.2 Preparing the unit (RT880 only)ANOTICE!During preparatory work on the surfaces, secure the unit from fallingdown.Make sure that the work surface is clean and level to ensure that the unitis not damaged.➤ Place the air conditioning roof unit on a work surface with the housingfacing down.ANOTICE!Screw in the thread insert vertically.Do not exceed the screw torque of 10 Nm.➤ Screw in the 6 self-threading M8 thread inserts in the blind holesmarked with “2” (fig. 3 1, page 4).Use the supplied 1/4" bit for this.6.2.3 Attaching the seal for the cab roofANOTICE!Ensure that the adhesive surface for the seal between the unit and thecab roof is clean (free of dust, oil, etc.).➤ Stick the 2.5 m insulating tape (10 x 20 mm) to the cab roof, followingthe outline of the sunroof opening (fig. 4, page 4).➤ Provide the abutting edge and the top edge of the insulating tape withan unhardened plastic butyl sealing compound (e.g.SikaLastomer-710).40EN