Samsung D60 - User Manual_8.95 MB, pdf, ENGLISH

Setup 2 ( )
[ Selecting Video out type ]
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
[ Formatting a memory ]
This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
Connecting to an external monitor
When the camera is connected to an external
monitor in the recording mode or play back mode,
the image (movie or still image) will be visible on
the external monitor and the LCD monitor of the
camera turns off.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
Back
NTSC
PAL
OK Set
Sub menus
[No] : The memory will not be formatted. Press
the menu button three times and the menu
display will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
Back
No
Yes
OK Set
Yellow - Video
White - sound
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
36