BlackandDecker Pistola A Spruzzo- Bdps600 - Type 1 - Instruction Manual (Europeo)

(Original instructions)
ENGLISH
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u Injuries caused by touching any moving parts.
u Injuries caused by touching any hot parts.
u Injuries caused when changing any parts or accessories.
u Injuries caused by prolonged use of the appliance. When
using any appliance for prolonged periods ensure you
take regular breaks.
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured
in accordance with a standard test method provided by
EN 60745 and may be used for comparing one tool with
another. The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
Labels on the appliance
The following pictograms are shown on the tool:
:
R
Warning! To reduce the risk of injury, the user
must read the instruction manual.
Warning! Do not expose the appliance to rain or
high humidity.
Warning! Keep bystanders away.
6
&
Electrical safety
@
Warning! Wear a respirator or mask.
Warning! Use only non-flammable liquids.
Warning! This product must be earthed.
Always check that the power supply corresponds
to the voltage on the rating plate.
Power plugs must match the outlet. Never modify the plug in
any way. Unmodified plugs and matching outlets will reduce
risk of electric shock.
u If the supply cord is damaged, it must be replaced by
the manufacturer or an authorised Black & Decker
Service Centre in order to avoid a hazard.
Extension cables & Class 1 product
u A 3-core cable must be used as your appliance is
earthed and of Class 1 construction.
u Up to 30m (100 ft) can be used without loss of power.
u Electric safety can be further improved by using a highsensitivity
30 mA residual current device (RCD).
Features
This appliance includes some or all of the following features.
1. Quick clean lever
2. Spray trigger
3. Sprayer
4. Power unit
5. Quick clean door
6. Side fill canister
7. Lid
8. Flow control knob
9. Speed control switch
10. Green fan spray nozzle (BDPS400 & BDPS600 only)
11. Blue cone nozzle
12. Mixing bucket (BDPS600 only)
13. Viscosity cup
14. Cleaning bush
15. Sprayer release button
16. Quick clean fill cup (BDSP600 only)
17. Paint can clip (BDSP600 only)
18. Direct to tin hose (BDSP600 only)
O
Warning! Wear safety glasses or goggles when
operating this tool.
9