Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR

3 Prior to first use
3 Prior to first use
3.1 Unpacking
CAUTION:
Keep the packaging for storing the appliance,
or for safe transport. Always transport
or ship the appliance in its original packaging
to avoid damage.
1. Unpack the appliance and its accessories.
2. Check the contents for completeness and
possible damage (Fig. 1).
NOTE:
Contact your dealer if you have found damage
resulting from transport.
3.2 Positioning the docking station
5
6
1 m 1 m
1. If possible, choose a location where there
is no carpet. The rubber feet will adhere
better to a level surface.
2. Locate the docking station in close proximity
to a mains socket.
3. Locate the docking station against a wall
or a piece of furniture so it will not be
moved by the robot.
4. Make sure that there is a space of at least
1 m x 1 m in front of and next to the docking
station (Fig. 5).
5. Now remove the 4 protective films from
the rubber feet underneath the docking
station (Fig. 6) and position it in a stable
manner.
CAUTION:
Rubber may cause unwanted stains or discolouring
on certain surfaces such as wood.
Check the manufacturer's recommendations
to avoid damage.
6. Have the AC adapter cable placed behind
the station (Fig. 7) so that it does not obstruct
the robot's ability to dock.
NOTE:
Also remember not to locate the light fence
tower near the docking station. Otherwise
your robot may be impeded from docking to
the station.
7
42