Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR
Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR
Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 Use<br />
• Alternatively, you can choose the "auto"<br />
mode with the " A " key of the remote<br />
control.<br />
- Your robot will then effect 2 complete<br />
cleaning cycles (including one charging<br />
cycle).<br />
A<br />
Go<br />
GB<br />
16<br />
• Alternatively, you can guide the robot directly<br />
via the direction keys " ", " ",<br />
" ", " " of the remote control.<br />
A<br />
24<br />
HOUR<br />
Go<br />
- Your robot will then move into the chosen<br />
direction.<br />
- Your robot can only effect one direction<br />
at once.<br />
NOTE:<br />
When the capacity of the battery pack<br />
diminishes, your robot searches for the signal<br />
of the docking station, docks on and<br />
charges for approx. 4 to 5 hours. Then the<br />
LEDs turn off and the robot can be used.<br />
If it - for any reason - does not succeed in<br />
docking onto the docking station, you have<br />
to lift it manually onto the docking station,<br />
see Chapter 3.4, "Charging the battery<br />
pack for the first time"<br />
NOTE:<br />
17<br />
Cliff sensors detect stairs and other cliffs to<br />
avoid falling. A height difference of 7 cm or<br />
more would be judged as a cliff. When a cliff<br />
is detected, your robot will move backwards<br />
to avoid falling. Your robot will stop immediately<br />
if all 3 cliff sensors detect a cliff simultaneously.<br />
47