Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR
Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR
Dirt Devil Navigator - Bedienungsanleitung Dirt Devil M608 Saugroboter NAVIGATOR
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 Prior to first use<br />
5. Now charge your robot for approx. 4 to 5<br />
hours, until<br />
- a short tune is played and<br />
- both LEDs turn off (Fig. 11).<br />
11<br />
NOTE:<br />
When its battery capacity becomes low,<br />
your robot automatically returns to the<br />
docking station for charging. If it - for any<br />
reason - does not succeed in docking onto<br />
the docking station, you need to lift it manually<br />
onto the docking station, as described<br />
above.<br />
3.5 Activating the remote control<br />
1. Remove the plastic film (Fig. 12) from the<br />
remote control's battery compartment.<br />
12<br />
3.6 Inserting batteries into the light fence tower<br />
13<br />
1. Open the battery compartment cover.<br />
2. Insert the 2 supplied batteries (type C,<br />
1.5 V) as indicated (Fig. 13). Make sure<br />
you position them correctly (Fig. 13).<br />
NOTE:<br />
When changing batteries, be sure not to<br />
mix batteries of different types or those that<br />
are fully charged with those that are partly<br />
charged.<br />
44