TeeJet LH500 IntelliTram Fit Instructions (in English)

More documents

Recommendations

Info

10 LH AGRO CONNECTING SENSORS AND CLUTCHES: PCB Description/ Sensor/Clutch type Jp-3 Jp-4 Jp-5 JP-6 Terminal no. 1 2 3 4 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 Description Left clutch Right clutch Signal O-2 + O-8 + 1 LH Clutch Brown Brown Blue Blue Brown Brown Blue Blue O-1 - O-7 - O-4 + O-6 + O-3 - O-5 - RPM Left clutch Fan RPM Right clutch 2 JAC Clutch(2000) Brown Brown White White Brown Brown White White Blue Black Blue Black Wheel Left & right. Implement sensor RPM Drill shaft Empty hopper +12V In-2 0V +12V In-3 0V +12V In-4 0V In-5 ┌ ┐ 0V +12V In-1 0V +12V In-7 0V 3 LH 2-core sensor Brown Blue Brown Blue Brown Blue 4 LH 3-core sensor Blue Black Brown Blue Black Brown 5 LH Induct. sensor Brown Black Blue Brown Black Blue Brown Black Blue 6 7 8 9 LH Hopper sensor LH no. 904-152 LH Hopper sensor LH no. 904-151 LH 12-pulse sensor (clutch) LH 12 pulse sensor (drill shaft) Brown Blue Brown Blue Selecting the sensor and clutches: Nr.: Description Typical use: Comments: 1 LH Clutch Tramlines, normal drill External 12 pulse sensor (See pos. 7). For 17 mm hexagonal axle. 2 JAC Clutch Tramlines, normal drill Internal 12 pulse sensor. 20 mm round axle and 17 mm or 20 mm hexagonal axle 3 LH 2-core sensor Wheel, implement sensor (area on/off) Activated by a magnet. Good for varying activation distances 3 – 15 mm 4 LH 3-core sensor Shaft speed – fan Activated by a magnet. Good for high shaft speeds. Activation distance = 3 – 5 mm 5 LH inductive sensor Shaft speed – fan Activated with metal. Good for high shaft speeds. Activation distance = 1 – 3 mm 6 LH Hopper sensor Empty hopper Activated by seed, etc. 7 LH Hopper sensor Empty hopper Activated by seed, etc. 8 LH 12-pulse sensor (clutch) RPM – clutch Complete unit with in-built magnets. 12 pulses per revolution. 9 LH 12-pulse sensor (drill shaft) RPM – drill shaft Complete unit with in-built magnets. 12 pulses per revolution. Brown Blue Black Red Blue Brown White Blue Clutches: Clutches (Solenoid type): J1 to J4 move to position ”Sol.” Clutches (Motor type): J1 to J4 move to position ”Motor” The total power consumption per side must not exceed 4 Amp. RPM sensors for the drill shaft and clutches: ! On many seed drills the drill shaft can rotate very slowly (1 rev. per 100 metres). We recommend therefore, fitting a RPM sensor that transmits 12 pulses per revolution on the drill shaft and clutches. Implement sensors: The above table shows how to connect two sensors, i.e. fitted to the seed drill’s markers. The implement sensors are connected in series so that they both must be activated to give the computer a signal. If only one implement sensor is to be fitted then this must be connected to Jp-5 terminal 10 (brown) and 13 (blue). UK
LH AGRO 11 LH Intellitram 500 system.vcd DEUTSCH Einleitung: LH IntelliTram ® 500 Fahrgassenmonitor ist für Anwendung auf verschiedenen Drillmaschinen entwickelt. Es ist weiterhin möglich viele verschiedenen Sensorund Aktuatortypen anzuschließen. Diese Montageanleitung umfaßt deshalb vor allem eine Übersicht über Anschluß der einzelnen Sensoren und Aktuatoren an das LH5000 System, aber nicht wie sie auf die Sämaschine montiert werden. Systembeschreibung: 1. Monitor 2. DIN/ISO Stecker (DIN 9684-1, ISO 11786) 3. Stromversorgungsstecker (DIN 9680, ISO/TR 12369) 4. Maschinenstecker 5. Kupplung links 6. Rotationswache der linken Kupplung oder Gebläseumdrehungen (Luftass. Maschinen) 7. Gerätesensor links 8. Umdrehungsüberwachung für Säwälle 9. Tanksensor 10. Kupplung rechts 11. Umdrehungsüberwachung der rechten Kupplung 12. Gerätesensor rechts 13. Radsensor Der Standardsatz besteht aus: 1 Stück Monitor 1 Stück Sammelbox 1 Stück Radsensorsatz 2 Stück Gerätesensorsatz Übrige Sensoren, Kupplungssatz u.a.m. müssen separat bestellt werden. D
Page 1 and 2: MONTERINGSVEJLEDNING FITTING INSTRU
Page 3 and 4: LH AGRO 3 LH Intellitram 500 system
Page 5 and 6: LH AGRO 5 2 D1 1 JP-1 JP-3 JP-5 Mot
Page 7 and 8: LH AGRO 7 LH Intellitram 500 system
Page 9: LH AGRO 9 2 D1 1 JP-1 JP-3 JP-5 Mot
Page 13 and 14: LH AGRO 13 2 D1 1 JP-1 JP-3 JP-5 Mo
Page 15 and 16: LH AGRO 15 LH Intellitram 500 syste
Page 19 and 20: LH AGRO 19 LH Intellitram 500 syste
Page 23 and 24: LH INTELLITRAM ® 500 RESERVEDELE,

TeeJet LH500 IntelliTram Fit Instructions (in English)

Create successful ePaper yourself

Delete template?

Save as template?