Drehgeber für Funktionale Sicherheit - Fritz Kübler GmbH Zähl- und ...

Encoder with solid shaft and flat, flange type 1 (see data sheet 58x3SIL)
The fixing of the solid shaft encoder is carried out using the threaded holes provided in the flange
and at least three M3 screws, property class 8.8; these are to be tightened with a recommended
torque of 1Nm (assumed coefficient of friction 0.14) and secured against loosening. The connection
of the shaft to the drive must be effected using a tolerance compensating element and secured
against loosening. When connecting the solid shaft, the operator, operating company or installation
company, which is installing the encoder, must ensure that the fixing method complies with the safety
requirements in force.
1
2
Encoder with solid shaft and feather key, flange type 1 (see data sheet 58x3SIL)
The fixing of the solid shaft encoder with feather key is carried out using the threaded holes provided
in the flange and at least three M3 screws, property class 8.8; these are to be tightened with a recommended
torque of 1Nm (assumed coefficient of friction 0.14) and secured against loosening. The
connection of the shaft to the drive must be effected using a tolerance compensating element and
secured against loosening. When connecting the solid shaft with feather key, the operator, operating
company or installation company, which is installing the encoder, must ensure that the fixing method
complies with the safety requirements in force.
10
58
53
36
10 f7
20
3
10
3
a
13,25
5853SIL 5863SIL
3xM3, 6 tief deep
Dimension Maß 5853SIL 5863SIL
Maß Singleturn Multiturn
Singleturn Multiturn
3xM4, 8 tief deep
aa 38 49,5 49,5
58
53 -0,1
36 f8
H7
10
1 3xM3, 6 tief deep
2 3xM4, 8 tief deep
3 feather Passfeder key DIN 6885 - – A - – 3x3x6
Optional: Passfeder Optional: feather DIN 6885 key DIN - A - 6885 4x4x8–
A – 4x4x8
20
3
10
6
3
a
13,25
58,5
58,5
Dimension Maß
120°
3x120°
5853SIL
Singleturn
20°
20°
5863SIL
Multiturn
a 38 49,5
1
1
2
48 ±0,1
2