S 004 - Ebike
S 004 - Ebike
S 004 - Ebike
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Malfunctions/Causes/Repair<br />
1. Controller<br />
3. Motor<br />
3.1 No performance from the motor but the<br />
controller and the battery still function.<br />
1.1 The display does not light up after being<br />
switched on.<br />
Cause:<br />
Battery incorrectly<br />
positioned<br />
Battery defect<br />
Cable/contact error<br />
Electronics defect<br />
Repair:<br />
>insert the battery again<br />
>contact dealer<br />
>contact dealer<br />
>contact dealer<br />
1.2 The display unit switches off during the ride.<br />
Cause:<br />
The motor cable<br />
under the cover<br />
is disconnected<br />
other cable/contact<br />
error<br />
Pedal sensor<br />
defective<br />
Electronic defective<br />
4. Charging unit<br />
Repair:<br />
>control plug<br />
>contact dealer<br />
>contact dealer<br />
>contact dealer<br />
Cause:<br />
Battery empty<br />
battery again<br />
Electronics defect<br />
Plug connection<br />
has loosened<br />
2. Battery<br />
Repair:<br />
>completely recharge<br />
>contact dealer<br />
>contact dealer<br />
See „Charging and Care of the Battery“<br />
2.1 No LED lights up after battery status display<br />
has been pressed.<br />
Cause:<br />
Battery empty<br />
Cells in battery<br />
pack defective<br />
Repair:<br />
>completely recharge<br />
battery again<br />
>contact dealer<br />
2.2 The operating distance of the battery has<br />
been drastically reduced.<br />
Cause:<br />
Repair:<br />
The battery is<br />
exhausted (aged) >exchange battery<br />
The charger<br />
is defective<br />
>contact dealer<br />
Charging plug/charging<br />
cable damaged >contact dealer<br />
70
Change language