Manual XXL Speed Saw - Mini Circular Saw
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
EN<br />
All work can only be carried out in dry conditions.<br />
The electric power tool may only be used in<br />
accordance with its specification. It is not intended<br />
for any other use above and beyond these. The user<br />
or operator, and not the manufacturer, is responsible<br />
for any resultant damage or injuries of any kind.<br />
Please note that our electric power tools are not<br />
designed for commercial, trade or industrial use. We<br />
provide no warranty if the electric power tool is used<br />
for commercial, trade or industrial applications or<br />
activities equivalent to these.<br />
3. COMPONENT description and scope<br />
of supply<br />
1. Motor vents<br />
2. Handle Grip<br />
3. ON/OFF switch<br />
4. Red light indicates overload or blocking of the<br />
saw blades<br />
5. Cutting depth knob<br />
6. Blade guard release<br />
7. <strong>Saw</strong> blade<br />
8. Edge guide locking knobs<br />
9. Cut line indicator<br />
10. Edge guide<br />
11. Blade guard<br />
12. Spindle lock button<br />
13. Power ON light<br />
14. Dust port<br />
15. Vacuum hose adapter<br />
16. Adapter ring<br />
Lieferumfang<br />
1x 24 TCT blade<br />
1x diamond cutting blade Ø 85 mm<br />
1x G50 diamond cutting blade for ceramics<br />
2x Ø 85 mm super cut blade<br />
1x flat protection guard (on machine)<br />
1x parallel guard<br />
1x V protection guard<br />
1x dust extraction adapter<br />
In strong carrying case<br />
4. Intended use<br />
The mini hand-held circular saw is suitable for<br />
sawing straight-line cuts in wood, wood-like materials<br />
and plastics. For these cuts, use either the carbide<br />
tipped saw blade or the HSS saw blade. Cutting tiles,<br />
printed circuit boards and glass fibre reinforced<br />
plastics is possible using the diamond cutting discs.<br />
5. Technical data<br />
Rated voltage 230 V~<br />
Frequency<br />
50 Hz<br />
Rated power<br />
450 W<br />
No load speed n 0<br />
4200 min -1<br />
Cutting depth<br />
0 - 27 mm<br />
<strong>Saw</strong> blade<br />
Ø 85 + Ø 50 mm<br />
Parallel guard<br />
170 mm<br />
Noise level (tested according to<br />
EN 60745-1:2009+A11, EN 60745-2-5:2010)<br />
L pA<br />
= 87.7 dB(A), K pA<br />
= 3 dB(A)<br />
L WA<br />
= 98.7 dB(A), K WA<br />
= 3 dB(A)<br />
Noise level (tested according to<br />
EN 60745-1:2009+A11, EN 60745-2-22:2011)<br />
L pA<br />
= 91.83 dB(A), K pA<br />
= 3 dB(A)<br />
L WA<br />
= 102.83 dB(A), K WA<br />
= 3 dB(A)<br />
Vibration level (tested according to<br />
EN 60745-1:2009+A11, EN 60745-2-5:2010)<br />
Cutting of wood ah,w = 2.62 m/s 2 , K = 1.5 m/s 2<br />
Vibration level (tested according to<br />
EN 60745-1:2009+A11, EN 60745-2-22:2011)<br />
ah = 3.35 m/s 2 , K = 1.5 m/s 2<br />
Attention!<br />
The stated vibration emission was determined using<br />
a standardised measurement technique and allows<br />
comparisons between this tool and others. The stated<br />
vibration emission can also act as a preliminary risk<br />
estimate. The actual vibration emission during tool<br />
use may deviate from the indicated values,<br />
depending on how the tool is used. Based on the<br />
estimated risk under realistic conditions, suitable<br />
preventative measures should be taken to protect the<br />
user (The load run times for all the working cycles<br />
25