TS5002E - E2 Fachhandels & Reparatur Servicecenter | Start

Weitere Magazine

Empfehlungen

Info

ENGLISH size: A5 14 CONTROL ELEMENTS 18 1 2 3 4 1.2L 1.0L 0.8L 0.6L MIN 17 16 15 14 5 6 7 8 13 12 1 Lid release button (tea pot) 10 Water level indicator (kettle) 2 Lid (tea pot) 11 On/off switch (kettle) 3 Tea filter 12 Power cord with plug 4 Power cord socket 13 Operating light 5 Spout 14 On/off switch with operating light (heating plate) 6 Filter 15 Heating plate 7 Lid (kettle) 16 Water level indicator (teapot) 8 Lid release button (kettle) 17 Base station 9 Handle (kettle) 18 Handle (tea pot) <strong>TS5002E</strong>-IM-DE-EN-V1.indb 14 15/07/2010 10:10 AM 9 10 11
size: A5 OPERATING INSTRUCTIONS Intended Use • The device is only intended for heating water and keeping tea or other hot drinks warm. Any other use can cause damage to the device or injuries. Unpacking and checking • Carefully take the device and its accessories out of the packaging. Retain the packaging in case you would like to store the device away or transport it at a later date. If you choose to dispose of the packaging, then please do so according to the applicable legal regulations. • Check the packaging contents for completeness and damages. Should the contents in the packaging not be complete or be damaged, do not use the device. Return it to your retail outlet immediately. Operating the kettle • Place the base station (17) on a level, heat-resistant and non-slip surface. Insert the power cord (12) into the power cord socket (4) on the base station. • Clean the kettle, the tea pot and the tea filter (3) before first use, in order to remove any residue from production. • Always take the kettle off the base station before you fill it with water. Press the lid release button (8) to open the lid (7) of the kettle. Fill the kettle with water up to the MAX 1.7L mark. • Push the lid down until it audibly locks into place. • Place the kettle on the base station and insert the power cord into a suitable power socket. • Make sure that no water can get into the base station. • Set the on/off switch (11) to the I position. The red operating light (13) comes on. Let the water boil once. • As soon as the water has boiled the kettle switches itself off automatically. The on/off switch flicks back into the O position. The operating light goes out. • Then pour the water away. Repeat the process, letting the device cool down in the meantime. • Clean the tea pot and the tea filter with some washing-up liquid and warm water and dry the parts thoroughly. • After cleaning the water can be boiled for tea or other hot drinks, as described above. • The kettle is equipped with a filter (6), which separates limescale and other residue when the water is being poured. Clean it regularly as described in the chapter CLEANING AND CARE. Notes: • The water level must always be between the upper (MAX 1.7L) and lower (MIN 0.5L) markings. Do not fill the kettle with water above the maximum level. Boiling water may spit out of the kettle and cause scalding. If there is not enough water the device switches itself off before the water boils. • Warning! Never open the lid (7) while the water is boiling. Also, do not remove the kettle from the base station (17) while water is boiling. <strong>TS5002E</strong>-IM-DE-EN-V1.indb 15 15/07/2010 10:10 AM 15 ENGLISH
Seite 1 und 2: size: A5 Teestation Edelstahl Stain
Seite 3 und 4: size: A5 WICHTIGE SICHERHEITSANWEIS
Seite 5 und 6: 18 1 2 3 4 1.2L 1.0L 0.8L 0.6L MIN
Seite 7 und 8: size: A5 BEDIENUNGSANWEISUNGEN •
Seite 9 und 10: Kunden Info Herstellergarantie Wir
Seite 11 und 12: Technical data Proper disposal of t
Seite 13: size: A5 IMPORTANT SAFETY INSTRUCTI
Seite 17 und 18: size: A5 CLEANING AND CARE Cleaning
Seite 19: Customer Info Manufacturer’s Warr

TS5002E - E2 Fachhandels & Reparatur Servicecenter | Start

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?