Branchenführer Innovative Biowerkstoffe (BIB ... - nova-Institut GmbH
Branchenführer Innovative Biowerkstoffe (BIB ... - nova-Institut GmbH
Branchenführer Innovative Biowerkstoffe (BIB ... - nova-Institut GmbH
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
MAS<br />
Get more out of your Polymer<br />
The Austrian company MAS designs and manufactures<br />
in<strong>nova</strong>tive solutions for recycling and reprocessing<br />
of plastics. The in<strong>nova</strong>tive strength of the company<br />
is shown by approximately 60 patents, in which<br />
majority owner Ing. Helmuth Schulz is called the<br />
inventor.<br />
On a production area of approximately<br />
1.200 m 2 MAS constructs the entire equipment<br />
for processing of post-consumer plastics, like PET<br />
or fibre-reinforced polymers, exactly suitable to<br />
customer requirements and local conditions. The<br />
plants are delivered turn-key to customers in the<br />
whole world. With the NCT-Extruder MAS can<br />
offer a system with high efficiency and high<br />
performance for direct-extrusion and compounding<br />
of natural fibre plastics.<br />
The products<br />
The NCT-Extruder with the conical co-rotating twin screws is the economical<br />
solution in the extrusion of natural-fibre reinforced plastic.<br />
The conical co-rotating principle makes an excellent homogeneity of<br />
the plastic fibre melting. This raises the mechanical properties of the<br />
product considerably.<br />
The conical extruder design gives an enormous operation volume<br />
in the feeding area, whereby the highest screw filling degrees get<br />
reached. The low melting temperature, which achieved in this process,<br />
allows the highest output. The plasticizing unit handles pressure built<br />
up to 300 bar, with venting even with high degree of moisture of the<br />
input material.<br />
NCT-Extruder<br />
• Profile downstream equipment<br />
• Material pre-processing (drying, mixing)<br />
• Pelletizing equipment (underwater pelletizing, air pelletizing)<br />
• Pellet scales<br />
• Silos<br />
• Throughput<br />
Services<br />
In cooperation with an Austrian R&D partner MAS offers services in<br />
the recipe development, in engineering of plant concepts as well as<br />
the start-up of the whole MAS-production line.<br />
Kontakt/Contact<br />
M-A-S Maschinen- und<br />
Anlagenbau Schulz <strong>GmbH</strong><br />
Hobelweg 1<br />
4055 Pucking<br />
Österreich/Austria<br />
phone: +43 (0) 7229/7 89 99-11<br />
Fax: +43 (0) 7229/7 89 99-10<br />
www.mas-austria.com<br />
Ansprechpartner/Contact person<br />
Stefan Lehner<br />
lehner@mas-austria.com<br />
67