Communication and Interface Protokolltransparenter Fractional-N Synthesizer senkt Jitter auf Effektivwert von
Communication and Interface USB 2.0 Lösungen von Cypress – So wird USB Universal ® Die EZ-USB FX2 Serie ist <strong>die</strong> erste Generation einer High-speed USB Familie von Cypress mit Datentransferraten von bis zu 480 Mbps. Mit 40x höheren Geschwindigkeiten <strong>als</strong> USB 1.1 bieten EZ-USB FX2 Produkte derzeit <strong>die</strong> größte Leistung. Alle Produkte sind USBkonform und unterstützen High- und Full-Speed-Lösungen. High-Bandwidth USB 2.0 stärkt <strong>die</strong> Position von USB <strong>als</strong> <strong>die</strong> I/O-Bus Technologie schlechthin für alle Computer-Plattformen. USB 2.0 erhöht <strong>die</strong> Geschwindigkeit in Peripherie-PC-Verbindungen von 12 Mbps auf 480 Mbps. Durch <strong>die</strong> Auf- und Abwärtskompatibilität ist <strong>die</strong> Einbindung bestehender USB-Systeme und Peripheriegeräte problemlos möglich. Alle bestehenden Geräte, Kabel und Steckverbinder sind mit dem neuen Standard kompatibel. Mit USB 2.0. können hochauflösende Kameras, externe Massenspeicher, Scanner, Drucker und Broadband-Verbindungen Daten innerhalb weniger Augenblicke übermitteln. Der EZ-USB FX2 ist ein Single-Chip Baustein, der <strong>die</strong> Vorteile von herunterladbarer Firmware mit der Geschwindigkeit von 480 Mbps in einem Gehäuse mit wenigen Pins vereint. Um dauerhaft Übertragungsraten von 480 Mbps realisieren zu können, verwendet er eine neue Architektur, <strong>die</strong> den Datenaustausch zwischen einem USB-Abschluß-FIFO und einem externen FIFO unnötig macht. Hier werden <strong>die</strong>se beiden Funktionen in nur einem FIFO integriert, so daß der Datentransfer auch ohne Microcontroller durchgeführt werden kann. Ferner verfügt <strong>die</strong> EZ-USBFX2 Familie über ein General Programmable Interface (GPIF) und ermöglicht somit eine nahtlose Verbindung mit fast jedem Peripherie-System, wie z.B. ATAPI, EPP, PCMCIA, UTO- PIA und jedem DSP oder Prozessor. Neben EZ-USB FX2 gibt es auch eine kostengünstigere Variante, <strong>die</strong> EZ-USB SX2- Familie. Diese ist mit einem USB 2.0 Transceiver, einem "intelligenten" Serial Interface Engine (SIE), einem 4 Kbyte FIFO, einer Highspeed PLL, vier vollkommen frei konfigurierbaren Endpunkten und einem sehr einfachen Local Bus Interface ausgestattet. Sie kann entweder mit Highspeed (480 Mbps) oder Full-speed (12 Mbps) arbeiten. USB 2.0 Solutions from Cypress – Making USB Universal ® The EZ-USB FX2 series is Cypress Semiconductor's first-generation high-speed USB family, providing data transfers of up to 480Mbps. With a 40x jump over USB 1.1 speeds, EZ-USB FX2 products offer the highest performance available on the market. All products are USB-compliant in support of both high- and full-speed solutions. The high-bandwidth USB 2.0 specification solidifies USB as the I/O bus technology of choice for all computer platforms. USB 2.0 extends the speed of peripheral-to-PC connection from 12 Mbps to 480 Mbps. Migrating existing USB peripher<strong>als</strong> to USB 2.0 is easy, given the forward- and backwardcompatibility with existing USB systems and peripher<strong>als</strong>. All existing devices, cables, and connectors are compatible with the new standard, creating a seamless upgrade path. With USB 2.0, high-resolution cameras, external massstorage devices, scanners, printers, and broadband connections all move data in a snap. EZ-USB FX2, Cypress's first general-purpose integrated USB microcontroller for USB 2.0, is a single-chip solution that combines the benefits of the downloadable firmware and the speed of 480 Mbps in low-pincount packages. To achieve 480 Mbps sustained data transfer rates, EZ-USB FX2 uses a novel architecture that eliminates the need to transfer data between a USB endpoint FIFO and an external interface FIFO. This patented approach merges both of these functions into the same FIFO, eliminating the need for microcontroller intervention of data transfers. The EZ-USB FX2 family <strong>als</strong>o features a General Programmable Interface (GPIF), facilitating a glueless interface to practically any peripheral system, including ATAPI, EPP, PCMCIA, UTOPIA, and any DSP or processor. In addition to the EZ-USB FX2 series, there is a costeffective option, EZ-USB SX2, available. This EZ- USB SX2 integrates a USB 2.0 transceiver, an "Intelligent" Serial Interface Engine (SIE), a 4 Kbyte FIFO, a high-speed PLL, four highly configurable endpoints, and a very simple local bus interface. The device can operate at either Hi-speed (480 Mbps) or Full-speed (12 Mbps). Home Previous Next