manual_installation_final
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
2.3 – Connections of the Short Circuit Terminal
Phase 2: Preparation of the Installation
*Read the Short Circuit Borne Management
Considerations before accomplishing this step*
For Black Cables [12] numbered #4 to #9,
follow the instructions below:
Make sure the Short Circuit Terminal [4] is
closed before making the connection.
Join the two terminalless ends of the Black
Cables #4 [12] in an Insulated Terminal
[18b] and connect them to one of the
inputs of the Short Circuit Terminal [4]
3x [4]
1x [11]
3x [17]
6x [18B]
I3
1.3.1
-
4 B A -
4
Join the two terminalless ends of the Black
Cables #5 [12] with a Black Cable #0
[12] on an Insulated Terminal [18b] and
connect them to the other inputs of the
Short Circuit Terminal [4].
Connect the other end of the Black Cable
#0 [12] to a Fork Terminal [17] and connect
it to ground.
Repeat the process for Black Cables #6 to
#9 [12].
5
0
5
Installation Manual 14