manual_installation_final

Phase 3: Installation
3.5 – Outlet Connection
Connect one of the outputs of the Double
Wire of the Outlet mounted in step (2.1) to
one of the phases and the other toGND Line.
Use a Fork Terminal [17] for connections.​
3.6 – Turn off the power!
2.6
Certify that all the steps were successfully
and attentiously executed.​
Turn on the power.
With double-sided tape [14], glue the
socket to a location close to the Neu Plus.
2x [17]
2.5
OFF
ON
OFF
ON
GROUND
3.7 – Power Source – NEU Plus
2.7
Connect the Power Source [2] of Neu Plus
to the Outlet.
V I1 I2 I3
1 2 3 N + - + - + - B A - +
R
Installation Manual 24