Comfort 830 - Marantec
Comfort 830 - Marantec
Comfort 830 - Marantec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. Mounting<br />
6.4 Mounting the toothed rack<br />
to the door<br />
6.4 / 1<br />
i<br />
Attention!<br />
To get a correct function of the system,<br />
observe the following points:<br />
- The console must be firmly screwed<br />
to the floor.<br />
- The operator must be firmly screwed<br />
to the console.<br />
- The operator must be unlocked.<br />
- It must be possible to move the door<br />
by hand.<br />
Reference:<br />
To unlock the operator please look up<br />
chapter 6.6.<br />
• Move the door to the CLOSED position.<br />
• Put the toothed rack onto the spur gear so that it<br />
will engage.<br />
The mounting height of the toothed rack depends on<br />
the mounting version.<br />
Standard mounting<br />
Attention!<br />
In order to guarantee a faultless door<br />
travel, the measurement X (+/- 5mm)<br />
must be kept during installation.<br />
Installation and operating instructions <strong>Comfort</strong> <strong>830</strong> GB (#70676)17<br />
6.4 / 2<br />
A<br />
X<br />
C Upper level finished floor (OFF)<br />
Measurement X:<br />
Special 431: 165 mm<br />
Special 432: 165 mm<br />
Special 441: 175 mm<br />
Special 471: 165 mm<br />
With differences of more than 5 mm:<br />
• Mount a suitable device to the door.<br />
C<br />
A<br />
For fine adjustment (+/- 5 mm) the height of the<br />
operator can be changed with the screws (A).