ConceptpowerTM – Slim 10-40kVA - Atek Teknik A/S

Conceptpower TM – Slim 10-40kVA 

TECHNICAL 

SPECIFICATIONS 

Conceptpower TM Slim-Line 

10-15-20-30-40kVA 

Uninterruptible Power Supply (UPS) 

n+1 redundant, three-phase 

On-Line, Double-Conversion, VFI 

Newave_TDS_CPS_10K_40K_GB_220605.DOC Page 1 

Printed in Switzerland – Modifications reserved


TECHNICAL SPECIFICATIONS 

10, 15, 20, 30 and 40 kVA (three phase input and output) 

GENERAL DATA 

Output Rated Power kVA 10 15 20 30 40 

Output Power Factor 0.8 

Topology On-Line, Double Conversion, VFI 

Technology Second Generation, Tansformerless 

For redundancy and/or capacity: 

Parallel Configuration (optional) 

Double Conversion AC-AC efficiency with batt.fully 

charged 

- Standard up to 10 modules 

- Without limitation on request 

100%/75%/50%25% Linear Load (cos =0.8ind) % 94.5/94.5/93/91 94.5/94.5/93/91 94.5/94.5/93/91 95/95/93.5/92 95/95/93.5/92 

100%/75%/50%/25% Linear Load (Resistive cos =1) % 94/94/92/90 94/94/92/90 94/94/92/90 94/94/92.5/91 94/94/92.5/91 

100%/75%/50%/25% Non-linear Load (EN 62040-1- 

1:2003) 

% 93/93/91/90 93/93/91/90 93/93/91/90 93/93/92/91 93/93/92/91 

Eco-mode efficiency (load on by-pass) at 100% load % 98 98 98 98 98 

Heat Dissipation With 100% Load (cos =0.8ind) W 400 600 800 1200 1600 

Heat Dissipation With 100% Load (Resistive cos =1) W 480 720 960 1450 1920 

Heat Dissipation With 100% Non-linear Load 

(EN 62040-1-1:2003) 

Airflow (25° - 30°C) with Non-linear load 

(EN 62040-1-1:2003) 

W 560 840 1120 1680 2240 

m 3 /h 110 150 200 300 400 

Audible Noise with 100%/50% Load dBA 55/49 57/49 57/49 59/51 63/53 

Ambient Temperature for UPS °C 0 – 40 

Ambient Temperature for Batteries (recommended) °C 20 – 25 

Storage Temperature °C -25 - +70 

Battery Storage Time at Ambient Temperature Max. 6 months 

Cooling Fan-assisted 

Relative Air-humidity Max. 95% (non-condensing) 

Standards 

- Safety EN 62040-1-1:2003, EN 60950-1:2001/A11:2004 

- Electromagnetic Compatibility 

EN 50091-2:1995, EN61000-3-2:2000, EN6100-3-3:1995/A1:2001, EN61000- 

6-2:2001, EN61000-6-4:2001 

- Performance EN62040-3:2001 

Transportation Palette Provided with UPS 

Accessibility Front and right side access for service and maintenance 

Positioning Min. 10cm rear space (required for fan) 

Input and Output Power Cabling From front and bottom 

Dry Port (Volt-free contacts) For remote signalling and automatic computer shutdown 

Smart Port (RS 232) For monitoring and integration in network management 

Input Terminals 


Printed in Switzerland – Modifications reserved 

EMERGENCY OFF (Normally closed) 

GEN-ON (Normally open) 

BATTERY TEMPERATURE SENSOR


RECTIFIER DATA 

Input Voltage V 3x380/220V+N, 3x400V/230V+N, 3x415/240V+N 

For Loads:


POWER MANAGEMENT DISPLAY (PMD) 

The user-friendly PMD consists of three parts the MIMIC DIAGRAM, CONTROL KEYS and LCD that provides 

the necessary monitoring information about the UPS. 

MIMIC DIAGRAM 

The mimic diagram serves to give the general status of the UPS. The LED-indicators show the power flow 

status and in the event of mains failure or load transfer from inverter to bypass and vice-versa the 

corresponding LED-indicators will change colour from green (normal) to red (warning). The LED’s LINE 1 

(rectifier) and LINE 2 (bypass) indicate the availability of the mains power supply. The LED’s INVERTER and 

BYPASS if green indicate which of the two are supplying power to the critical load. When the LED-indicator 

BATTERY is lit it means that the battery due to mains failure is supplying the load. The LED-indicator ALARM is 

a visual indication of any internal or external alarm condition. At the same time the audible alarm will be 

activated. 

PUSHBUTTONS 

The pushbuttons serve to manage the UPS by performing commands. The 2xON/OFF pushbuttons serve to 

start-up or shutdown the UPS if pressed simultaneously. The pushbuttons UP and DOWN allow working 

through the PMD-menu. The RESET pushbutton serves to cancel the audible alarm in the event of a 

disturbance. If the alarm condition was only transient the LED-indicator ALARM would also extinguish otherwise 

it will remain on (red). 

DISPLAY 

The 2 x 20 character LCD simplifies the communication with the UPS. The menu driven LCD enables the 

access to the EVENT REGISTER, or to monitor the input and output U, I, f, P, Autonomy Time and other 

Measurement’s, to perform commands like start-up and shut-down of INVERTER or load transfer from 

INVERTER to BYPASS and vice-versa and finally it serves for the DIAGNOSIS (SERVICE MODE) for 

adjustments and testing (for more details see the USER MANUAL of ConceptpowerTM ). 

Power Management Display (PMD) of Conceptpower TM 

OPTIONALS 

Extended Battery Autonomies In matching battery frames CBAT-30C,CBAT-30GU and 

CBAT-M 

Optional Battery Charger For longer autonomies 

Remote Signalling Panel (RSP) For UPS-Status indication 

Parallel Configuration A number of units may be paralleled 

for redundancy or capacity upgrade 

Wavemon Software For automatic shut-down and monitoring 

SNMP – Card/Adapter For network management and remote monitoring 

Input or Output Isolation Transformer For special voltages or for galvanic isolation 

Customized UPS- and Battery Frames On request (for OEM-Projects only) 


Printed in Switzerland – Modifications reserved


MECHANICAL CHARACTERISTICS Slim Line 

MODEL kVA 10 15 20 30 40 

Dimensions (WxHxD) mm 550 x 1400 x 750 550 x 1800 x 750 

Protection Degree IP 20 

Ventilation Fan assisted 

Colour RAL 9002 

Foot Print m 2 0.41 

Maximum Output Power of one Slim Line UPS 30 kVA 40 kVA 

Dimensions of Concept Power Slim-Line (Depth 750mm) for 10-30kVA 

Slim-Line Frame: CUPS-30S 

550 mm 

550 mm 

1400 mm 

Battery Frame CBAT-30CS 

580 mm 

1400mm 


Power 

(kVA) 

Power 

(kVA) 

Autonomy 

(min.) 

Maximum 

Autonomy 

(min.) 


Battery 

Type 

Maximum 

Battery 

Frame 

Type 

Frame 

Type 

UPS + 

Battery 

Weight 

(kg) 

10 132 90x24Ah CBAT-30C 1140 

15 78 90x24Ah CBAT-30C 1140 

20 53 90x24Ah CBAT-30C 1140 

30 32 90x24Ah CBAT-30C 1140 

Weight 

(kg) 

10 0 ____ CUPS-30S 180 

10 10 40 x 7Ah CUPS-30S 280 

10 16 (2x30) x 7Ah CUPS-30S 330 

10 24 (2x40) x 7Ah CUPS-30S 380 

10 40 (3x40) x 7Ah CUPS-30S 

15 0 ____ 

CUPS-30S 

480 

185 

15 10 (2x30) x 7Ah CUPS-30S 335 

15 14 (2x40) x 7Ah CUPS-30S 385 

15 24 (3x40) x 7Ah CUPS-30S 485 

20 0 ____ CUPS-30S 185 


20 16 (3x40) x 7Ah CUPS-30S 485 

30 0 ____ CUPS-30S 190 


In the Battery Frame CBAT-30CS and up to 

90 x 24Ah / 28Ah may be fitted. 

The maximum achievable autonomy with one 

additional Battery Frame CBAT-30CS are:


Dimensions of Concept Power Slim-Line (Depth 750mm) for 40kVA 

Slim-Line Frame: CUPS-40S 

550 mm 

550 mm 

1800 

Battery Frame CBAT-M 

580 mm 

1800 


Power 

(kVA) 

Power 

(kVA) 

Autonomy 

(min.) 


Maximum 

Autonomy 

(min.) 

Battery 

Type 

Maxim 

um 

Battery 

40 25 (2x50)x 

24Ah 

40 42 (3x50)x 

24Ah 

Frame 

Type 

CBAT- 

M 

2x 

CBAT-M 

Frame 

Type 

UPS + 

Battery 

Weight 

(kg) 

1350 

1990 

Weight 

(kg) 

40 0 ____ CUPS-40S 260 

40 8 (3x50) x 7Ah CUPS-40S 640 

40 12 (4x50) x 7Ah CUPS-40S 770 

In the Battery Frame CBAT-M up to 

100 x 24Ah / 28Ah may be fitted. 

The maximum achievable autonomy with one 

additional Battery Frame CBAT-M are:


Block Diagram Slim-Line 

Cable E 

Fuse E 

STANDARD VERSION (SINGLE INPUT FEED) 

Fuse A 

Cable A 

F4 

Slim Frame 

F1 F2 

UPS System 1 

Rectifier 

Inverter 

Static Switch 

F3 

MAINS (3x380V/220V, 

3x400/230V,3x415/240 

Mainten. Bypass 

Load 

Cable Sections and Fuse Ratings recommended by European standards. 

Alternatively, local standards to be respected 

STANDARD VERSION (SINGLE FEED INPUT) 

Cable D 

Power (kVA) Fuse A (Agl/CB) Cable A (IEC 60950-1:2001) Cable D (IEC 60950-1:2001) Fuse E +/N/- Cable E +/N/- 

10 3x20 5x2.5 5x2.5 3x32A 3x4 

15 3x25 5x4 5x4 3x63A 3x10 

20 3x40 5x6 5x6 3x63A 3x10 

30 3x63 5x10 5x10 3x80A 3x16 

40 3x80 5x25 5x25 3x100A 3x25 

VERSION ON REQUEST (DUAL FEED INPUT) 

Cable E 

Fuse E 

Power Fuse B Cable B 

Fuse C 

Cable C 

Cable D Fuse E Cable E 

(kVA) (Agl/CB) (IEC 60950-1:2001) (Agl/CB) (IEC 60950-1:2001) (IEC 60950-1:2001) +/N/- +/N/- 

10 3x20 5x2.5 3x20 4x2.5 5x2.5 3x32A 3x4 

15 3x25 5x4 3x25 4x4 5x4 3x63A 3x10 

20 3x40 5x6 3x40 4x6 5x6 3x63A 3x10 

30 3x63 5x10 3x63 4x10 5x10 3x80A 3x16 

40 3x80 5x25 3x80 4x25 5x25 3x100A 3x25 

The Conceptpower Slim-Line UPS’s may be paralleled for power capacity upgrade or redundancy. The standard 

conceptpower TM Slim UPS is not provided with the parallel option. 

UPS 1 UPS 2 UPS n 



VERSION ON REQUEST (DUAL INPUT FEED) 

Fuse B Fuse C 

Cable B 

F4 

Slim Frame 

F1 F2 

UPS System 1 

Rectifier 

Inverter 

Static Switch 

F3 

Mainten. Bypass 

Load 

Cable C 

Cable D 

MAINS (3x380V/220V, 

3x400/230V,3x415/240V

ConceptpowerTM – Slim 10-40kVA - Atek Teknik A/S

Create successful ePaper yourself

Delete template?

Save as template?