Industrial Power Transmission Products - Bando USA

Synchro-Link ® Double Sided Timing Belts - Polyurethane (Metric)
DT5 - 5mm Pitch for 5mm, 10mm, 15mm, 20mm and 25mm Wide Belts
DT5-300 6.95 0.010 11.73 0.011 17.70 0.016 23.00 0.020 29.67 0.025 11.81 300 60
DT5-410 7.05 0.011 11.82 0.013 17.95 0.018 23.27 0.022 30.04 0.027 16.14 410 82
DT5-460 7.19 0.012 12.00 0.015 18.46 0.020 23.82 0.025 30.78 0.030 18.11 460 92
DT5-480 7.31 0.013 12.37 0.016 18.81 0.021 24.46 0.026 31.60 0.031 18.90 480 96
DT5-515 7.65 0.014 12.92 0.017 19.84 0.022 25.74 0.028 33.25 0.033 20.28 515 103
DT5-550 8.01 0.015 13.20 0.018 20.40 0.024 25.96 0.030 34.60 0.036 21.65 550 110
DT5-590 8.15 0.016 13.56 0.019 20.78 0.026 26.93 0.032 34.90 0.038 23.23 590 118
DT5-620 8.34 0.017 14.11 0.020 21.73 0.027 28.21 0.034 36.55 0.040 24.41 620 124
DT5-650 8.61 0.018 14.57 0.022 22.46 0.029 29.13 0.036 37.79 0.043 25.59 650 130
DT5-700 8.87 0.019 15.02 0.023 23.19 0.030 30.04 0.038 39.02 0.045 27.56 700 140
DT5-750 9.02 0.020 15.57 0.024 24.05 0.032 31.24 0.041 40.67 0.049 29.53 750 150
DT5-800 9.47 0.022 16.40 0.026 24.56 0.035 31.88 0.043 41.49 0.052 31.50 800 160
DT5-815 9.62 0.022 16.40 0.026 25.51 0.035 32.98 0.044 43.14 0.053 32.09 815 163
DT5-860 9.92 0.023 16.76 0.028 26.02 0.037 33.71 0.047 43.97 0.056 33.86 860 172
DT5-900 10.20 0.024 17.42 0.030 27.05 0.039 35.13 0.049 45.81 0.059 35.43 900 180
DT5-940 10.48 0.025 18.08 0.031 28.07 0.041 36.55 0.051 47.64 0.061 37.01 940 188
DT5-1075 11.18 0.029 19.36 0.035 30.32 0.047 39.41 0.058 51.42 0.070 42.32 1075 215
DT5-1100 11.31 0.030 19.60 0.036 30.74 0.048 39.94 0.060 52.12 0.071 43.31 1100 220
* Weights shown are approximate.
Other widths available. Contact BANDO for price and delivery.
106
Fiberglass tensile cord
for increased flexibility
and greater durability.
3.4mm
Part
5mm Wide (5) 10mm Wide (10) 15mm Wide (15)
Number List Price Weight* List Price Weight* List Price Weight*
Nominal Dimensions
5.0mm
5 DT5 - 300 UG
Length in Millimeters
Belt Type DT5 (5.0mm tooth pitch)
Belt Width in mm
Part number includes the width prefix in parenthesis below.
Example: A 5mm wide DT5-300 is part number 5DT5-300UG.
20mm Wide (20) 25mm Wide (25)
List Price Weight*
Part Number Example
List Price Weight*
Pitch
Length
(in)
To find an authorized BANDO distributor, go to www.bandousa.com or call 1-800-829-6612
Pitch
Length
(mm)
Number
of Teeth