Industrial Power Transmission Products - Bando USA

Fiberglass tensile cord
for increased flexibility
and greater durability.
0.140"
124 L 050UG
L - 3/8 Inch Pitch for 1/2", 3/4" and 1" Wide Belts
0.375"
124L 8.23 0.020 11.70 0.050 14.99 0.070 12.38 33
150L 9.08 0.030 12.98 0.060 16.71 0.078 15.00 40
165L 9.52 0.039 14.28 0.063 19.04 0.082 16.50 44
187L 9.90 0.040 14.85 0.070 19.80 0.090 18.75 50
210L 10.75 0.040 16.13 0.080 21.50 0.100 21.00 56
225L 11.05 0.050 16.58 0.080 22.10 0.110 22.50 60
240L 11.61 0.060 17.42 0.090 23.22 0.120 24.00 64
255L 11.87 0.060 17.81 0.090 23.74 0.130 25.50 68
270L 12.42 0.060 18.63 0.100 24.84 0.130 27.00 72
285L 12.72 0.070 19.08 0.100 25.44 0.140 28.50 76
300L 13.28 0.070 19.92 0.110 26.56 0.150 30.00 80
322L 13.84 0.080 20.76 0.120 27.68 0.160 32.25 86
345L 14.39 0.080 21.59 0.123 28.78 0.170 34.50 92
360L 14.73 0.085 22.10 0.128 29.46 0.170 36.00 96
367L 14.91 0.090 22.37 0.130 29.82 0.180 36.75 98
390L 15.77 0.090 23.66 0.140 31.54 0.190 39.00 104
420L 19.84 0.099 29.76 0.148 39.68 0.198 42.00 112
450L 20.28 0.106 30.42 0.159 40.56 0.212 45.00 120
480L 20.79 0.120 31.19 0.170 41.58 0.240 48.00 128
510L 20.99 0.123 31.49 0.183 41.98 0.250 51.00 136
540L 21.42 0.127 32.13 0.197 42.84 0.260 54.00 144
600L 21.63 0.130 32.45 0.210 43.26 0.270 60.00 160
* Weights shown are approximate.
Other widths available. Contact BANDO for price and delivery.
Synchro-Link ® Belt Handling
Nominal Dimensions
Part Number Example
To find an authorized BANDO distributor, go to www.bandousa.com or call 1-800-829-6612
0.065"
Width/Construction Code
Belt Pitch
Length in Inches x 10
Part number includes the width/construction suffix in parenthesis below.
Example, a 1/2" wide 124L is a part number 124L050UG.
Part
1/2" Wide (050UG) 3/4" Wide (075UG) 1" Wide (100UG)
Number List Price Weight* List Price Weight* List Price Weight*
Pitch
Length
(in)
Number
of Teeth
BANDO Synchro-Link ® handling during storage and shipping requires some additional precautions to ensure
optimum belt life.
A. Synchro-Link ® belts should be stored and packaged in such a way as to avoid any sharp bends or “crimping”
which will cause internal damage to the belt tension members.
B. Store Synchro-Link ® belts where they are protected from extremes in temperature, high ambient moisture or
direct sunlight.
93
Synchro-Link ® Timing Belts - Polyurethane (RMA)