Download Manual - Janome

More documents

Recommendations

Info

q q w e w 18 Sewing on Heavy Fabrics q Fabric w Black button The black button w on foot A will lock the foot in a horizontal position if you push it in before lowering the presser foot. This ensures even feeding at the beginning of seams and helps when sewing many layers of fabric such as sewing over welt seams when hemming jeans. When you reach the point of an increased thickness, lower the needle and raise the presser foot. Press down on the toe of the foot and push in the black button w, then lower the foot and continue sewing. This button will be released automatically after a few stitches. <strong>Manual</strong> Stitch Length Press “–” or “+” to adjust the stitch length. To decrease length, press “–”. To increase length, press “+”. The pre-programmed stitch length setting is suitable for most of your sewing needs. However, you can change these settings to accommodate different fabric characteristics or achieve a desired effect. Hold down “–” or “+” until you reach the desired setting. * The reverse stitch length cannot be set longer than 1/8˝ (0.3 cm) Variable Needle Position These settings apply only to “straight” stitch patterns #1, #2 and #4. When you select stitch patterns above, you can adjust the left/right needle position. When you press “–”, the needle position will move to the left. When you press “+”, the needle position will move to the right. q Left (0.0) w Middle (3.5) e Right (7.0)
q w e q w e r q w e 19 Pintucking q Stitch pattern: w Thread tension dial: A e Presser foot: Blind hem foot: G Fold the fabric with wrong side together. Place the fabric so that the fold is next to the guide on the presser foot. Lower the foot and sew while guiding the fold along the guide. Open the fabric and press the tucks to one side. Automatic Reverse Stitch q Stitch pattern: w Needle thread tension: A e Presser foot: Zigzag foot: A r Reverse button This reverse stitch can be used for securing, mending or reinforcement stitches. At the end of seams, press the reverse stitch button r once, so that the machine will sew an auto-lock stitch immediately and stop automatically Triple Stretch Stitch q Stitch pattern: w Needle thread tension: A e Presser foot: Zigzag foot: A This strong, durable stitch is recommended when both elasticity and strength are necessary in order to insure comfort and durability. Use it to reinforce areas such as crotch and armhole seams. Also use for extra reinforcement when constructing items such as backpacks.
Page 1 and 2: INSTRUCTION BOOK
Page 3 and 4: SECTION I. NAME OF PARTS Names of P
Page 5 and 6: q w e r t y u i o !0 !1 !2 !3 !4 3
Page 7 and 8: q w e y r q w e t u i 5 Controlling
Page 9 and 10: w e q w r q e q e w 7 Presser Foot
Page 11 and 12: z x q c w e 9 Changing Needle CAUTI
Page 13 and 14: x x z n m v b c 11 • Winding the
Page 15 and 16: v c z x z x c v w z q x c v w e q w
Page 17 and 18: q w r e t q w q w q w 15 • Tensio
Page 19: q w q q e e w e w 17 Using the Seam
Page 23 and 24: z x z x c q w e q w e r t y q w e o
Page 25 and 26: z x c v b n m q w e r 23 Button Sew
Page 27 and 28: c z x c t a s d f y ○ ○ ○ !0
Page 29 and 30: q w e a s d q w e a s d q w e a s d
Page 31 and 32: z z q q w e w e r q w t i w t e q r
Page 33 and 34: z q w e (1) q w r e (2) q x c (1) (
Page 35 and 36: q w e r q e q w e Patchwork q w w w
Page 37 and 38: q w e Decorative Stitch Pattern wit
Page 39 and 40: z x c v b c u q w y y r t r e z r x
Page 41 and 42: Problems and Warning Signals If a b
Page 43: 807-800-047 Printed in Taiwan

Download Manual - Janome

Create successful ePaper yourself

Delete template?

Save as template?