SAP Printing Customer documentation Volume 2 : [ZA0x] The ... - ELP

SAP Printing: Customer documentation: Volume 2: [ZA0x] page 17 / 59
TRYB7 (DEVICE-SPECIFIC) &l25H
TRYEN Envelope Feeder &l6H
TRYME Manual Envelope Feeder &l3H
TRYMN Bypass / Manual Tray &l2H
TRYST (DEVICE-SPECIFIC) &l0H
=== Miscellaneous / Other ===
RESET
RSTND
S>
SABLD execute macro 2 (*1,*4) &f2y2X
SAOFF execute macro 1 (*1,*4) &f1y2X
SAULN
SESCP
SLAND &l1O
SLINE
SPAGE
SPORT &l0O
SPMDU &l1S
SPMSI &l0S
SPMTU &l2S
SUL> &d@
SC100 = 12/120" = 10 cpi &k12H
SC120 = 10/120" = 12 cpi &k10H
SC150 = 8/120" = 15 cpi &k8H
SL040 = 12/48" = 4 lpi &l12C
SL060 = 8/48" = 6 lpi &l8C
SL080 = 6/48" = 8 lpi &l6C
Z0xxx === General (proprietary) ===
Z000Y start hex mode (with EOL wrap) &s0CY
Z000Z end hex mode Z
ZBxxx === Barcodes (proprietary) === (*2)
ZCxxx === Color (proprietary) ===
ZCLR0 enter Monochrome mode (Color off) &b1M
ZCLR1 enter Color mode (Color on) &b0M
-- select text color (via palette index) Note: This may not always work, e.g. if the palette is changed by the driver.
ZCXX0 select color with index 0 (Black) *v0S
ZCXX1 select color with index 1 (Red) *v1S
ZCXX2 select color with index 2 (Green) *v2S
ZCXX3 select color with index 3 (Yellow) *v3S
ZCXX4 select color with index 4 (Blue) *v4S
ZCXX5 select color with index 5 (Magenta) *v5S
ZCXX6 select color with index 6 (Cyan) *v6S
ZCXX7 select color with index 7 (White) *v7S
-- select text color (direct via RGB) Note: This redefines palette entry 0.
ZCBLK select color Black *v000a000b000c0I*v0S
ZCBLU select color Blue *v000a000b255c0I*v0S
ZCCYA select color Cyan *v000a255b255c0I*v0S
ZCGRN select color Green *v000a255b000c0I*v0S
ZCMGT select color Magenta *v255a000b255c0I*v0S
ZCRED select color Red *v255a000b000c0I*v0S
ZCWHT select color White *v255a255b255c0I*v0S
ZCYLW select color Yellow *v255a255b000c0I*v0S
ZFxxx === Font select (proprietary) ===
ZF00N Latin-1 (0N
ZF02N Latin-2 (2N
ZF10N Cyrillic (10N
ZF12N Greek (12N
ZF18N Unicode (18N
ZTxxx === Paper type (proprietary) ===
ZTBND Bonds &n5WdBond