SAP Printing Customer documentation Volume 2 : [ZA0x] The ... - ELP

SAP Printing: Customer documentation: Volume 2: [ZA0x] page 49 / 59
- A descriptive Comment
5. Save.
2. To create a new Device format (for a particular device type):
1. See "How to edit a device type" above.
2. Double-click the Device type to modify.
3. Press the "Formats" button.
4. Enter "Change" mode.
5. Right mouse button -> "Create"
6. Select the Format type from the list.
7. If there already exists a similar format, you can copy it:
- Menu : "Device type formats" : "Copy format"
- Specify source Device type and Format
Otherwise, for each action to be used, see "How to add or edit an Action" below.
8. Save.
Note: (*)
For which settings should be made in case of X_ll_cc, please see the corresponding section below.
5.1.9 How to edit a Device format
1. See "How to edit a device type" above.
2. Double-click the Device type to modify.
3. Press the "Formats" button.
4. Enter "Change" mode.
5. Double-click the Format to modify.
6. See "How to add or edit an Action" below.
7. Save.
5.1.10 How to add or edit an Action
1. See "How to edit a Device format" above.
2. To add an action:
- Right mouse button -> "Create action"
- Specify a name and a description
- Activate it.
To modify the action, double-click it.
3. Specify the command sequence. (*)
For the command sequence needed in an action, please see the corresponding information in Volumes 2 and 3.
4. Save.