1957 chevrolet sedan - Classic Auto Air
1957 chevrolet sedan - Classic Auto Air
1957 chevrolet sedan - Classic Auto Air
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MOUNTING BRACKET<br />
LT<br />
Locate the radiator bulkhead hole template. Tape the template<br />
to the bulkhead as shown.<br />
Carefully drill the (1) 5/8” dia. hole and the ¾” dia hole.<br />
#10 X ¾” HEX<br />
SCREW<br />
MOUNTING BRACKET<br />
RT<br />
Locate the Condenser supplied in kit, (2) Mounting Brackets Left, (2) Mounting Brackets Right,<br />
and (8) #10 x 3/8” hex head screws.<br />
Attach left and right brackets 4 th hole from the top, and 4 th hole from the bottom.<br />
Turn the condenser over. Locate the Liquid<br />
Tube (Condenser to Drier), Liquid Tube<br />
(Receiver to Bulkhead), Discharge Tube, (3) #6<br />
o-rings, (1) #8 o-ring, Receiver Drier, the Drier<br />
Mounting bracket, and (2) #10 x 3/8” hex head<br />
screws.<br />
Attach components listed above to the<br />
condenser. Install all tubes with o-rings and a<br />
few drops of mineral oil.<br />
22
Change language