STEEL GUIDE - BlueScope Distribution

Medium, Heavy & Extra Heavy Pipes.
STEEL PIPE - Medium - Heavy - Extra Heavy - AS1163 C250L0 & GRD250.
Nominal Outside Wall Quantity Common Black Galvanized
Sling
Size Diameter Thickness per Sling Description Plain Ends.
Dimension
(NB) mm mm kg/m Sling Mass kg/m Sling Mass mm x mm
10 * 17.2 2.3 217 Medium 0.839 1.184 0.885 1.248 300 x 260
* This item is sourced locally and is now supplied as 17.2mm O.D. x 2.3mm W.T. and to an in house specification - TS22.
15 # 21.3 2.6 217 Medium 1.21 1.690 1.24 1.735 362 x 316
# Item no longer offered in screwed one end or screwed both ends and may also be subject to minimum order quantities.
2.6 Medium 1.56 1.290 1.60 1.321
20 26.9 3.2 127 Heavy 1.87 1.540 1.92 1.585 350 x 306
4.0 X - Heavy 2.26 1.866 n/a n/a
25
33.7
3.2
4.0
91
Medium
Heavy
2.41
2.94
1.420
1.730
2.47
3.00
1.460
1.770
371 x 326
32
42.4
3.2
4.0
61
Medium
Heavy
3.10
3.80
1.230
1.500
3.18
3.87
1.260
1.530
382 x 336
3.2 Medium 3.57 1.410 3.65 1.450
40
48.3 4.0 61 Heavy 4.38 1.730 4.46 1.770 435 x 383
5.4 X-Heavy 5.71 2.264 n/a n/a
3.6 Medium 5.03 1.210 5.14 1.240
50
60.3 4.5 37 Heavy 6.19 1.490 6.30 1.510 422 x 374
5.4 X-Heavy 7.31 1.780 n/a n/a
3.6 Medium 6.43 1.550 6.56 1.580
65
76.1 4.5 37 Heavy 7.93 1.910 8.07 1.940 533 x 472
5.9 X-Heavy 10.2 2.543 n/a n/a
4.0 Medium 8.37 1.030 8.53 1.050
80
88.9 5.0 19 Heavy 10.3 1.280 10.5 1.300 445 x 397
5.9 X-Heavy 12.1 1.494 n/a n/a
90 101.6
4.0
5.0
19
Medium
Heavy
9.63
11.9
1.190
1.470
9.81
12.1
1.210
1.490
508 x 454
100 114.3
4.5
5.4
19
Medium
Heavy
12.2
14.5
1.500
1.700
12.4
14.7
1.530
1.820
572 x 510
125 139.7
5.0
5.4
13
Medium
Heavy
16.6
17.9
1.400
1.510
16.9
18.1
1.430
1.530
699 x 382
150 165.1
5.0
5.4*
10
Medium
Heavy
19.7
21.3
1.280
1.380
20.0
21.6
1.300
1.400
660 x 451
The 10NB pipe may be supplied as an alternative section and therefore sizes may vary from listing above.
Please note, 150NB Heavy Pipe * is a non-preferred section and therefore subject to minimum ordering requirements.
Tip:- Galvanized pipe that needs to be powder coated, should be first degassed to avoid "cratering" of the finished surface.
Manufactured to Australian Standards
AS 1074 Steel tubes and tubulars for ordinary service.
AS 1163 Structural steel hollow sections (Grade C250L0).
Medium pipes 20NB - 50NB Shaded, may be supplied as GRD250
AS/NZS 4792 (Section 2) HDG 300: Hot-dipped galvanized.
L0 - Pronounced, "L Zero", is the lowest ambient temperature to which these products had been tested.
HotDipGal pipe has an average coating mass of 300 g/m².
Unless noted, pipes are supplied as 6.500 metre lengths
Standard Pipe End Colour Codes.
Blue - Medium
Red - Heavy
White - X-Heavy
1