STEEL GUIDE - BlueScope Distribution

Wall Sheeting.
Walling Profiles only
BMT Mass Width of Depth Walls
Coverage of Rib Single End Internal
mm kg/m 2 Wall Sheetings & Polycarbonate® Sheeting.
Max recommended spacing of
supports for normal conditions
Walls
mm mm Spans mm Spans mm Spans mm
Wallclad® 0.35 3.60 762 16 2100 2400 2400
(Corrugated) Recommended 4 screws/m² Not suitable for curving.
Trimwall® 0.35 3.60 762 29 2100 2900 3000
Recommended 4 screws/m²
Panelrib® 0.35 3.20 850 4 1100 1200 1200
0.42 3.80 850 4 1200 1200 1200
Recommended 4 screws/m²
Multiclad® 0.35 3.30 840 12 1400 1800 1800
0.42 3.90 840 12 1700 1800 1800
Recommended 4 screws/m²
Mini Orb® 0.42 4.00 820 6 1200 1500 1500
0.48 4.50 820 6 1500 1500 1500
Recommended 8 screws/m²
0.48mm thickness may be curved to 150mm radius.
Easyclad Hi-Ten® 0.42 4.50 300 19 - 1500 1500
2P 300 Recommended 6 screws/m²
TRANSLUCENT & POLYCARBONATE ® Roof and Wall Sheeting & Safety Mesh.
Custom Orb® Trimdek Hi-Ten®
Spandek Hi-Ten®
Klip-Lok 406®
Flatdek® Klip-Lok 700 HS® Safety Roof Mesh
Thickness - 2400 g/m 2 for all, 1800g/m 2 & 3050g/m 2 Greca ® (Roma)
subject to enquiry.
Lengths- Maximum length is 12200 mm - Longer lengths subject to manufacturers enquiry.
Colours - Clear, Opal all profiles, Lite Green only available in Custom Orb® and Trimdek® Hi-Ten.
Add translucent sheeting to the roof or walls and brighten the interior of any building.
Great for industrial sheds and warehouses.
Fasteners - All screws should have 32 mm Weatherlok Washers or refer to manufacturers specifications.
Use similar screws as you would for metal claddings.
Safety Mesh.
Safety -
It is recommended that roofing mesh be installed under all translucent sheeting.
74