STEEL GUIDE - BlueScope Distribution

Welded Floor Grating.
How to read Welded Grating Product Coding
A S 30 32 5
Cross Bar Serrated Load Bar Load Bar Load Bar
Pitching Load Bars Pitching Depth Thickness
Cross Bar Pitch A = 100mm Centres B = 50mm Centres
Load Bar Finish Load bars may be supplied in a plain finish or in a serrated form.
Load Bar Pitch Series 30 - 30mm Centres, Series 40 - 40mm Centres, Series 60 - 60mm Centres.
Load Bar Size From 20 x 3mm to 65 x 5 mm. Cross Bars from 6mm square and twisted.
Sheet (Mat) Sizes - Approximately 6.000m in Length, widths may vary but approximately 1.055m wide.
Floor Grating Step Treads.
Photos for illustration.
Fibreglass Floor Gratings.
Photos for illustration.
Welded Floor Grating.
Finish
Black or
Galvanized
Floor Grating Step Treads.
49
Step Tread Legend.
PT1 - Welded Fixing - no nosing
PT2 - Bolted Fixing - no nosing
PT3 - Welded Fixing - Floor plate nosing
PT4 - Bolted Fixing - Floor plate nosing
PT5 - Welded Fixing - abrasive nosing
PT6 - Bolted Fixing - abrasive nosing
PT7 - Welded Fixing - perforated nosing
PT8 - Bolted Fixing - perforated nosing
Recommended Maximum Lengths
Load Bar Size 25x5 32x5 40x5
Series 30 900 1300 1600
Series 40 750 1200 1500
Series 50 500 800 1300
Fibreglass Floor Grating.
Fibreglass Gating details.
Two depths available (25mm & 38mm)
Two resin systems.
Type "I" uses isopthalic polyester resin
and provides excellent corrosion resistance
properties against a range of chemicals.
Type "V" uses a vinyl ester resin base
with superior corrosion resistance to acidic
environments and moderate resistance to
caustic and solvent applications.
Type "I" is Green - Type "V" is Yellow. Fibreglass Grating Stairs also available.
Please check all sizes at placement of your order as supplier measurements may vary.