Wirecast User guide PDF - Telestream

172
Using the Source Settings
IP Cameras
window:
Click Add Shot
menu
Select an IP
Camera
IP Cameras are usually auto-detected by Wirecast, but if not detected they can be
manually set up. To do this, select New IP Camera from the Sources menu in the Main
window. Then, in the Source Settings window, select an IP camera from the list of
devices, enter the IP Address of the camera, optionally check Use Audio, and click Apply:
Select IP
Camera
Enter the IP
Address
Check Add Audio
(optionally)
Click Apply
Wirecast User Guide | 99755