Installation & Instruction Manual - Standard Change

3.0 LOCK OPERATION
T-handle Lock Operation
The T-handle lock that the Modular Machine Series is equipped with provides quick and easy access to
the interior of the changer with maximum security. To disengage the lock it is only necessary to unlock
the mechanism and turn the handle counter clockwise until it disengages from the interior lock
mechanism (approximately five turns), then pull the door open. The lock handle must be parallel to the
floor for the lock to disengage on MC100, MC200, MC400RL, MC700 and MC900 cabinets; the lock
must be perpendicular to the floor on the MC300RL and MC500RL-DA cabinet. To lock the door, turn
the handle parallel to the floor then push the door closed. The lock will be automatically engaged as the
door is closed. If the door is pushed all the way closed, it will only be necessary to turn the handle a
couple of turns until the lock tightens. The lock handle can then be pushed into the recess of the door,
securely locking the cabinet. See photos below of lock t-handle and plug locks.
Lock T-Handle
Without Plug Lock
Top – Medeco Plug Lock w/keys (Optional)
Bottom – Ace Plug Lock w/keys (Standard)
WARNING!
Do not place cabinet lock keys inside the changer as they may be inadvertently locked inside.
SUGGESTION: Place the extra key and key number tag to the changer in a safe place in the event it is
needed at a later date.
21