Installation & Instruction Manual - Standard Change
Installation & Instruction Manual - Standard Change
Installation & Instruction Manual - Standard Change
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Bill Dispenser Cassette Magnets<br />
Use the procedure below to set the “cartridge position” magnets. These magnets are used to make sure<br />
the cassettes are not inadvertently placed into the wrong location in the dispenser. If a replacement<br />
cassette is used, you may need to relocate the magnets. A flash code “39” on the bill dispenser control<br />
box (silver box w/red reset button) indicates that the wrong cassette (or cassette w/wrong magnet<br />
pattern) was installed in the dispenser.<br />
Push<br />
Button<br />
To Open<br />
Bend Tabs<br />
To Insert or<br />
Remove<br />
Magnets<br />
39<br />
Open Position<br />
IMPORTANT NOTE: The magnets are polar sensitive. The face of the magnet is painted white. Be<br />
sure to install the magnet face in the same direction as it was in when you moved the magnet to a new<br />
spot.<br />
a b c d<br />
Slot locations for magnets.<br />
See label inside.<br />
White<br />
Face<br />
Magnet<br />
Magnets shown in “a” and “b” slots.<br />
Magnets