Installation & Instruction Manual - Standard Change
Installation & Instruction Manual - Standard Change
Installation & Instruction Manual - Standard Change
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting Power To The Machine<br />
The machine can be connected to a standard 115VAC power outlet. We strongly recommend a dedicated<br />
line to the breaker panel. If the machine is located in a harsh electrical environment, or if dedicated line<br />
is not feasible, the use of a high quality surge suppressor (same as used for home computers) is<br />
recommended. If hardwiring of the machine is necessary, a qualified electrician should perform it.<br />
Loading The Coin Dispenser<br />
Loading the coin dispenser is a simple task. For coins contained in a bank bag, grasp the neck of the<br />
bank bag and twist it to choke the mouth of the bag. Invert the bag and insert the neck of the bag into<br />
the top of the coin dispenser. Loosen your grip on the bag neck slowly, letting coins feed down into<br />
the dispenser. The table below shows a convenient filling level for the various standard coin<br />
dispensers. When possible, you can turn your bank bags inside out and lessen the chance of small<br />
strings and threads from accumulating in your coin dispenser. Clean coffee cans or plastic pails can<br />
also be used to fill the coin dispensers.<br />
Type No. of Coins Value<br />
Nickel Dispenser 3,800 $190<br />
Dime Dispenser 7,800 $780<br />
Quarter Dispenser 3,200 $800<br />
Dollar Dispenser 2,400 $2,400<br />
Modular<br />
Coin<br />
Dispenser<br />
Loading the Bill Dispenser Cartridge<br />
If your machine is equipped with a bill dispenser read this section carefully. Bill dispenser reliability is<br />
directly related to the condition of the bills loaded into the dispenser as well as to the care taken when<br />
loading them. Several models and brands of bill dispensers are available. Identify the one included in<br />
your machine using the pictures below and become familiar with the bill loading process.<br />
Basic considerations for any bill dispenser are as follows:<br />
• BILL CONDITION - Bills that are in average to good condition will dispense more reliably than<br />
heavily worn bills with folds and creases in them. Optimum performance of the bill dispenser is<br />
5<br />
Push Button<br />
(Reset)<br />
Quick view of<br />
coins remaining<br />
Status LED<br />
(Yellow)<br />
Power LED<br />
(Green)<br />
Coin Out LED<br />
(Red)
Change language