 Apple Technician Guide MacBook Pro (17-inch, Mid ... - tim.id.au

4 With computer closed
and flat on table,
check alignment
where the display
meets the top case.
5 If necessary, slightly
loosen the two
center screws, adjust
alignment, and
resecure screws.
6 With the proper
alignment verified,
install the remaining
screws (3-6) in the
order shown while
the computer is still
closed.
Replacement Caution:
When connecting the
LVDS and camera cables,
make sure they are fully
connected.
Replacement Caution:
Make sure cable is fully
connected (no gold traces
visible).
2010-06-11
MacBook Pro (17-inch, Mid 2010) Take Apart — Display Assembly 162