29.03.2013 Views

 Apple Technician Guide MacBook Pro (17-inch, Mid ... - tim.id.au

 Apple Technician Guide MacBook Pro (17-inch, Mid ... - tim.id.au

 Apple Technician Guide MacBook Pro (17-inch, Mid ... - tim.id.au

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

2010-06-11<br />

3. Reseat original memory and/or<br />

swap in known-good memory<br />

to isolate bad memory and<br />

replace defective parts.<br />

4. Hold the Alt (Option) key<br />

during startup and verify there<br />

is a bootable hard drive shown<br />

in Startup Manager. Choose<br />

original hard drive. Verify if<br />

system can start up from this<br />

drive.<br />

5. Insert product OS install disc<br />

in optical drive. Install disc<br />

is bootable and should be<br />

present in Startup Manager.<br />

Verify if system can start up<br />

from OS install disc.<br />

6. Boot from a known-good<br />

bootable copy of product OS<br />

on a USB drive or network<br />

server to start up and verify<br />

internal mass storage devices<br />

are available using System<br />

<strong>Pro</strong>filer and Disk Utility.<br />

7. Troubleshoot optical drive<br />

cable connection, optical cable<br />

failure or optical drive failure<br />

step by step:<br />

-Reseat optical drive cable and<br />

retest,<br />

-Replace with known-good<br />

optical drive cable and retest,<br />

-Test with known-good optical<br />

drive.<br />

Yes Original memory defective<br />

and replaced. Continue to<br />

verify startup process. Go to<br />

step 4<br />

No Should known-good memory<br />

fail in one or more slots,<br />

replace logic board.<br />

Yes System starting up from<br />

original hard drive. Startup<br />

issue resolved<br />

No Original hard drive not<br />

present or does not start up<br />

from this drive. Continue to<br />

find bootable device. Go to<br />

step 5<br />

Yes Starts up from optical drive;<br />

original hard drive not yet<br />

bootable, go to step 8<br />

No Computer has no internal<br />

bootable devices. Test<br />

external startup devices, go<br />

to step 6<br />

Yes System started up from<br />

external device and reports<br />

data regarding internal SATA<br />

devices. Go to step 7<br />

No No startup devices available.<br />

Replace logic board<br />

Yes Cable reseat solved issue.<br />

Continue to verify hard drive<br />

issues, go to step 8<br />

Defective optical drive cable<br />

found and replaced. Continue<br />

to verify hard drive issues, go<br />

to step 8<br />

Defective optical drive found<br />

and replaced. Continue to<br />

verify hard drive issues, go to<br />

step 8<br />

X02<br />

M07<br />

M02<br />

X03<br />

<strong>MacBook</strong> <strong>Pro</strong> (<strong>17</strong>-<strong>inch</strong>, <strong>M<strong>id</strong></strong> 2010) Symptom Charts — Startup and Power Issues 28<br />

J03<br />

No Replace logic board M19

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!