GENERAL CATALOGUE

204
1090/667
1090/669
Network
*Till end of stock
CCTV
1090/667*
One-channel Ethernet Codec MPEG4 interface.
The 1090/667 Ethernet interface is capable of digitising images from an analogue source
and transmitting them on an Ethernet using TCP/IP protocol. The device exploits
a MPEG4 compression algorithm. Hardware and software capable of recording excellent
quality 25 images and transmitting them simultaneously to multiple remote stations.
It allows to send a composite video signal from professional cameras or video
surveillance apparatuses on an Ethernet. Other capabilities include remote management
of 4 interfaces at the same time using the provided software, actuation of technological
apparatuses, recording to remote PC and new Urmet Easy Dome remote control
and management.
- Configuration and management via Intranet/Internet
- LAN RJ-45 port
- Video inputs: 1 video composite
- Motion detector included
- 25 frames per second
- Remote display via dedicated Browser or Viewer
- May be integrated in WEB MANAGER software
- Limited band use
- 2 alarm inputs and 2 outputs (remotely activatable)
- User friendly configuration
1090/669*
Four-channel Codec MPEG4 video server.
The 1090/669 video server is capable of making 4 video signals remotely accessible
on a network. By using the integrated Ethernet board, images may be managed
and displayed on network of local PCs (Ethernet) or on the Internet. Transmitted images
are displayed using a Browser (Explorer, Netscape, etc.) and therefore no additional
software on the PC is required.
- Video input: 4 on BNC
- Compression algorithm: MPEG4
- Number of frames: 25 total
- Management via Intranet/Internet
- Motion detection function
- Management of 1 Easy Dome
- 4 inputs and 2 alarm outputs
NOTE: do not use in parallel to Dome control panels