BROOKHAVEN TWO DRAWER FILE - Whalen Style
BROOKHAVEN TWO DRAWER FILE - Whalen Style
BROOKHAVEN TWO DRAWER FILE - Whalen Style
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>BROOKHAVEN</strong> <strong>TWO</strong> <strong>DRAWER</strong> <strong>FILE</strong><br />
“ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE<br />
OF SMALL PARTS, SHARP POINTS, SHARP EDGES”<br />
If you have any questions regarding assembly or if you are missing parts,<br />
do not return this item to<br />
Sam’s Wholesale Club<br />
Please call our customer service number and have your instructions and<br />
parts list ready to provide the model name,<br />
part name or factory number:<br />
1-866-942-5362<br />
Pacific Standard Time: 8:30 am - 4:30 pm Monday to Friday<br />
<strong>Whalen</strong> Furniture Mfg. Inc.<br />
Factory No. 6-1559<br />
Page # 1
WARNING!<br />
FURNITURE TIPPING RESTRAINT<br />
YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE<br />
AND YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH<br />
THIS UNIT TO THE WALL, TO PREVENT ACCIDENTS AND/OR<br />
INJURIES.<br />
THIS HARDWARE, MUST BE PROPERLY INSTALLED (FOLLOW<br />
ALL DIRECTIONS IN ORDER ON THIS INSTRUCTIONS), TO<br />
PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING<br />
OF FURNITURE DUE TO IMPROPER USE.<br />
THIS PRODUCT IS ONLY A DETERRENT. IT IS NOT A<br />
SUBSTITUTE FOR PROPER ADULT SUPERVISION.<br />
Please call for replacement parts or assistance: 1-866-942-5362<br />
<strong>Whalen</strong> Furniture Mfg. Inc.<br />
Factory No. 6-1559<br />
Page # 2
Parts List<br />
Please read completely through the instructions and verify that all parts<br />
listed are present before beginning assembly.<br />
A- File Cabinet (1)<br />
1- Plastic Anchor (1) 2- Bracket (2)<br />
3- Long Screw (1) 4- Short Screw (1)<br />
5- Nylon Restraint (1) Touch Up Pen (1)<br />
Tools Required: Phillips Screwdriver, Mallet, Power Drill, 3/8” Drill Bit<br />
A Touch-Up Pen has been provided to repair any small nicks or<br />
scratches that may occur during assembly or shipping.<br />
Please call for replacement parts or assistance: 1-866-942-5362<br />
<strong>Whalen</strong> Furniture Mfg. Inc.<br />
Factory No. 6-1559<br />
Page # 3
If you required to remove the drawers with ball bearing<br />
slides from the unit please follow the below steps to<br />
prevent any damage to the slides or the drawers.<br />
1. If you required to remove the Drawer please pull the drawer all the<br />
way out, then push the plastic tab of the ball bearing slide up on<br />
one side and down in the other side, and then pull the drawer<br />
completely out. See detail #A.<br />
2. To place the drawer back just simply push the ball bearing cart all<br />
the way to the end of the slide (in both sides), and align the slides on<br />
the drawer with the slides on the unit and push it carefully inside<br />
until stop. See detail #B.<br />
Note: If they do not go smoothly please take out and<br />
repeat step.<br />
Please call for replacement parts or assistance: 1-866-942-5362<br />
<strong>Whalen</strong> Furniture Mfg. Inc.<br />
Factory No. 6-1559<br />
Page # 4
Assembly Instructions<br />
1. Unpack the unit and confirm you have all the hardware and parts required.<br />
Note: Must install the wall mounting hardware with the products in use.<br />
2. Position the File Cabinet (part A) close to the wall in your desired location.<br />
3. Attach one of the mounting Brackets (part 2) securely to the back edge of the<br />
furniture with the Short Screw (part 4).<br />
4. Determine where furniture is to be placed and mark location on the wall for<br />
the mounting Bracket screw hole approximately 2” below the Bracket (part 2)<br />
mounted to the edge of the furniture.<br />
5. Drill a 3/8” hole in the wall. Press the Plastic Anchor (part 1) into the hole and<br />
gently tap until the flange of the anchor is against the wall surface.<br />
6. Position the Bracket (part 2) over the Plastic Anchor (part 1) and use the Long<br />
Screw (part 3) to securely attach the Bracket (part 2) to the wall.<br />
7. Place the furniture so the Bracket in the back edge is in line with the Bracket<br />
in the wall.<br />
8. Lace an end of the Nylon Restraint (part 5) strap down through each Bracket.<br />
Bring both ends together and slice the beaded end of the strap through the<br />
keyhole shaped slot on the other end until snug. Pull down on the beaded end<br />
until it snaps lock into the keyhole slot.<br />
9. To double lock return the beaded end back through the keyhole as shown.<br />
10. Check to make sure the strap is securely laced and locked to the Brackets.<br />
Your assembly should now be complete.<br />
Thank you for your purchase.<br />
Please call for replacement parts or assistance: 1-866-942-5362<br />
<strong>Whalen</strong> Furniture Mfg. Inc.<br />
Factory No. 6-1559<br />
Page # 5