Blaster – 3 Assembly Manual Contents 1. Parts and Materials list ...

ePAPER READ

DOWNLOAD ePAPER

fvk.de

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Install elevator & rudder pushrods

1) Gather 2 pushrods with clevises and heat shrink tubes.

2) Glue clevises to one side of the pushrods with thin CA.

Install elevator & rudder pushrods 1) Gather 2 pushrods with clevises and heat shrink tubes. 2) Glue clevises to one side of the pushrods with thin CA. 12

3) Slide heat shrink tube over the joint and drop CA inside the tube. 4) Glue sleeve pieces along the boom at 40…50mm (1.5…2”) distance. 13

Page 1 and 2: Blaster - 3 Assembly Manual Content
Page 3 and 4: 14) Aileron pushrods 15) Rudder & e
Page 6 and 7: Install radio gear 1) Cut the lugs
Page 9 and 10: Install aileron pushrods 1) Mount t
Page 11: 4) Install the vertical stabilizer
Page 16: Setup the plane We recommend progra

Blaster – 3 Assembly Manual Contents 1. Parts and Materials list ...

Create successful ePaper yourself

Delete template?

Save as template?