ANSI/NIST-ITL 2-2008 - National Institute of Standards and ...

Part 2 ANSI/NIST-ITL 2-2008
generated subsystem designator that uniquely identifies the originator's equipment. Complex
element , if used, shall have the simple
element , which will contain the subsystem designator datum.
E
Text
88
214.2.7.2 Element
Cross-reference: Part 1, Section 14.2.11 Field 9.011 Minutiae ridge count indicator (RDG)
This mandatory single-character element shall be used to indicate the presence of minutiae ridge
count information. A "false" in this element indicates that no ridge count information is available.
A "true" indicates that ridge count information is available.
true
214.2.7.3 Element
Cross-reference: Part 1, Section 14.2.8 Field 9.008 Core position (CRP)
This element is optional for fingerprint minutiae, and may not appear at all for palmprint minutiae.
If this element is used, it shall contain the X and Y coordinate position of the core of a fingerprint.
The X value shall be coded as a four-digit ASCII number in the
child element. The Y value shall be coded as a fourdigit
ASCII number in the child element. Multiple
occurrences of the core position complex are allowable.
0035
0045
214.2.7.4 Element
Cross-reference: Part 1, Section 14.2.9 Field 9.009 Delta(s) position (DLT)
This element is optional for fingerprint minutiae, and may not appear at all for palmprint minutiae.
If this element is used, it shall contain the X and Y coordinate position of each delta that is
present on the fingerprint. The X value shall be coded as a four-digit ASCII number in the
child element. The Y value shall be coded as a fourdigit
ASCII number in the child element. Multiple
occurrences of the delta position complex are allowable.
59