DRIESCHER MINEX® and G·I·S·E·L·A® One system, all possibilities.

Special tasks require special
solutions.
Cable
distribution cubicle
(up to 36 kV)
Fuse cabinet
(12-24 kV)
To find individual solutions for special tasks is a forte
of DRIESCHER. Our engineers are experienced, to develop
special designs according to customer requirements,
where others have already ceased.
The realization takes place in our flexible and highly contemporary
manufacturing according to highest standards
and in best quality.
SF 6-insulated switchgear
type G·I·S·E·L·A ®
The SF6-insulated switchgear types G·I·S·E·L·A ® are identical
in construction as the switchgear type MINEX ® , and
have therefore the following advantages:
■ SF6 as insulating- and quenching medium. The
quenching arc takes place in separate, hermetically
sealed arcing chambers.
■ Pluggable connecting cones. An exchange of the
connecting cones is possible without any problems
also at site.
The same data and constructions are valid as per the
MINEX ® -switchgear. The only difference therein is, that at
an internal arc the switchgear opens via a burst disc, and
therefore the effects to the ambience are to be considered
particularly. All G·I·S·E·L·A ® constructions are IAC-classified
(20 kA / 1 s). This is also valid for the metering cubicles.
For installation in substations of other makes or housings,
the pressure resistance of the building has to be clarified
with the respective manufacturer.
By-pass unit
Bus bar pick-off
on right side
(up to 24 kV)