DRIESCHER MINEX® and G·I·S·E·L·A® One system, all possibilities.
DRIESCHER MINEX® and G·I·S·E·L·A® One system, all possibilities.
DRIESCHER MINEX® and G·I·S·E·L·A® One system, all possibilities.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1700<br />
Unlimited combination-<strong>possibilities</strong> due<br />
to modular construction of the cubicles.<br />
C<br />
≤ 24kV<br />
C<br />
≤ 24kV<br />
C<br />
≤ 36kV<br />
L1<br />
L2 L3<br />
C<br />
≤ 40,5kV<br />
L1<br />
L2 L3<br />
T<br />
≤ 24kV<br />
T<br />
≤ 36kV<br />
210 315 400 520 370 400 460 520 370<br />
L1 L2<br />
L3<br />
CB<br />
≤ 36kV<br />
CB<br />
≤ 40,5kV<br />
2 x 20 mm for the outer w<strong>all</strong>s has to be added to the cubicle width per switchgear combination.<br />
C = cable cubicle, T = transformer cubicle, CB = circuit breaker cubicle, VSS = vacuum safety switch cubicle<br />
SF6 as insulating- <strong>and</strong><br />
quenching medium<br />
The quenching arc takes place in separate, hermetic<strong>all</strong>y<br />
sealed arcing chambers. That means the quenching<br />
medium <strong>and</strong> the insulating medium are arranged in separate<br />
sections, independent from each other. The full<br />
switching capacity is always guaranteed.<br />
Pluggable cones with<br />
highest safety<br />
VSS<br />
≤ 24kV<br />
The cones for the cable connection or switchgear extension<br />
are made of reinforced cycloalyphatic exposy<br />
resin. An electrode for capacitive coupling is embedded<br />
in the epoxy resin, arranged in par<strong>all</strong>el to the live<br />
part of the bushing. By using high-quality exposy resins<br />
<strong>and</strong> latest cast-iron technology, a maximum possible<br />
safety is guaranteed regarding the insulation strength<br />
of the dielectric <strong>and</strong> the protection against accidental<br />
contacts.
Change language