Plastics PRAXIS - PFERD
Plastics PRAXIS - PFERD
Plastics PRAXIS - PFERD
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PFERD</strong> Tools – Catalogues 201-209<br />
Catalogue 202 – Hole Cutters, Hole Saws and Step Drills<br />
26<br />
8 mm<br />
35 mm<br />
Recommendations for use<br />
Tungsten carbide hole cutters<br />
Professional tool for the fast and precise cutting of round cut outs . Thanks to their<br />
wear-resistant tungsten carbide cutting edges and high concentricity (cutting head<br />
and shank are made of one piece), tungsten carbide hole cutters are perfect for the<br />
economic processing of fibre-reinforced duroplastics and thermoplastics with and<br />
without fibre reinforcement .<br />
They are used both on portable and stationary machines . <strong>PFERD</strong> has two tungsten<br />
carbide hole cutters to choose from:<br />
■■ Flat type (8 mm tool height) for use on flat products, available in different<br />
diameters from 16 to 105 mm .<br />
■■ Long type (35 mm tool height) for work on pipes and curved surfaces, available in<br />
various diameters from 16 to 60 mm .<br />
HSS hole saws<br />
Designed to saw round cutouts rapidly and accurately, these tools feature variablepitch<br />
teeth of high-grade HSS steel for guaranteed cost-efficiency, especially on<br />
thin-walled components made of duroplastics and thermoplastics with and without<br />
fibre reinforcement .<br />
<strong>PFERD</strong> supplies HSS hole saws in the diameter range from 14 to 152 mm .<br />
HSS step drill HICOAT ®<br />
■■ TC hole cutters and HSS hole saws are for suitable for general use except for on<br />
elastomers .<br />
■■ HSS step drills are suitable for general use except for on elastomers and Plexiglas .<br />
■■ Thanks to their low wear characteristics, tungsten carbide hole cutters are particularly<br />
suitable for processing highly abrasive materials such as duroplastics with<br />
fibre reinforcement .<br />
Our experienced field staff and members of the technical service team will be happy to<br />
advise you . Please do not hesitate to contact us .<br />
These rugged high-performance tools feature a special wear-resistant coating . They<br />
are suitable for drilling and deburring of duroplastics and thermoplastics with and<br />
without fibre reinforcement, up to a maximum material thickness of 4 mm .<br />
<strong>PFERD</strong> has two HSS step drills to choose from:<br />
■■ Drilling range 4 to 20 mm (9 drilling steps)<br />
■■ Drilling range 4 to 30 mm (14 drilling steps)<br />
Note<br />
For further<br />
information refer<br />
to our <strong>PFERD</strong><br />
Tool Manual,<br />
Catalogue 202 .<br />
Burrs<br />
202
Change language