Plastics PRAXIS - PFERD

PFERD supplies a comprehensive selection of tool drives for economic use to match the
tool range and its RPM and output ranges . It complies with the valid “EC Machinery
Directive 2006/42/EC” (Machine Safety Law GPSGV) .
The processing of duroplastics, thermoplastics or elastomers and the different
work processes make the optimum combination of tool and tool drive necessary .
PFERD Tools – Catalogues 201-209
Catalogue 209 – Tool Drives
Tasks and applications Belt grinders Angle grinders
Trimming and cutting to size - x
Cutout work - x
Deburring x x
Fine and finishing work x x
Tool drive Belt grinders Angle grinders
Air grinders
Rotational speed range: 3 .500 to 80 .000 RPM
Belt speed: 16 to 31 m/s
Power output: 75 to 1 .000 Watt
■■ For tools used only in one single speed
range .
■■ Preferably for tools with an RPM
requirement exceeding 36 .000 RPM .
Electric grinders
Rotational speed range: 900 to 20 .000 RPM
Belt speed: 5 to 16 m/s
Power output: 500 to 1 .530 Watt
■■ Coarse to fine grinding using the same
machine; speed range to be selected
accordingly .
■■ Ideal for mobile use .
Flexible shafts and flexible shaft drives
Flexible shaft drives with single-phase or
three-phase motors .
Rotational speed range: 0 to 36 .000 RPM
Power output: 500 to 6 .100 Watt
■■ Capability to deliver high power at low
speeds .
■■ A broad selection of PFERD tools can
be used in this RPM range .
Note
For further
Platzhalter
für Titel
information refer
to our PFERD
Tool Manual,
209 I 1
Catalogue 209 .
Belt grinder Angle handpiece
Tool Drives
Tool Drives
209
209
37