CADD Standards Manual - Delaware Department of Transportation
CADD Standards Manual - Delaware Department of Transportation
CADD Standards Manual - Delaware Department of Transportation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DelDOT <strong>CADD</strong> <strong>Standards</strong> <strong>Manual</strong><br />
Chapter 4 ‐ DelDOT Menu Bar<br />
To ensure consistency and uniformity while placing graphics into a MicroStation design<br />
file, DelDOT has developed a custom menu bar that makes use <strong>of</strong> the BARMENU MDL<br />
application. This custom menu bar is referred to as the DelDOT Menu Bar and is generally<br />
used to define the standard symbology (level, color, line style and weight) for all elements<br />
contained within a file.<br />
This chapter provides details about the DelDOT Menu Bar settings, including:<br />
Menu Layout<br />
Plan Types<br />
Common Tools<br />
Info Resources<br />
Menu Layout<br />
The DelDOT Menu Bar contains a minimum <strong>of</strong> three drop down menus. The Plan Type,<br />
DelDOT Common and Info menus are static menus and contain the same content<br />
regardless <strong>of</strong> the plan sheet type that has been selected.<br />
Figure 11 ‐ Default DelDOT Menu Bar<br />
The fourth drop down menu is discipline or sheet specific and is either populated<br />
automatically upon opening a design file, provided the design file follows the DelDOT<br />
naming convention established earlier in this manual, or set manually by the user as<br />
needed. Ex: TS.dgn will add the Typical Sections menus and tools to the DelDOT Menu Bar<br />
as shown in Figure 12.<br />
Figure 12: DelDOT Menu Bar Set for Typical Sections Sheets.<br />
4‐1
Change language