BUILDINGS – SoR: 2012-2013

More documents

Recommendations

Info

Building Items (Civil) – Buildings SoR: 2012-13 Sl. No Item Code Description of item Unit SS RATE FOR 20012-13 1 2 3 4 5 507 BMT-K.90 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 16 mm thick 1 sqm 469.00 508 BMT-K.91 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 20 mm thick 1 sqm 586.00 509 BMT-K.92 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 25 mm thick 1 sqm 733.00 510 BMT-K.93 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 30 mm thick 1 sqm 876.00 511 BMT-K.94 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 40 mm thick 1 sqm 1171.00 512 BMT-K.95 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD-6 mm thick 1 sqm 541.00 513 BMT-K.96 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD-8 mm thick 1 sqm 584.00 514 BMT-K.97 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD- 10 mm thick 1 sqm 627.00 515 BMT-K.98 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD- 12 mm thick 1 sqm 686.00 516 BMT-K.99 PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD- 16 mm thick 1 sqm 763.00 517 BMT-K.100 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 10’X4’- 6mm thick 1 sqm 193.00 518 BMT-K.101 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 10’X4’- 8mm thick 1 sqm 258.00 519 BMT-K.102 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 10’X4’- 10mm thick 1 sqm 316.00 520 BMT-K.103 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 10’X4’- 12mm thick 1 sqm 378.00 521 BMT-K.104 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 3. Murk Standard size 8’X4’ 10’X4’- 16mm thick 1 sqm 498.00 522 BMT-K.105 V-Board-Cement Bonded Board - 4mm Thick 1 Sqm 123.00 523 BMT-K.106 V-Board-Cement Bonded Board - 6mm Thick 1 Sqm 178.00 524 BMT-K.107 V-Board-Cement Bonded Board - 8mm Thick 1 Sqm 228.00 525 BMT-K.108 V-Board-Cement Bonded Board - 10mm Thick 1 Sqm 263.00 526 BMT-K.109 V-Board-Cement Bonded Board - 12mm Thick 1 Sqm 327.00 527 BMT-K.110 V-Board-Cement Bonded Board - 14mm Thick 1 Sqm 366.00 528 BMT-K.111 V-Board-Cement Bonded Board - 16mm Thick 1 Sqm 417.00 529 BMT-K.112 V-Board-Cement Bonded Board - 18mm Thick 1 Sqm 472.00 530 BMT-K.113 V-Board-Cement Bonded Board - 20mm Thick 1 Sqm 500.00 531 BMT-K.114 Laminate Sheets - Glossy Finish: 1.00 mm thick 1 Sqm 313.00 532 BMT-K.115 Laminate Sheets - Glossy Finish: 1.50 mm thick 1Sqm 450.00 533 BMT-K.116 Laminate Sheets - Glossy Finish: 1.80 mm thick 1Sqm 493.00 534 BMT-K.117 Laminate Sheets - Mat Finish: 1.00 mm thick 1 Sqm 334.00 535 BMT-K.118 Laminate Sheets - Mat Finish: 1.50 mm thick 1 Sqm 464.00 536 BMT-K.119 Laminate Sheets - Mat Finish: 1.80 mm thick 1Sqm 501.00 537 BMT-K.120 Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 351.00 538 BMT-K.121 Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 646.00 L PLYWOOD 539 BMT-L.01 3 Ply - 4 mm thick Plywood(IS:303) MR Grade 1 Sqm 309.00 540 BMT-L.02 5 Ply - 6 mm thick Plywood(IS:303) MR Grade 1 Sqm 340.00 541 BMT-L.03 5 Ply - 8 mm thick Plywood(IS:303) MR Grade 36 1 Sqm 400.00
Sl. No 37 Building Items (Civil) – Buildings SoR: 2012-13 Item Code Description of item Unit SS RATE FOR 20012-13 1 2 3 4 5 542 BMT-L.04 5 Ply - 9 mm thick Plywood(IS:303) MR Grade 1 Sqm 400.00 543 BMT-L.05 9 Ply - 12 mm thick Plywood(IS:303) MR Grade 1 Sqm 503.00 544 BMT-L.06 9 Ply - 15 mm thick Plywood(IS:303) MR Grade 1 Sqm 740.00 545 BMT-L.07 9 Ply - 18 mm thick Plywood(IS:303) MR Grade 1 Sqm 725.00 546 BMT-L.08 3 Ply - 4 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 353.00 547 BMT-L.09 5 Ply - 6 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 414.00 548 BMT-L.10 5 Ply - 8 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 516.00 549 BMT-L.11 5 Ply - 9 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 487.00 550 BMT-L.12 9 Ply - 12 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 636.00 551 BMT-L.13 9 Ply - 15 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 914.00 552 BMT-L.14 9 Ply - 19 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 917.00 553 BMT-L.15 3 Ply-4 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 457.00 554 BMT-L.16 5 Ply - 6 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 595.00 555 BMT-L.17 5 Ply - 9 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 763.00 556 BMT-L.18 9 Ply - 13 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 972.00 557 BMT-L.19 5 Ply - 9 mm thick Both sides Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 995.00 558 BMT-L.20 9 Ply - 12 mm thick Both sides Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1160.00 M CEILINGS, WALL PARTITIONS & WALL LININGS 559 BMT-M.01 Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 12.5 mm thick as per IS 2095 -1992 1 Sqm 220.00 560 BMT-M.02 Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 9 mm thick as per IS 2095 -1992 1 Sqm 215.00 561 BMT-M.03 Gypsum Board Plain sheet 12.5 mm thick as per IS 2095 -1993 1 Sqm 200.00 562 BMT-M.04 G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm 1 RM 65.00 563 BMT-M.05 G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick 1 RM 74.00 564 BMT-M.06 G.I. Intermediate Section 45 mm x 15 mm x 15 mm x 0.9 mm 1 RM 73.00 565 BMT-M.07 G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm (web) of 0.55 mm thick 1 RM 65.00 566 BMT-M.08 G.I.-Precoated Fine line Grid 25 mm x 25 mm x 0.7 mm 1 RM 36.00 567 BMT-M.09 G.I.-Precoated Fine line Grid 15 mm x 25 mm x 0.7 mm 1 RM 33.00 568 BMT-M.10 GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm thick 1 RM 47.00 569 BMT-M.11 Hot dipped GI Angle - Precoated - Grid: 19 mm x 19 mm 1 RM 35.00 570 BMT-M.12 Polyester painted GI - T Section - 24 x 32 mm 1 RM 44.00 571 BMT-M.13 Polyester painted GI - T Section - 24 x 25 mm 1 RM 39.00 572 BMT-M.14 Polyester painted GI - T Section - 24 mm x 27 mm 1 RM 40.00 573 BMT-M.15 Aluminium Angle : 24 mm x 24 mm 1 RM 23.00 574 BMT-M.16 Anodised Aluminium T Section : 24 x 24.5 x 2.4 mm 1 RM 30.00 575 BMT-M.17 Connecting Clips 1 Each 2.00 576 BMT-M.18 Rawl Plug 1 Each 1.50
Page 1 and 2: GOVERNMENT OF ANDHRA PRADESH BUILDI
Page 3 and 4: 3 Office of the Chief Engineer (R&B
Page 5 and 6: Sl No 1 BUILDINGS SoR:2012-13 INDEX
Page 7 and 8: 1.0 INTRODUCTION 7 Preamble - Build
Page 9 and 10: 9 Preamble - Buildings SoR: 2012-13
Page 11 and 12: 5.0 CONCLUSION 11 Preamble - Buildi
Page 13 and 14: Sl. No 13 Building Items (Civil) -
Page 35: Sl. No 35 Building Items (Civil) -
Page 87 and 88:
Sl. No 87 Building Items (Civil) -
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Sl NAME OF THE STRUCTURAL MEMBER Ma
Page 95 and 96:
FLOOR LINTELS CENTERING & SCAFFOLDI
Page 97 and 98:
FLOOR LINTELS 97 Building Items (Ci
Page 99 and 100:
99 Building items (Water supply) -
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
SL. NO. ELECTRICAL ITEMS 141 Electr
Page 143 and 144:
PREAMBLE TO ELCTRICAL SOR 2012-2013
Page 145 and 146:
Sl. No. 145 Electrical Items - Buil
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Sl. No. 886 ELEC-3.9.3 Supply and T
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Sl. No. 1250 ELEC-6.4.1 Carryout ro
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Sl. No. 1564 Supply, Transportation
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
267 Common SoR: 2012-13 GOVERNMENT
Page 269 and 270:
Common SoR: 2012-13 Office of the E
Page 271 and 272:
ANNEXURE- A 271 Common SoR: 2012-13
Page 273 and 274:
PREAMBLE 273 Common SoR 2012:13
Page 275 and 276:
maximum out of the allowable percen
Page 277 and 278:
277 Common SoR 2012:13 2) The above
Page 279 and 280:
Sl No. LABOUR RATES CATEGORY OF WOR
Page 281 and 282:
Sl No. CATEGORY OF WORKER 281 Commo
Page 283 and 284:
Sl No. CATEGORY OF WORKER 283 Commo
Page 285 and 286:
The aggregate rates mentioned above
Page 287 and 288:
Sl No. DESCRIPTION OF MATERIAL UNIT
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Sl No: DESCRIPTION OF MACHINERY / E
Page 295 and 296:
Sl No: DESCRIPTION OF MACHINERY / E
Page 297 and 298:
297 Common SoR 2012:13 6 Jaw plates
Page 299 and 300:
6 Electric motor 3 hp (Double Shaft
Page 301 and 302:
301 Common materials - Common SoR:
Page 303 and 304:
Sl. No. Description Unit 303 Common
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Public Health items - Common SoR: 2
Page 315 and 316:
NOTE :- Rock should be measured in
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
NOTE:- The above rates do not inclu
Page 323 and 324:
44 Rates for OHSRs/ELSRs including
Page 325 and 326:
estimate. 6)The above rates shall b
Page 327 and 328:
e with stainless steel of Grade 304
Page 329 and 330:
225 mm dia Metre 227 250 mm dia Met
Page 331 and 332:
150 mm dia Metre 209 200 mm dia Met
Page 333 and 334:
Page 335 and 336:
Sl.No. Description Public Health it
Page 337 and 338:
337 Public Health items - Common So
Page 339 and 340:
339 Public Health items - Common So
Page 341 and 342:
11. SoRATES FOR PRE-STRESSED (NON-C
Page 343 and 344:
4 700 MM DIA PerKM/M 2.60 2.60 2.60
Page 345 and 346:
and cement price of Rs.5,100/- per
Page 347 and 348:
2 3 Cost of laying jointing, testin
Page 349 and 350:
Sl.N o 13. SoRATES FOR BAR WRAPPED
Page 351 and 352:
Note: The above rates of BWSC pipes
Page 353 and 354:
1300 MM DIA Meter 8.00 23277 1300 M
Page 355 and 356:
2100 MM DIA Meter 12.00 46753 2100
Page 357 and 358:
2 Cost of Laying, Jointing, Hydrost
Page 359 and 360:
2.50 times per meter cost of pipe.
Page 361 and 362:
OD 200 mm 821 1050 1259 1699 2073 O
Page 363 and 364:
The IPCL resin cost adopted for the
Page 365 and 366:
OD 315 mm 1405 OD 355 mm 2379 OD 40
Page 367 and 368:
OD 200 mm 1840 OD 225 mm 2610 OD 25
Page 369 and 370:
20 12 25 18 32 29 40 27 44 50 42 68
Page 371 and 372:
Sl. No. OD 200 mm 402 OD 250mm 625
Page 373 and 374:
450 Per KM/RMT 1.50 1.60 1.70 500 P
Page 375 and 376:
4 600 Each 42706 52583 700 Each 509
Page 377 and 378:
400 MM DIA RMT 154 450 MM DIA RMT 1
Page 379 and 380:
Sl. No. Sl. No. 25. SoRATES FOR RUB
Page 381 and 382:
2 Note: 3 Manufacture, Supply and d
Page 383 and 384:
Sl. No. 28. SoRATES FOR C.I. D/F SO
Page 385 and 386:
3 DIA IN MM Rate / Each 80 2,557 2,
Page 387 and 388:
3 4 700 2,09,974 2,31,086 2,62,525
Page 389 and 390:
2 3 300 73,850 1,67,868 83,150 1,76
Page 391 and 392:
Sl. No. 5 2000 33,96,250 36,78,400
Page 393 and 394:
4 5 450 171299 190119 242130 500 17
Page 395 and 396:
DN800 1502108 1502108 DN 900 169799
Page 397 and 398:
Note: The duties and taxes as appli
Page 399 and 400:
CONVEYANCE CHARGES OF MATERIAL 399
Page 401 and 402:
Sl No. A. (LEAD) CONVEYANCE CHARGES
Page 403 and 404:
Sl No. Total lift (Total lift inclu
Page 405 and 406:
Sl. No HIRE CHARGES OF PLANT & MACH
Page 407 and 408:
` Sl. No Description of machinery U
Page 409 and 410:
Copy of GOVERNMENT OF ANDHRA PRADES
Page 411:
(d) Colour Granite of other varieti
show all

BUILDINGS – SoR: 2012-2013

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?