BUILDINGS – SoR: 2012-2013

Sl.
No
50
Building Items (Civil) – Buildings SoR: 2012-13
Item Code Description of item Unit
SS RATE
FOR
20012-13
1 2 3 4 5
661 BMT-N.05 SUPPLY & FIXING or RAJSHRI or equivalent SINGLE SIDE PRELAM
SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and fixing
factory made Pac single side Prelam door frame of the size 50X47
mm with a wall thickness of 5mm, made out of extruded 5mm
rigid Pac single side prelam sheet, meter cut at two corners and
joined with 2nos. of 150mm long brackets of 1515mm MS.Square
tube. The two vertical door profiles are to be reinforced with
19X19mm MS. square tube of 19guage. The door frame shall be
fixed to the wall using 65/100mm long MS. Screws through the
frame by using Pac fasteners. a minimum of 4nos. of screws to be
provided for each vertical member and minimum 2nos. for
horizontal member etc. complete as per manufacture specification
and direction of Engineer-in-charge.
1 Rm 340.00
662 BMT-N.06 Providing and fixing 35mm thick “RAJSHRI” or equivalent BRAND
FACTORY MADE MOULDED DOOR SHUTTER consisting of sold core
single leaf flush door of 30mm thickness, lipped with 15mm
(5mmX3) thick X 30mm width on one stiles and top rails and
10mm (5mmX2) thick X 30mm width on the other stiles and
bottom rails. The inner panel laminated with 2mm thick termite
proof, water proof and fire resistant moulded Pac sheet with 2,4,6
raised panel design in different panel and / or prelam colours on
one side after routing the moulded design on flush door and 2mm
prelam Pac sheet on other side using rubber adhesive on flush
door and solvent cement adhesive on Pac lipping etc. complete as
per direction of Engineer-in-Charge, manufacture specification and
drawing
1 sqm 2900.00
663 BMT-N.07 RAJSHRI or equivalent MOULDED PVC DOOR – WOOD FREE
Providing and fixing 30mm thick Rajshri Brand factory made
Moulded door shutter- wood free consisting of frame made out of
MS. tubes 19gauge thickness and size of 25mmX25mm for stiles,
top and bottom rails. MS. Frame shall have a coat of steel primers.
The inner panel shall consist of 25mm thick High density EPS
conforming to IS 4671-1984 bounded with 2mm thick termite
proof, water proof and fire resistant moulded Pac sheet with 2,4,6
raised panel design in different plain and / or prelam colours after
routing to the moulded design on one side and 2mm plain and / or
prelam Pac sheet on other side of the EPS. The edge of panel to be
sealed with lipping of 10mm wide PVC sheet bottom (made by
sticking 2 rigid foam sheet of 5mm thickness using Pac solvent
cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac
sheet fitted along Ms. Tube for lock provision for lock height 5mm
thick Pac sheet of size 150mmX100mm fixed with upper and lower
face of inner side of EPS Panel etc. Complete as per direction of
Engineer – in-Charge, manufacture specification and drawing
1 sqm 2475.00