Steam or HTHW to Steam Humidifier SKS Series - Humidity Solutions

Positioning the
Humidifier
Ambient
condition
SKS - Steam or HTHW to Steam Humidifier
Stage 1 – Unit Positioning, Mounting and Levelling
SKS humidifier must be installed to ensure the steam hose length is kept to the
shortest possible length.
Maximum steam hose length between the humidifier and the steam distribution
pipes is 5m.
SKS humidifier should be installed with provision for the Steam supply piping
connections and Steam condensate trap installation.
The humidifier should be located in an area that is fully accessible for inspection
and servicing. Observe the minimum access distances as shown in figure 6.
SKS humidifier can be provided with adjustable legs (optional) in order to ensure
proper level when installed directly on the floor.
Provide a level, solid foundation for the humidifier.
Ensure that the floor beneath the humidifier is water proof to withstand any water
spillage during servicing or if a problem occurs.
Ensure that the humidifier is properly attached through its legs using anchors to
the floor.
SKS-200-CHP Models can be ceiling hung by using the appropriate Lifting and
hanging bracket.
SKS humidifier should be levelled, in order to ensure proper slop for condensate
return by heat exchanger.
11
SKS Neptronic
Rod & Nuts
(M10 minimum)
Lifting & Hanging
Bracket
(Fig. 5)
The humidifier location should have an ambient temperature of less than 30˚C.
Minimum
Clearances 0.60m
minimum
0.60m
minimum
0.75m
minimum
0.60m
minimum
1m
minimum
(Fig. 6)
Note: Above minimum clearances are indicated for inspection and servicing access. SKS
Humidifier is designed for a 0 clearance to combustible material.