Glutz Scandinavian Industrial Standard Lines
Glutz Scandinavian Industrial Standard Lines
Glutz Scandinavian Industrial Standard Lines
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Swiss Access Systems<br />
<strong>Glutz</strong> <strong>Scandinavian</strong><br />
<strong>Industrial</strong> <strong>Standard</strong> <strong>Lines</strong>
<strong>Glutz</strong> <strong>Scandinavian</strong><br />
<strong>Industrial</strong> <strong>Standard</strong> <strong>Lines</strong><br />
Table of contents<br />
Information 4 - 7<br />
Roses and escutcheons 10 - 36<br />
Lever handles 38 - 52<br />
Pull handles 54 - 58<br />
Offshore 60 - 62<br />
Miscellaneous 63 - 86<br />
3
Open the door to top quality and security<br />
For almos150 years, <strong>Glutz</strong> has been developing outstanding solutions for security, aesthetics and convenience<br />
in doors and windows. All of our products are characterised by the highest levels of security and outstanding<br />
functionality, combined with perfect design.<br />
Materials and surfaces with a long service life<br />
Materials with a long service life<br />
Stainless steel<br />
<strong>Glutz</strong> products are intended for a long, maintenance-free service life, and this is reflected in the design and materials<br />
used. As a result of this philosophy and a strong presence in the construction industry, stainless steel<br />
traditionally plays a major role in the <strong>Glutz</strong> range of products.<br />
The outstanding properties of stainless steel make it the ideal choice for application as the basic material for<br />
hardware. It is highly durable, scratch-resistant, low-maintenance, hygienic, anti-static, extremely corrosionresistant,<br />
wear-resistant and resistant to the effects of weather and heat.<br />
Over the years, manufacturers and fitters have used various synonyms for stainless steel, such as V2A, V4A and<br />
Inox. However, where consumer goods are concerned, the term ‚stainless steel‘ has become standard. For the<br />
sake of clarity, rust-proof steels may also be identified by a specific material number, e.g. 1.4301.<br />
At <strong>Glutz</strong> , it is precisely this 1.4301 / AISI 304 material that we use for the manufacture of our hardware. To<br />
comply fully with the requirements of certain markets, some products are also available in 1.4404 / AISI 316L,<br />
a significantly higher-grade material.<br />
Surfaces<br />
As a rule, the surfaces on <strong>Glutz</strong> stainless steel hardware are given just a mechanical finishing. Satin finish is the<br />
most common. Special grinding processes create an even, satin finish capable of withstanding external influences<br />
for decades.<br />
Polished stainless steel is a slightly more exclusive surface finish. A number of mechanical operations create a<br />
mirror-smooth, smartly shining surface. The outstanding elegance is, however, somewhat sensitive to scratching.<br />
For this reason, polished stainless steel should preferably be used in situations where its elegance can be<br />
fully appreciated.<br />
In addition to these purely mechanical surface finishes, <strong>Glutz</strong> also offers other finishes. Upon request, all products<br />
can be coated in RAL- or NCS colours or PVD treatment, everything to meet customer requests.<br />
Options<br />
All lever handles with flat end are available with ball end on option.
Fixed connections<br />
With heavy doors and when using door closers, high axial and torsional forces are exerted on the door handle<br />
sets. In order to ensure these components have a high degree of rigidity, the door handles and door knobs must<br />
be fixed with the door handle rose or escutcheon in fixed mobile configuration in addition to the lever handle<br />
square spindle connection.<br />
To this end, <strong>Glutz</strong> has developed the <strong>Glutz</strong> easyfix ® connection.The door handle roses and escutcheons are factory-fitted<br />
with <strong>Glutz</strong> easyfix ® components and are delivered as a complete unit. Together with all usual <strong>Glutz</strong><br />
door handles and door knobs, these parts form the <strong>Glutz</strong> easyfix ® system. Patent protection has been applied for<br />
on this innovative system.<br />
By applying this special interlocking/plug-in connection on all versions, a stable fixed mobile connection of the<br />
door handle or door knob with the door handle roses or escutcheons can be achieved. This system is available<br />
for all products within the professional range. On all other product ranges, fixed mobile is made with a circlip.<br />
The guide elements in the escutcheons and base plates are of consistent dimensions, which enables the use of<br />
different types of bearing - such as <strong>Glutz</strong> glide, <strong>Glutz</strong> needle bearing and of course, the two <strong>Glutz</strong> twin versions.<br />
With the HESO connection system developed by <strong>Glutz</strong> in-house, penetration of the pin occurs during assembly<br />
of the door handle. The door handle set screw thus remains firmly fixed in the specially designed HESO<br />
square profile spindle. If assembly has been performed correctly, it is not possible for the door handle to become<br />
loose. Correct assembly means that the HESO screw is positioned at least 10 mm from the spindle end and is<br />
tightened until it can clearly be felt to penetrate.<br />
HESO handle connection principle Distance for correct assembly Function scheme for <strong>Glutz</strong> easyfix ®<br />
Step 2<br />
Step 1<br />
Step 3
The perfect guide<br />
Door handles from <strong>Glutz</strong> are optimally embedded in their escutcheons and roses by means of <strong>Glutz</strong> sliding bearings<br />
or <strong>Glutz</strong> needle bearings featuring hardened steel needles. Both sliding bearings and needle bearings have<br />
guides which give the hardware a snug-fitting mechanism, ensuring long service life.<br />
The ‚<strong>Glutz</strong> glide‘ high-performance sliding bearing made of high-quality polymer is specially designed to meet<br />
the operating requirements of <strong>Glutz</strong> door handle bearings. ‚<strong>Glutz</strong> glide‘ is self-lubricating; it is designed for dry<br />
operation, and hence completely maintenance-free. It can be applied in normal doors and fire-rated doors alike.<br />
Specially designed for this application, the material is resistant to impact, has high damping properties and is<br />
suitable for application in ambient temperatures of between -40° and +140°.<br />
The compact design of the new <strong>Glutz</strong> needle bearing provides a slim, elegant door handle bearing solution. The<br />
installation of the new <strong>Glutz</strong> needle bearing is externally the same as for the <strong>Glutz</strong> sliding bearing. The low level<br />
of rolling friction on the <strong>Glutz</strong> needle bearing, combined with its high radial load resistance, ensure that <strong>Glutz</strong><br />
needle bearings have a very long service life. Their major benefits are achieved using hardened non-rusting needles.<br />
They are completely maintenance-free and designed for extremely demanding applications. The position of<br />
the guide relative to the plate (external, central, internal) is essential when choosing the correct variant, as is the<br />
handle diameter. Here, the thickness of the door itself and the position of the door lock are important.<br />
As an option <strong>Glutz</strong> escutcheons and roses can also be fitted with ‚<strong>Glutz</strong> twin glide‘ and ‚<strong>Glutz</strong> twin needle bearings‘<br />
. This ‚<strong>Glutz</strong> twin bearing‘ is made up of two bearings arranged within each other. It is specially designed<br />
for extremely demanding operating requirements and loads. Typically, it is used in hospitals, schools, residential<br />
homes, military buildings and industrial buildings. Its twin guide ensures the door handles have optimal guide<br />
length for these application requirements.<br />
The fitter will determine the specifications for the relevant guide variant, particularly in the event of non-standard<br />
equipment.<br />
Guides<br />
<strong>Glutz</strong> glide internal <strong>Glutz</strong> needle bearing (NL) internal <strong>Glutz</strong> glide external <strong>Glutz</strong> NL external<br />
<strong>Glutz</strong> twin glide internal <strong>Glutz</strong> twin NL internal <strong>Glutz</strong> twin glide semi-external <strong>Glutz</strong> twin NL semi-external<br />
<strong>Glutz</strong> twin glide external <strong>Glutz</strong> twin NL external Knob fixing<br />
External guides are also available in conical version
Spindles<br />
When we talk of a spindle, we mean the square profile pin connecting the two door handles inside and outside<br />
firmly together. At <strong>Glutz</strong>, it is the HESO square profile pin with an eccentric drilled hole which fulfils this function<br />
perfectly.<br />
Although this connecting part is nothing much to look at, correct specification requires a certain amount of<br />
specialist skill. The length and thickness of the square profile pin are particularly important, as is the length of<br />
the eccentric hole.<br />
At <strong>Glutz</strong>, we define the length of the square profile pin in mm as the length of the guide plus the length of the<br />
part of the square profile pin protruding from the door-handle.<br />
Defining square profile pin length<br />
HESO square spindles are available from <strong>Glutz</strong> in various standard lengths, but please note that the recommended<br />
standard length can vary depending on the door handle model. <strong>Standard</strong>isation means that the range available<br />
from the retailer covers most requirements.<br />
It is important when ordering to know the thickness of the door, the choice of plate or rose, and the type of guide.<br />
The fitter is responsible for submitting the correct details to <strong>Glutz</strong>. This includes the correct specification of<br />
the square spindle thickness. In the project area you should always use 9 mm square spindles, as they provide<br />
20-25% greater rotating stability than 8 mm square spindels. For fire protection purposes, we recommend the 9<br />
mm square spindle (This is mandatory in Germany).<br />
<strong>Glutz</strong> HESO square spindles are made of galvanised steel or stainless steel at option.<br />
Of course, this by no means exhausts <strong>Glutz</strong>‘s technical knowledge about square spindles. There are other types<br />
of spindle for other functions, e.g. solid square spindles, split square spindles for knobsets, and panic square<br />
spindles combined with a split follower, and many others.
8<br />
Product overview<br />
1. Roses and escutcheons<br />
1.1 Roses<br />
60200<br />
p. 10<br />
60230<br />
p. 16<br />
51007<br />
p. 22<br />
60210<br />
p. 11<br />
1.2 Long plates<br />
60240.46<br />
p. 25<br />
60230.4<br />
p. 17<br />
51008<br />
p. 23<br />
60241<br />
p. 26<br />
60210.4<br />
p. 12<br />
60231.4<br />
p. 18<br />
51008.4<br />
p. 24<br />
60243<br />
p. 27<br />
60211.1<br />
p. 13<br />
60260<br />
p. 19<br />
60243.4<br />
p. 28<br />
60211.4<br />
p. 14<br />
60261<br />
p. 20<br />
60244.1<br />
p. 29<br />
60220<br />
p. 15<br />
60255<br />
p. 21<br />
60244.4<br />
p. 30
60245.9<br />
p. 31<br />
1.3 Backplates and kickplates<br />
60250<br />
p. 35<br />
60270 (for Trio Ving<br />
50 series metal<br />
frame lock)<br />
p. 32<br />
60250.4<br />
p. 36<br />
60271 (for ASSA<br />
metal frame lock)<br />
p. 33<br />
60272 (for Evolution<br />
metal frame<br />
lock)<br />
p. 34<br />
9
10<br />
1.1 Roses Stainless steel lever rose to clips<br />
60200<br />
<strong>Standard</strong> version<br />
• Rose to clip<br />
• ø 53 mm<br />
• Thickness 5.5 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• Base plate on one side with guided cam M4<br />
CN<br />
• Base plate on one side with threaded cam<br />
M4 CG<br />
• Fixing centres 31 mm<br />
• With screws M4 x 50 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• 16 mm twin, semi-outside<br />
• Guide 16 mm for <strong>Glutz</strong> glide
1.1 Roses Stainless steel rose to clips<br />
60210<br />
<strong>Standard</strong> version<br />
• Rose to clip<br />
• ø 53 mm<br />
• Thickness 5.5 mm<br />
• Satin stainless steel<br />
• Base plate on one side with guided cam M4<br />
CN<br />
• Base plate on one side with threaded cam<br />
M4 CG<br />
• Fixing centres 30 mm<br />
• With screws M4 x 50 mm<br />
Cutout<br />
• 60210.0 blind<br />
• 60210.3 Profile cylinder<br />
• 60210.9 Oval cylinder<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
11
12<br />
1.1 Roses Stainless steel toilet rose to clips (for cylinder lock)<br />
60210.4<br />
<strong>Standard</strong> version<br />
• ø 53 mm<br />
• Thickness 5.5 mm<br />
• Satin stainless steel<br />
• Base plate on one side with guided cam M4<br />
CN<br />
• Base plate on one side with threaded cam<br />
M4 CG<br />
• Fixing centres 30 mm<br />
• With screws M4 x 50 mm<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered
1.1 Roses Stainless steel rose to clips<br />
60211.1<br />
<strong>Standard</strong> version<br />
• Rose to clip<br />
• ø 53 mm<br />
• Thickness 5.5 mm<br />
• Satin stainless steel<br />
• Base plate on one side with guided cam M4<br />
CN<br />
• Base plate on one side with threaded cam<br />
M4 CG<br />
• Fixing centres 27 mm<br />
• With screws M4 x 50 mm<br />
Cutout<br />
• 60211.1 Key<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
13
14<br />
1.1 Roses Stainless steel toilet rose to clips (for 2014 lock)<br />
60211.4<br />
<strong>Standard</strong> version<br />
• Rose to clip<br />
• ø 53 mm<br />
• Thickness 5.5 mm<br />
• Satin stainless steel<br />
• Base plate on one side with guided cam M4<br />
CN<br />
• Base plate on one side with threaded cam<br />
M4 CG<br />
• Fixing centres 27 mm<br />
• With screws M4 x 50 mm<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered
1.1 Roses Stainless steel lever rose<br />
60220<br />
<strong>Standard</strong> version<br />
• Lever rose<br />
• ø 53 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• Fixing centres 30 mm<br />
• With screws M4 x 36 mm<br />
Cutout<br />
• 60210.0 blind<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm twin semi outside<br />
15
16<br />
1.1 Roses Stainless steel rose<br />
60230<br />
<strong>Standard</strong> version<br />
• ø 53 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Fixing centres 30 mm<br />
• With screws M4 x 36 mm<br />
Cutout<br />
• 60210.0 blind<br />
• 60230.1 Key<br />
• 60230.9 Oval cylinder<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered
1.1 Roses Stainless steel toilet rose (for cylinder lock)<br />
60230.4<br />
<strong>Standard</strong> version<br />
• ø 53 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Fixing centres 30 mm<br />
• With screws M4 x 36 mm<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
17
18<br />
1.1 Roses Stainless steel toilet rose (for 2014 lock)<br />
60231.4<br />
<strong>Standard</strong> version<br />
• ø 53 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Fixing centres 27 mm<br />
• With screws M4 x 36 mm<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Cutout<br />
• 60210.0 blind<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered
1.1 Roses Stainless steel lever rose for narrow stile doors<br />
60260<br />
<strong>Standard</strong> version<br />
• Length 70 mm<br />
• Width 28 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws M4 x 16 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
19
20<br />
1.1 Roses Stainless steel cylinder rose for narrow stile doors<br />
60261<br />
<strong>Standard</strong> version<br />
• Length 70 mm<br />
• Width 28 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• With screws M4 x 16 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• With snap screws and bush (door thickness<br />
to be specified)
1.1 Roses Stainless steel cylinder rings<br />
60255<br />
<strong>Standard</strong> version<br />
• Cylinder ring ø 55 mm<br />
• Hight (H) 6, 8 , 11, 13, 16, 18 or 21 mm<br />
• Centres 30 mm<br />
• Satin stainless steel<br />
Cutout<br />
Oval cylinder<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Rokoko cutout<br />
21
22<br />
1.1 Roses Stainless steel rose<br />
51007<br />
<strong>Standard</strong> version<br />
• Length 53 mm<br />
• Width 53 mm<br />
• Projection 2 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide<br />
• Fixing holes M4<br />
• Fixing centres 31 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• 16 mm <strong>Glutz</strong> needle bearing<br />
• 16 mm outside<br />
• <strong>Glutz</strong> easyfix ®<br />
• Knob fixing<br />
• Threaded cam M4<br />
51008<br />
Stainless steel cylinder<br />
escutcheon<br />
p.23<br />
51008.4<br />
Stainless steel escutcheons<br />
p.24
1.1 Roses Stainless steel cylinder escutcheon<br />
51008<br />
<strong>Standard</strong> version<br />
• Length 53 mm<br />
• Width 53 mm<br />
• Projection 2 mm<br />
• Satin stainless steel<br />
• Fixing holes M4<br />
• Fixing centres 30/27 mm<br />
Cutout<br />
• 51008.0 blind<br />
• 51008.1 BB standard keyhole<br />
• 51008.9 OVZ oval cylinder<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Threaded cam M4<br />
51007<br />
Stainless steel rose<br />
p.22<br />
51008.4<br />
Stainless steel escutcheons<br />
p.24<br />
23
24<br />
1.1 Roses Stainless steel escutcheons<br />
51008.4<br />
<strong>Standard</strong> version<br />
• Roses for bathrooms 53x53x3mm<br />
• Satin stainless steel CRNI mb<br />
• Outside plate with indicator-emergency release,<br />
with threaded cams<br />
• Threaded cam M4<br />
• Inside plate with turn 5712<br />
• Fixing holes M4<br />
• Spindle 6 mm, 7 mm or 8 mm<br />
• Fixing centres 30 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
51007<br />
Stainless steel rose<br />
p.22<br />
51008<br />
Stainless steel cylinder<br />
escutcheon<br />
p.23
1.2 Long plates Stainless steel long plate<br />
60240.46<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• Lever and 1 x 46 mm at 111 mm centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
25
26<br />
1.2 Long plates Stainless steel long plate<br />
60241<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• With screws 16 mm<br />
Cutout<br />
• 2 x 40.5 mm at 111 mm centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• With snap screws and bush (door thickness<br />
to be specified)
1.2 Long plates Stainless steel long plate<br />
60243<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• 60243.0 Lever only<br />
• 60243.09 Cylinder only<br />
• 60243.9 Oval cylinder<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
27
28<br />
1.2 Long plates Stainless steel long plate<br />
60243.4<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Centres 105 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)
1.2 Long plates Stainless steel long plate<br />
60244.1<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• Lever and keyhole at 72 mm centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
29
30<br />
1.2 Long plates Stainless steel long plate<br />
60244.4<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Centres 72 mm<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)
1.2 Long plates Stainless steel long plate<br />
60245.9<br />
<strong>Standard</strong> version<br />
• Length 206 mm<br />
• Width 60 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• Lever and cylinder at 68 mm centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
31
32<br />
1.2 Long plates Stainless steel long plate for narrow stile doors<br />
60270 (for Trio Ving 50 series metal frame lock)<br />
<strong>Standard</strong> version<br />
• Length 235 mm<br />
• Width 30 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• 60270.09 Cylinder only<br />
• 60270.9 Lever and cylinder at 72 mm<br />
centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)
1.2 Long plates Stainless steel long plate for narrow stile doors<br />
60271 (for ASSA metal frame lock)<br />
<strong>Standard</strong> version<br />
• Length 235 mm<br />
• Width 30 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• 60271.0 Lever only<br />
• 60271.09 Cylinder only<br />
• 60271.9 Lever and cylinder at 115 mm<br />
centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
33
34<br />
1.2 Long plates Stainless steel long plate for narrow stile doors<br />
60272 (for Evolution metal frame lock)<br />
<strong>Standard</strong> version<br />
• Length 235 mm<br />
• Width 30 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
Cutout<br />
• 60272.0 Lever only<br />
• 60272.09 Cylinder only<br />
• 60272.9 Lever and cylinder at 105 mm centres<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)
1.3 Backplates and kickplates Stainless steel square plate<br />
60250<br />
<strong>Standard</strong> version<br />
• Length 200 mm<br />
• Width 200 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
Cutout<br />
• 60250.0 Lever only<br />
• 60250.09<br />
• 60250.9<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)<br />
35
36<br />
1.3 Backplates and kickplates Stainless steel square plate<br />
60250.4<br />
<strong>Standard</strong> version<br />
• Length 200 mm<br />
• Width 200 mm<br />
• Thickness 2 mm<br />
• Satin stainless steel<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
• With screws 16 mm<br />
• Guide 16 mm with needle bearing and<br />
<strong>Glutz</strong> easyfix®<br />
Cutout<br />
• Inside thumb turn<br />
Outside red/green indicator<br />
Handing to be specified<br />
Opening (inside/outside) to be specified<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Guide 16 mm for <strong>Glutz</strong> glide<br />
• 16 mm outside<br />
• 16 mm outside, conical<br />
• 16 mm twin, inside<br />
• 16 mm twin, semi-outside<br />
• 16 mm twin, outside<br />
• With snap screws and bush (door thickness<br />
to be specified)
Product overview<br />
2. Lever handles<br />
2.1 Lever handles<br />
5036 Vienna<br />
p. 38<br />
5072 Memphis<br />
p. 44<br />
6002 A-HUS<br />
p. 50<br />
5037 Florence<br />
p. 39<br />
5073 Banks<br />
p. 45<br />
6018 Allegro<br />
p. 51<br />
5050 Piraeus<br />
p. 40<br />
5093 George<br />
p. 46<br />
5950<br />
p. 52<br />
5062 New Orleans<br />
p. 41<br />
5094 Cape Town<br />
p. 47<br />
5064 Oslo<br />
p. 42<br />
5099 Helsinki<br />
p. 48<br />
5071 Memphis<br />
p. 43<br />
5175 Saarbrücken<br />
p. 49<br />
37
38<br />
2.1 Lever handles Stainless steel lever handle<br />
5036 Vienna<br />
Product profile<br />
Commercial buildings, administrative centres<br />
and superior quality residential developments<br />
<strong>Standard</strong> version<br />
• Lever handle length 125 mm, ø 20 mm<br />
• Projection 50 mm<br />
• Square spindle 8 mm<br />
• Solid satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Version for narrow stile doors<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5036/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
5036-220/5619K<br />
Stainless steel handle<br />
PSK + HST<br />
EN1906<br />
KL 3/4
2.1 Lever handles Stainless steel lever handle<br />
5037 Florence<br />
Product profile<br />
Commercial buildings, administrative centres<br />
and superior quality residential developments<br />
<strong>Standard</strong> version<br />
• Lever handle length 132 mm, ø 22 mm<br />
• Projection 67 mm<br />
• Square spindle 8 mm<br />
• Solid satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Version for narrow stile doors<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5037/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN1906<br />
KL 3/4<br />
39
40<br />
2.1 Lever handles Stainless steel lever handle<br />
5050 Piraeus<br />
Product profile<br />
Commercial buildings, administrative centres<br />
and superior quality residential developments<br />
<strong>Standard</strong> version<br />
• Lever handle length 164 mm, ø 20 mm<br />
• Projection 73 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
*Also available with ball end<br />
5051<br />
5050/5616 CF<br />
Stainless steel lever han- Stainless steel window<br />
dle<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN1906<br />
KL 3/4
2.1 Lever handles Stainless steel lever handle<br />
5062 New Orleans<br />
Product profile<br />
Commercial buildings, administrative centres<br />
and superior quality residential developments<br />
<strong>Standard</strong> version<br />
• Lever handle length 145 mm, ø 20 mm<br />
• Projection 72 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8.5 mm or 9 mm<br />
• With ball end<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Version for narrow stile doors<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
• Admitted, combined with the appropriate<br />
lock as lever handle for emergency exits as<br />
per EN 179: 2002-06 *Also available with ball end<br />
5061<br />
Stainless steel lever handle<br />
5162<br />
Stainless steel lever handle<br />
5062/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN 179<br />
EN1906<br />
KL 3/4<br />
41
42<br />
2.1 Lever handles Stainless steel lever handle<br />
5064 Oslo<br />
Product profile<br />
Hospitals, commercial buildings, administrative<br />
centres<br />
<strong>Standard</strong> version<br />
• Lever handle length 138 mm, ø 20 mm<br />
• Projection 70 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8.5 mm or 9 mm<br />
• With ball end<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Offset version (5059)<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
• Combined with the appropriate lock as lever<br />
handle for emergency exits as per EN<br />
179: 2002-06<br />
*Also available with ball end<br />
5059<br />
Stainless steel metal<br />
frame lever handle<br />
5175<br />
Stainless steel metal<br />
frame lever handle<br />
p.49<br />
5064A/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN 179<br />
EN1906<br />
KL 3/4
2.1 Lever handles Stainless steel lever handle<br />
5071 Memphis<br />
Product profile<br />
Commercial buildings, administrative centres<br />
and superior quality residential developments<br />
<strong>Standard</strong> version<br />
• Lever handle length 130 mm, ø 20 mm<br />
• Projection 55 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8.5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Version for narrow stile doors (5072)<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5072<br />
Stainless steel metal<br />
frame lever handle<br />
p.44<br />
5071/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
5071-280/5613<br />
Stainless steel handle<br />
PSK + HST<br />
EN1906<br />
KL 3/4<br />
5071-280/5619K<br />
Stainless steel handle<br />
PSK + HST<br />
43
44<br />
2.1 Lever handles Stainless steel metal frame lever handle<br />
5072 Memphis<br />
<strong>Standard</strong> version<br />
• Lever handle length 152 mm, ø 20 mm<br />
• Projection 80 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5618C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5071<br />
5073<br />
50661<br />
Stainless steel lever han- Stainless steel lever han- Stainless steel metal<br />
dledle<br />
frame lever handle<br />
p.43<br />
p.45<br />
5071/5616 CF<br />
Stainless steel window<br />
handle<br />
EN1906<br />
KL 3/4<br />
8500<br />
Stainless steel window<br />
drive
2.1 Lever handles Stainless steel lever handle<br />
5073 Banks<br />
Product profile<br />
Residential construction<br />
<strong>Standard</strong> version<br />
• Lever handle length 110 mm, ø 18 mm<br />
• Projection 50 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5071<br />
5072<br />
Stainless steel lever han- Stainless steel metal<br />
dle<br />
frame lever handle<br />
p.43<br />
p.44<br />
5073/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN1906<br />
KL 3/4<br />
45
46<br />
2.1 Lever handles Stainless steel lever handle<br />
5093 George<br />
Product profile<br />
Residential construction<br />
<strong>Standard</strong> version<br />
• Lever handle length 110 mm, ø 18 mm<br />
• Projection 55 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5094<br />
5093/5616 CF<br />
Stainless steel lever han- Stainless steel window<br />
dle<br />
handle<br />
p.47<br />
8500<br />
Stainless steel window<br />
drive<br />
EN1906<br />
KL 3/4
2.1 Lever handles Stainless steel lever handle<br />
5094 Cape Town<br />
Product profile<br />
Commercial buildings, administrative centres<br />
and superior quality residential developments<br />
<strong>Standard</strong> version<br />
• Lever handle length 130 mm, ø 20 mm<br />
• Projection 60 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Version for narrow stile doors<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
5093<br />
5094/5616 CF<br />
Stainless steel lever han- Stainless steel window<br />
dle<br />
handle<br />
p.46<br />
8500<br />
Stainless steel window<br />
drive<br />
EN1906<br />
KL 3/4<br />
47
48<br />
2.1 Lever handles Stainless steel lever handle<br />
5099 Helsinki<br />
Product profile<br />
Residential construction<br />
<strong>Standard</strong> version<br />
• Lever handle length 133 mm, ø 18 mm<br />
• Projection 57 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5620C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
*Also available with ball end<br />
5064<br />
Stainless steel lever handle<br />
p.42<br />
5065<br />
Stainless steel lever handle<br />
5099/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN 179<br />
EN1906<br />
KL 3/4
2.1 Lever handles Stainless steel metal frame lever handle<br />
5175 Saarbrücken<br />
<strong>Standard</strong> version<br />
• Lever handle length 163 mm, ø 20 mm<br />
• Projection 82 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
• Picture shows handle with 5618C rose<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• Square spindle 8,5 mm or 9 mm<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
• Admitted, combined with the appropriate<br />
lock as lever handle for emergency exits as<br />
per EN 179: 2002-06<br />
*Also available with ball end<br />
5064<br />
Stainless steel lever handle<br />
p.42<br />
5065<br />
Stainless steel lever handle<br />
5064A/5616 CF<br />
Stainless steel window<br />
handle<br />
8500<br />
Stainless steel window<br />
drive<br />
EN 179<br />
EN1906<br />
KL 3/4<br />
49
50<br />
2.1 Lever handles Stainless steel lever handle<br />
6002 A-HUS<br />
<strong>Standard</strong> version<br />
• Lever handle length 160 mm, ø 18 mm<br />
• Projection 70 mm<br />
• Square spindle 8 mm<br />
• Satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide /<br />
needle bearing (NL) / easyfix ®<br />
Options<br />
• Polished stainless steel<br />
• RAL lacquered<br />
• PVD lacquered<br />
• 16 mm guide for <strong>Glutz</strong> twin glide<br />
• Lever handle length 140 mm<br />
• With ball end
2.1 Lever handles Stainless steel lever handle<br />
6018 Allegro<br />
Product profile<br />
Banks, commercial buildings, administrative<br />
centres, upmarket housing<br />
<strong>Standard</strong> version<br />
• Lever handle length 160 mm<br />
• Projection 60mm<br />
• Set with spindle 8 mm<br />
• Solid satin stainless steel<br />
• 16 mm guide for <strong>Glutz</strong> glide / easyfix ®<br />
• For door thickness 35 - 45 mm<br />
length of spindle 72 mm<br />
• For door thickness 45 - 55 mm<br />
length of spindle 84 mm<br />
• Right or left must be specified when ordering<br />
• Picture shows handle with 5341S<br />
Note: Only use with flat plates or 2 mm<br />
roses.<br />
Options<br />
• Polished stainless steel<br />
• spindle 8.5 and 9 mm<br />
• Category of use class 4, EN 1906: 2002-05<br />
Quality standard<br />
• Category of use class 3, EN 1906: 2002-05<br />
• Tested for use in fire-rated and smoke protection<br />
doors to DIN 18273: 1997-12<br />
EN1906<br />
KL 3/4<br />
51
52<br />
2.1 Lever handles Stainless steel door stop<br />
5950<br />
<strong>Standard</strong> version<br />
• Door stop ø 45 mm<br />
• Polished stainless steel<br />
• Rubber buffer in white, grey or black<br />
• Wall fixing<br />
• Concealed fixing<br />
5945A<br />
Stainless steel door stop<br />
5945.0<br />
Stainless steel door stop<br />
5946<br />
Stainless steel door stop<br />
5947A<br />
Stainless steel door stop
Product overview<br />
3. Pull handles<br />
3.1 Pull handles<br />
5750/5751<br />
p. 54<br />
5760/5761<br />
p. 55<br />
5765/5766<br />
p. 56<br />
5770/5771<br />
p. 57<br />
5780/5781<br />
p. 58<br />
53
54<br />
3.1 Pull handles Stainless steel pull handles<br />
5750/5751<br />
Product profile<br />
The classic one<br />
<strong>Standard</strong> version<br />
• D = Pull handle ø 19 mm<br />
• Satin stainless steel<br />
• L = Fixing centres:<br />
130, 200, 250, 300, 350, 400 mm<br />
• H = Projection 70 mm<br />
• R = Radius 27mm<br />
Options<br />
• Polished stainless steel<br />
• Other lengths upon request
3.1 Pull handles Stainless steel pull handles<br />
5760/5761<br />
Product profile<br />
For high requirements<br />
<strong>Standard</strong> version<br />
• D = Pull handle ø 25, 31 mm<br />
• Satin stainless steel<br />
• L = Fixing centres:<br />
ø 25: 250, 300, 350 mm<br />
ø 31: 300, 350, 400, 500, 600 mm<br />
• H = Projection:<br />
ø 25 = 75 mm<br />
ø 31 = 80 mm<br />
• R = Radius:<br />
ø 25 = 39 mm<br />
ø 31 = 40 mm<br />
Options<br />
• Polished stainless steel<br />
• Other lengths upon request<br />
55
56<br />
3.1 Pull handles Stainless steel pull handles<br />
5765/5766<br />
Product profile<br />
Straight design<br />
<strong>Standard</strong> version<br />
• D = Pull handle ø 31 mm<br />
• Satin stainless steel<br />
• L = Fixing centres:<br />
ø 31: 300, 350, 400, 500 mm<br />
• H = Projection 80 mm<br />
Options<br />
• Polished stainless steel<br />
• Other lengths upon request<br />
• Other diameters upon request
3.1 Pull handles Stainless steel pull handles<br />
5770/5771<br />
Product profile<br />
Cranked design<br />
<strong>Standard</strong> version<br />
• D = Pull handle ø 25, 31 mm<br />
• Satin stainless steel<br />
• L = Fixing centres:<br />
ø 25: 250, 300, 350, 400 mm<br />
ø 31: 300, 350, 400, 500, 600 mm<br />
• H = Projection:<br />
ø 25 mm = 80 mm<br />
ø 31 mm = 85 mm<br />
• Breadth:<br />
ø 25 mm = 133 mm<br />
ø 31 mm = 150 mm<br />
Options<br />
• Polished stainless steel<br />
• Other lengths upon request<br />
• Other diameters upon request<br />
57
58<br />
3.1 Pull handles Stainless steel pull handles<br />
5780/5781<br />
Product profile<br />
The curved one<br />
<strong>Standard</strong> version<br />
• D = Pull handle ø 25, 31 mm<br />
• Satin stainless steel<br />
• L = Fixing centres:<br />
ø 25: 250, 300, 350, 400 mm<br />
ø 31: 300, 350, 400 mm<br />
• H = Projection:<br />
ø 25 mm = 75 mm<br />
ø 31 mm = 80 mm<br />
• R = Radius 40 mm<br />
Options<br />
• Polished stainless steel<br />
• Other lengths upon request<br />
• Other screw lengths<br />
• Other diameters upon request
Product overview<br />
4. Offshore<br />
4.1 Panic exit devices<br />
8610 Offshore<br />
p. 60<br />
5064/7151 Offshore<br />
p. 61<br />
5920<br />
p. 62<br />
59
60<br />
4.1 Panic exit devices Panic exit devices<br />
8610 Offshore<br />
Product profile<br />
For commercial and public buildings where<br />
the doors are equipped with an antipanic<br />
lockcase. By pressing the bar, the antipanic<br />
lockcase is operated and the room can be<br />
evacuated. Espacially for Offshore platforms<br />
<strong>Standard</strong> version<br />
• Execution without square spindle<br />
• Satin stainless steel<br />
• Bar ø 25 mm, length 1100 mm<br />
• Follower 9 mm<br />
• Case of mechanism fixed on long plates<br />
• Long plate 300x70x4 mm<br />
• Fixing holes M4<br />
• Indications left/right required<br />
• DIN right for right handed doors<br />
• DIN left for left handed doors<br />
• Justable spring load<br />
Cutout<br />
• 8616.00 blind<br />
• 8616.3 PZ<br />
5920<br />
HESO panic-spindle<br />
p.62
4.1 Panic exit devices Offshore Set made of stainless steel<br />
5064/7151 Offshore<br />
<strong>Standard</strong> version<br />
• Lever handle 5064 with special threaded<br />
lever guide for fixed bearing<br />
• 8 oder 9 mm spindle execution<br />
• 80 or 66 mm radius<br />
• Backplate 7151 with special ceramic bearing<br />
• Length 180 mm<br />
• Width 180 mm<br />
• Projection 2 mm<br />
• Satin stainless steel<br />
• Backset 35 mm (7151) and 22 mm (7150)<br />
Cutout<br />
• 7151/7150.0 blank<br />
• 7151/7150.3 PZ 78 mm<br />
• 7151/7150.9 OVZ 95.5 mm<br />
61
62<br />
4.1 Panic exit devices HESO panic-spindle<br />
5920<br />
<strong>Standard</strong> version<br />
• Both sides with groove<br />
• Galvanised / stainless steel<br />
• For locks with split follower<br />
• Adjustable screw M5<br />
• 9x110, 9x170 mm
Product information<br />
Application:<br />
The Topaz line lever handles suit doors in general, commercial and residential areas.<br />
Execution:<br />
These lever handles suitable for door thickness 38-42mm come exclusively in satin stainless steel (sss) with a<br />
brass guide ø16mm and include M4 screw sets (for roses and escutcheons only).<br />
Option:<br />
Fixed mobile<br />
Combinations:<br />
30.010... 8221* - Lever handle pair ø20 mm<br />
30.020... 8621** - Lever handle pair ø20 mm<br />
30.030... 8252 - Lever handle pair ø20 mm<br />
30.040... 8266 - Lever handle pair ø20 mm<br />
30.050... 8249 - Lever handle pair ø20 mm<br />
30.060... 8247 - Lever handle pair ø20 mm<br />
8255 - Lever handle pair ø20 mm<br />
8259 - Lever handle pair ø20 mm<br />
8248 - Lever handle pair ø20 mm<br />
8258 - Lever handle pair ø20 mm<br />
8267 - Lever handle pair ø20 mm<br />
Topaz roses and escutcheons<br />
8221* / 8621**<br />
8225* / 8625**<br />
8228* / 8628**<br />
8223* / 8623**<br />
8226* / 8626**<br />
with rose in combination with 8223, 8224, 8225, 8226, 8228*<br />
with rose in combination with 8623, 8624, 8625, 8626, 8628**<br />
with plate for cylinder c/c 105 mm<br />
with plate for cylinder c/c 95.5 mm<br />
with plate for cylinder c/c 68 mm (2016)<br />
with plate for key c/c 72 mm (2014)<br />
with plate blind<br />
with plate for cylinder ø 46 mm hole<br />
with plate WC red/green c/c 72 mm<br />
with plate WC red/green c/c 105 mm<br />
with plate WC red/green c/c 95.5 mm<br />
8224* / 8624**<br />
* with fixing holes<br />
** with threaded studs
Lever handle range Topaz 30.010 / 30.020 / 30.030 / 30.040 / 30.050 / 30.060<br />
30.010 30.020 30.030<br />
30.040<br />
Topaz plates<br />
8252 (distance 105 mm)<br />
8266 (distance 95.5 mm)<br />
8249 8247<br />
8255<br />
8248<br />
30.050 30.060<br />
8258 (distance 105 mm)<br />
8267 (distance 95.5 mm)<br />
8259
Wirobur coating does not oxidise<br />
High temperature, humidity and a smell of cleanser in the air – that’s what one commonly finds in indoor<br />
swimming pools. What is disagreeable for people also has a negative effect on the surface of hardware fittings<br />
– it oxidises. Indoor swimming pools have a special climate, which affects various materials and damages their<br />
surfaces. Even high-quality stainless steel is subject to chloride corrosion.<br />
For this reason, <strong>Glutz</strong> offers hardware with special Wirobur coating. Wirobur is a surface coating that has been<br />
developed to a very high standard over many years of process development. Multiple layers each between 4-8<br />
microns thick of this corrosion protection coating, are applied to high-alloy steel using the classic PVD process.<br />
Wirobur is the same colour as stainless steel and also provides protection against scratch marks. This means that<br />
fittings look as new, even after they have been in service for a long time.<br />
Foto: aquabasilea AG, www.aquabasilea.ch<br />
<strong>Glutz</strong> hardware with Wirobur coating is protected against chemical processes!<br />
Features of hardware coated with Wirobur:<br />
• Features<br />
Decorative coating on locks and door furniture in swimming pools with a chlorine enriched atmosphere<br />
Protects metals against the effects of aggressive chemicals<br />
Extremely scratch resistant, looks as new, even after a long time in service - without much maintenance<br />
• Other application areas<br />
Pump construction<br />
Hydraulics<br />
Pneumatics<br />
Fine mesh separation process<br />
Cheese dairies
Control components Door components<br />
Choice of options<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation at April 2011<br />
B,D,E<br />
E<br />
A, C<br />
A, C<br />
A, C<br />
Backplate 5370 Backplate 5372 Lever handle Lever handle<br />
Lever handle<br />
5055 Malmö 5062 New Orleans 5065 Rena<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
C<br />
A<br />
B<br />
D E<br />
Whether it is a question of biometric identification or security-tested builders’ hardware, locks or hinge<br />
plates: <strong>Glutz</strong> offers you a rounded, elegant security programme, satisfying all fire & smoke protection,<br />
break-in and escape route standards – all under one roof.<br />
For further information on our security products, visit www.glutz.com<br />
Door hinge<br />
Backplate 5371<br />
Locating element<br />
Strike plate closed Heavy duty<br />
mortice lock<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com
Building access -<br />
Commercial, industrial and residential building<br />
Workplace in the morning, Fitness center during leisure time, own home in the evening: day by day we enter the<br />
most varied buildings without giving so much as a thought as how we enter them. But ingenious access solutions<br />
lay behind what we take for granted in our everyday life.<br />
<strong>Glutz</strong> combines mechanical and electrical engineering in the most secure and up to date way: flexible and timecontrolled<br />
access authorizations which can be assigned via the Internet or SMS from one or more administration<br />
centers. Then, according to situation and requirement, access is obtained via badge, code, fingerprint or a combination,<br />
e.g. code/fingerprint. Multifunctional security-tested door locks and selected security-tested builders’<br />
hardware guarantee that the programmed authorizations are implemented with no ifs or buts and that unauthorized<br />
persons are excluded. With interfaces to door interphone systems (e.g. remote opening facility), letterboxes,<br />
building management systems or time-limited TimeCodes, <strong>Glutz</strong> access solutions leave nothing to be desired.<br />
<strong>Glutz</strong> access solutions – universally simple, secure and elegant in appearance!<br />
The building access solutions are characterized by the following features:<br />
<strong>Glutz</strong> Access Fingerprint<br />
• Access point<br />
Convenient, quick access with code, card or fingerprint<br />
TimeCode process for time-limited access (option)<br />
• Administration<br />
PC software for user administration<br />
<strong>Glutz</strong> Data Server (for client server application)<br />
• <strong>Glutz</strong> Access Controller<br />
Networking via TCP/IP, detailed logfile<br />
Multiple interfaces to: door interphone system, building management system and others<br />
<strong>Glutz</strong> security-tested lock and builders’ hardware<br />
• High-security HZ lock for the access and exit control<br />
Tests: EN 179 and DIN 18251, class 4<br />
Switching off the electrical actuation (option)<br />
Functions: intruder prevention, forced locking, escape route, fire-protection<br />
Combinable with all <strong>Glutz</strong> security-tested builders’ hardware
Control components Door components<br />
<strong>Glutz</strong> Access PC Admin<br />
Software<br />
<strong>Glutz</strong> Access Controller<br />
Extended version E01<br />
<strong>Glutz</strong> Access Touch Admin<br />
Standalone<br />
Choice of options<br />
Bell system via<br />
interphone<br />
Letterbox<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
D<br />
D<br />
B<br />
Whether it is a question of biometric identification or security-tested builders’ hardware, locks or hinge<br />
plates: <strong>Glutz</strong> offers you a rounded, elegant security programme, satisfying all fire & smoke protection,<br />
break-in and escape route standards – all under one roof.<br />
A, E<br />
A, E<br />
A, E<br />
For further information on our security products, visit www.glutz.com<br />
Subject to technical changes<br />
Situation at November 2009<br />
RFID unit<br />
Code + finger-<br />
print units<br />
ES-3 Set<br />
5439S<br />
ES-1 Set<br />
6150S<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
C<br />
Door hinge<br />
A<br />
B<br />
ES-3 builders'<br />
hardware<br />
E<br />
Locating element<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
C<br />
Cable channel<br />
HZ-Lock<br />
D<br />
HZ-Lock
High-quality access control solutions for server<br />
rooms, data media archives, computer centers<br />
Server rooms, data media archives, computer centers and coordinating centers are rooms which are particularly at<br />
risk. The fundamental point being that in such locations, IT equipment and data is present in high concentrations<br />
and extraordinarily high levels of damage could be perpetrated through theft, deliberate destruction, fire and other<br />
hazards, which in extreme cases could lead to the partial paralysis of the business activities. These critical areas can<br />
be secured with <strong>Glutz</strong> Access Products.<br />
<strong>Glutz</strong> biometry solutions offer user-friendly access<br />
and security at the highest level.<br />
The <strong>Glutz</strong> Biometry solution is characterized by thefollowing<br />
features:<br />
• safe personnel control through a combination of<br />
PIN and fingerprint, or contactless identification<br />
and fingerprint<br />
• strict handling of access entitlements through<br />
time limitations and client-specific sequences (e.g.<br />
for non-company personnel)<br />
• functional separation of e.g. organization (responsibility<br />
for security room access) and in-house service<br />
systems (responsibility for access to the building)<br />
• visualization through access-protected, detailed<br />
logfile with movement and system data<br />
• operating units with integrated sabotage protection,<br />
controller in secured area with volatile data<br />
storage (optional)<br />
• Possible integration of client-specific security<br />
functions.
<strong>Glutz</strong> HZ lock ® - multi-point locking – to be on the<br />
safe side<br />
Multifunctional, user-friendly and proven thousands<br />
of times: the <strong>Glutz</strong> HZ-lock ® security door lock is at<br />
the steely heart of <strong>Glutz</strong> access systems.<br />
Combined with the <strong>Glutz</strong> biometry the security door<br />
lock HZ ® is ideal for obtaining a constantly high level<br />
of security.<br />
• self-locking multi-point lock with tested anti-burglary<br />
protection (with ES2 plate up to WK3 and<br />
with ES3 up to WK4)<br />
• suitable for fire and smoke control doors<br />
• emergency door and escape route function<br />
• integrated control and monitoring contacts.<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Giesserei<br />
Oschwandstrasse 20, 3475 Riedtwil, Schweiz<br />
Tel. +41 62 968 17 42, Fax +41 62 968 17 82<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> GmbH Predstavništvo<br />
D. Velemerić 33, 47000 Karlovac, Hrvatska<br />
Tel. +385 47 8017 69, Fax +385 47 8017 68<br />
info@glutz.hr, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
Subject to technical changes<br />
Situation at February 2009
Reduced-ligature fittings<br />
Hospitals, institutions, police, customs & court buildings<br />
Safety-relevant areas in buildings used by patients and inmates require maximum security for the prevention<br />
of self harm. Everything must be considered including the furniture, door and window fittings. At the same<br />
time, it must be possible for staff to carry out their day to day activities without hindrance. The reducedligature<br />
fittings by <strong>Glutz</strong> protect persons at risk of injury and self harm by reducing the possibility of any<br />
ligature being achieved and at the same time offering a robust and durable solution.<br />
<strong>Glutz</strong> reduced-ligature fittings – offering protection and security.<br />
The reduced-ligature access system solution is characterised by the following features:<br />
• Technologies<br />
RFID Eypos reduced-ligature set with 'Steel Public' plate<br />
Mechanical ES options on request<br />
• Application areas<br />
Forensic and psychiatric clinics<br />
Penal institutions<br />
Police, customs and court buildings<br />
• Installation<br />
Simple and economical<br />
Stand-alone, no network<br />
• RFID media and programming<br />
Badges, cards, Swatch access watches, watch clips, mobile phone clips<br />
Simple programming with card set directly at the door
Control components Door components<br />
Selection of options<br />
Wall reader<br />
type NUP<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation at April 2011<br />
Wall reader<br />
type UP<br />
Programmer<br />
card set 0 - 9<br />
A, B, C<br />
Key-Clip<br />
(Badge)<br />
Whether it is a question of biometric identification or security-tested fittings, locks or hinge plates: <strong>Glutz</strong><br />
offers you a rounded, elegant security programme, satisfying all fire & smoke protection, break-in and<br />
escape route standards – all under one roof.<br />
Key-Tag<br />
For further information on our security products, visit www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
D<br />
D<br />
D<br />
C<br />
C<br />
D<br />
A<br />
Set Eypos<br />
reduced-ligature<br />
Door hinge<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
B<br />
Extra wide striking<br />
plate<br />
C<br />
Heavy duty<br />
mortice lock<br />
anti-friction<br />
and anti-thrust<br />
latch
Day nurseries, pre-school classes, kindergartens –<br />
Security of the children in your care is our business!<br />
When it comes to the well-being and security of their children, parents accept no compromises. Nowadays,<br />
nurseries, pre-school classes and kindergartens are confronted with issues of the security of the children in<br />
their care on an almost daily basis. Their premises must make an attractive and welcoming impression, but at<br />
the same time the highest security must be provided behind the scenes for children and staff alike.<br />
Biometric system solutions by <strong>Glutz</strong> routinely ensure that only authorized persons gain access to your premises,<br />
i.e. teaching staff, children and parents. Fingerprinting enables every desired interior and outside door to<br />
be opened conveniently and unobtrusively.<br />
<strong>Glutz</strong> biometric solutions secure access and guard the doors<br />
Access solutions are typified by the following features:<br />
• Convenient and safe biometric access control<br />
Fingerprints ensure dependable identification of parents, children and teaching staff. No need for<br />
keys, PIN codes or cards.<br />
The teaching timetable can be stored in the system to restrict access to those parents whose children<br />
are attending lessons.<br />
• Easy user administration<br />
New authorizations can be set up in the indoor area easily and quickly using a touch screen terminal<br />
• Straightforward use of the robust outdoor Fingerprint unit which can also be combined with a bell or<br />
light-activated switch.<br />
• The self-closing security lock, <strong>Glutz</strong> HZ lock with emergency opening function and door guard makes<br />
sure that the door always remains closed.<br />
• Door opening times are monitored. If the maximum opening time is exceeded, a siren will be activated.
For biometric identification or security-proven fittings, locks or strips: <strong>Glutz</strong> offers you a comprehensive<br />
and elegant security product range from a single source, compliant with all fire and smoke protection,<br />
break-in and escape route standards.<br />
For further information about our safety products please go to www.glutz.com<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Giesserei<br />
Oschwandstrasse 20, 3475 Riedtwil, Schweiz<br />
Tel. +41 62 968 17 42, Fax +41 62 968 17 82<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> GmbH Predstavništvo<br />
D. Velemerić 33, 47000 Karlovac, Hrvatska<br />
Tel. +385 47 8017 69, Fax +385 47 8017 68<br />
info@glutz.hr, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
Subject to technical changes without notice<br />
Status May 2009
The world of banks – from the garage entry via gate<br />
and lift right to the server room!<br />
Lost keys or cards continue to create unavoidable and high expenses for banks – quite unnecessarily. This is<br />
where the <strong>Glutz</strong> Fingerprint system provides a simple and permanent remedy.<br />
Authorized users gain access in the simplest and most convenient way: by fingerprint or by a combination of<br />
code and fingerprint. Keys and badges are totally dispensed with. All access points can be equipped universally<br />
and in the latest design with the Fingerprint system by <strong>Glutz</strong>: Staff entrance in the external area, office, server<br />
room, personnel gates for access to the strong room, lift control etc. Thanks to its simplicity in use and optimal<br />
security the system enjoys a high degree of acceptance amongst users.<br />
<strong>Glutz</strong> Biometric solutions – keyless access from the entrance to the high security area<br />
The access solutions are characterized by the following features:<br />
• Combined Code + Fingerprint units on every door<br />
eliminating risks from lost keys or badges<br />
• Enhanced security<br />
selectable security levels per access point (Code+Fingerprint, Fingerprint only)<br />
no possibility for loss or passing on to other users (key, badge)<br />
• Universality<br />
<strong>Glutz</strong> Biometry at the door<br />
<strong>Glutz</strong> Biometry integrated in the lift control<br />
<strong>Glutz</strong> Biometry integrated in the gate solution<br />
• Integration<br />
<strong>Glutz</strong> Biometry as a component of a higher-ranking access system for access authorizations<br />
Administration: seamless integration of the <strong>Glutz</strong> Access System into the higher- ranking access control<br />
• Acceptance<br />
high degree of acceptance by staff through simple and convenient operation and good instructions for use
Control components Door components<br />
<strong>Glutz</strong> Access PC Admin<br />
Software<br />
<strong>Glutz</strong> Access Controller<br />
Basic version B01<br />
Selection of options<br />
<strong>Glutz</strong> Access Controller<br />
Extended version E01<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation at November 2009<br />
Code + fingerprint<br />
unit<br />
C<br />
C<br />
C<br />
<strong>Glutz</strong> Access Touch Admin<br />
Standalone<br />
A<br />
RFID unit Lever handle<br />
5064 Oslo<br />
Whether it is a question of biometric identification or security-tested fittings, locks or hinge plates: <strong>Glutz</strong><br />
offers you a rounded, elegant security programme, satisfying all fire & smoke protection, break-in and<br />
escape route standards – all under one roof.<br />
For further information on our security products, visit www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
B<br />
C<br />
C<br />
Window handle<br />
5064 Oslo<br />
A<br />
<strong>Glutz</strong> Eypos ©<br />
HZ-lock<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
B<br />
Cable channel-<br />
HZ-lock<br />
C<br />
HZ-lock
Organisation door self-locking<br />
Important contracts, client data, development results or other sensitive information –the safeguarding of sensitive<br />
data is of foremost importance for every enterprise.<br />
The Fingerprint system from <strong>Glutz</strong> supports you with the protective measures which you have to take. Combined<br />
with self-locking mortice locks and the mechatronic Eypos security-tested builders’ hardware or E-openers,<br />
you obtain optimal protection for your sensitive information. Self-locking locks with optional door closers<br />
plus door monitoring ensure that the door is always locked. Authorized persons enter the rooms without<br />
key or badge quite simply by fingerprint. And should information ever go missing, the situation is cleared up<br />
with the aid of a detailed logfile!<br />
<strong>Glutz</strong> organisation doors – for safely protecting the value creating data of your enterprise!<br />
The access solution via the organisation doors is characterized by the following features:<br />
<strong>Glutz</strong> Access fingerprint system<br />
• Access point<br />
Convenient and quick access with fingerprint and/or code<br />
• High level of security<br />
Person-related access with fingerprint<br />
“Door closed” monitoring is optional<br />
Detailed, person-related logfiles<br />
• Simple administration via PC or touchscreen<br />
• Integration possible into already installed access systems (on request)<br />
<strong>Glutz</strong> lock and security-tested builders’ hardware<br />
• Mortice lock 1240<br />
Self-locking with integrated anti-thrust deadbolt<br />
Can also be used purely mechanically using a lever handle set: outside knob fixed to escutcheon/rose, inside<br />
lever handle fixed movable <strong>Glutz</strong> easyfix on escutcheon/rose<br />
Mechatronic application with the <strong>Glutz</strong> Eypos © public security-tested builders’ hardware (offline): lever<br />
handles inside and outside, so it can also be used as a panic lock
Control components Door components<br />
<strong>Glutz</strong> Access PC Admin<br />
Software<br />
<strong>Glutz</strong> Access Controller<br />
Basic version B01<br />
Choice of options<br />
<strong>Glutz</strong> Access Touch Admin<br />
Standalone<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation as at November 2009<br />
Code + fingerprint<br />
units<br />
D<br />
D<br />
B, D, F<br />
Whether it is a question of biometric identification or security-tested builders’ hardware, locks or hinge<br />
plates: <strong>Glutz</strong> offers you a rounded, elegant security programme, satisfying all fire & smoke protection,<br />
intruder and escape route standards – all under one roof.<br />
A, E<br />
A, E<br />
A, E<br />
For further information on our security products, visit www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
C<br />
Door hinges<br />
A<br />
B<br />
<strong>Glutz</strong> Eypos ©<br />
E<br />
Locating element<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
C<br />
Cable channel<br />
F<br />
Striking plate<br />
round<br />
B-1102-431<br />
D<br />
Heavy duty<br />
mortice lock<br />
1240<br />
selflocking
Residential building outside door, full leaf<br />
Carrying keys is unpopular with the sporting fraternity and undesirable for children – even within our own<br />
four walls we want to be able to move around safely, comfortably, simply and without the worry of high replacement<br />
costs in the case of loss. The latest fingerprint systems such as the <strong>Glutz</strong> combined security-tested<br />
locks and builders’ hardware satisfy all these needs. Leaving keys with third parties is finally laid to rest!<br />
<strong>Glutz</strong> Access solutions combine security, convenience, design and functionality at a very high level. Convenient<br />
and safe key-free access is guaranteed through high quality fingerprint readers. The combination with code<br />
keypads additionally permits the control of alarm systems or the temporary access of persons not biometrically<br />
recorded (TimeCode: time-limited access, e.g. for tradesmen). For the mechanical security <strong>Glutz</strong> supply<br />
multipoint locks, door hinges and builders’ hardware whose elegant design emphasizes the character of any<br />
building.<br />
<strong>Glutz</strong> residential building outside door – feel safe within your own four walls!<br />
The access solutions for the residential building outside door are characterized by the following features:<br />
• Convenient key-less access with fingerprint, code or combined code with fingerprint<br />
• High level of security<br />
Security-tested locks and builders’ hardware<br />
Access with fingerprint and/or code<br />
Programmable access authorizations (TimeCode: time-limited access, e.g for tradesmen)<br />
• Extremely simple operating of access, alarm system, house control system (e.g. KNX)<br />
Integrated linking with alarm system for user-friendly operating<br />
-fine/coarse setting for alarm system<br />
-display of alarm system status<br />
-door monitoring<br />
Linking with house control systems<br />
-activation of scenes by means of fingerprint or code (e.g. lighting control)<br />
-combined use of the touch PC for user administration and house control<br />
Customer-specific functions possible<br />
• High quality design
Control components Door components<br />
<strong>Glutz</strong> Access PC Admin<br />
Software<br />
<strong>Glutz</strong> Access Controller<br />
Basic version B01<br />
Choice of options<br />
<strong>Glutz</strong> Access Touch<br />
Admin Standalone<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation at November 2009<br />
Lever handle 5064<br />
Oslo<br />
Code + fingerprint<br />
units<br />
D<br />
C<br />
D<br />
Lever handle 5071<br />
Memphis<br />
B, D<br />
Lever handle 5087<br />
INOX Basel<br />
Whether it is a question of biometric identification or security-tested builders’ hardware, locks or hinge<br />
plates: <strong>Glutz</strong> offers you a rounded, elegant security programme, satisfying all fire & smoke protection,<br />
break-in and escape route standards – all under one roof.<br />
A, E<br />
A, E<br />
A, E<br />
For further information on our security products, visit www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
Door hinge<br />
A<br />
B<br />
<strong>Glutz</strong> Eypos ©<br />
private<br />
E<br />
Locating element<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
C<br />
Long striking<br />
plate Treplane<br />
D<br />
Treplane<br />
1839
Flush-fitting roses and plates are truly pleasing to<br />
the eye!<br />
The dream of one’s own four walls – who doesn’t have it? Once the piggy bank is full, the plot has been bought<br />
and the architect instructed, it’s time to make difficult choices. A lot of effort goes into choosing the style of the<br />
building, the service installations, the kitchen, bathroom, floors, paint finishes as well as doors and windows.<br />
And this is probably the first time that one realises that the selected building style can be perfectly rounded off<br />
with something as mundane as door and window hardware.<br />
The new flush-fitting plates and roses by <strong>Glutz</strong> represent a sophisticated extension of the existing range.<br />
Whether round or square, for doors or for windows, these elegant fittings merge seamlessly with the door leaf<br />
and can be combined with all <strong>Glutz</strong> door levers and bearing options. Really clever, our new beauties – and that,<br />
with the customary Swiss quality!<br />
Flush-fitted roses by <strong>Glutz</strong> are also a delight to look at!<br />
Features of the flush-fitted roses and plates:<br />
• Can be fitted with the whole range of bearing options and with all door thicknesses<br />
Recessed, semi-recessed or surface mounted<br />
<strong>Glutz</strong> easyfix glide bearing tested for 1 million cycles<br />
Other bearing options: Needle bearing, Twin<br />
• Many options available<br />
Roses round or square<br />
Security roses, round or square<br />
Long and short plates<br />
• Looks and advantages of flush installation<br />
Elegance of flush-fitting hardware<br />
Easy cleaning and hence improved hygiene<br />
• Installation<br />
A drilling and routing template make installation on site easy.
Control components Door components<br />
Choice of options<br />
Flush mounted stainless<br />
steel lever rose<br />
51010<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation at April 2011<br />
Flush mounted stainless<br />
steel escutcheon<br />
51011<br />
C, D, E<br />
Flush mounted stainless<br />
steel lever rose<br />
51012<br />
Flush mounted stainless<br />
steel escutcheon<br />
51013<br />
Whether it is a question of biometric identification or security-tested builders’ hardware, locks or hinge<br />
plates: <strong>Glutz</strong> offers you a rounded, elegant security programme, satisfying all fire & smoke protection,<br />
break-in and escape route standards – all under one roof.<br />
A, B<br />
A, B<br />
A, B<br />
For further information on our security products, visit www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
Door hinge<br />
A<br />
B<br />
Locating element<br />
Flush roses<br />
Lever handle 5038<br />
Lugano<br />
C<br />
Lever handle 5052<br />
Biel<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
D<br />
Strike plate to<br />
mortice<br />
E<br />
Heavy duty<br />
mortice lock
Offshore door solutions defy wind and weather -<br />
drilling platforms, drilling ships, industrial tankers<br />
The slowly diminishing stocks of natural resources, in particular oil and gas are enforcing the expansion<br />
of ocean exploration activities. Also in the sphere of research of the earth’s crust as well as its tectonics,<br />
the exploration of the sea floor is of increasing importance as it enables the forecasting and analyses of<br />
earthquakes. The ability to explore and transport raw materials at an average depth of 4 000 to 5 000 metres<br />
demands an outlay on technical resources equal to that for the scientific research of the sea floor.<br />
Offshore platforms are permanently exposed to enormously severe weather conditions: wind, rain, sun, salt<br />
water, twister. <strong>Glutz</strong> door components withstand these natural forces – day after day, throughout the years.<br />
<strong>Glutz</strong> Offshore solutions – not for sensitives!<br />
Offshore door solutions are characterised by the following features:<br />
• Facts<br />
complete door unit tested according to the relevant standards by the marine door manufacturer<br />
developed and constantly optimised together with customers<br />
year long solution for rigorous everyday conditions: robust, maintenance free and dependable<br />
• Stainless steel lever handle 5064 Offshore<br />
special threaded lever guide for fixed bearing<br />
8 or 9 mm spindle execution, radius 80 or 66 mm<br />
• Stainless steel backplate 7151 / 7150 Offshore<br />
long life and extra narrow adapted special ceramic bearing, high load carrying capacity and fixed<br />
resistant to the most commonly used chemicals<br />
spindle dimensions 35 mm (7151) and 22 mm (7150)<br />
• Stainless steel panic bar 8610 Offshore<br />
door plates 70 mm wide, follower 9 mm (where required, also 8 mm)<br />
Spring force adjusting mechanism for adapting the two panic levers<br />
Accessories: Panic spindle 5920, 9 x 110 mm (or 170 mm)
Control components Door components<br />
Further areas of application, for which robust everyday products are required all over the door<br />
• Freighters, industrial tankers, cruisers<br />
• Buildings in and around port installations<br />
• Nuclear power stations<br />
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 35<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Access Center<br />
Hertistrasse 31, 8304 Wallisellen, Schweiz<br />
Tel. +41 44 496 12 11, Fax +41 44 496 12 12<br />
info@glutz.com, www.glutz.com<br />
<strong>Glutz</strong> AG, Fertigung Gossau<br />
Wilerstrasse 73, 9200 Gossau, Schweiz<br />
Tel. +41 71 388 70 90, Fax +41 71 388 77 99<br />
info@glutz.com, www.glutz.com<br />
Subject to technical changes<br />
Situation at April 2010<br />
A<br />
• Military vessels<br />
• <strong>Industrial</strong> buildings<br />
• Mining operations<br />
Whether it is a question of biometric identification or security-tested builders’ hardware, locks or hinge<br />
plates: <strong>Glutz</strong> offers you a rounded, elegant security programme, satisfying all fire & smoke protection,<br />
break-in and escape route standards – all under one roof.<br />
For further information on our security products, visit www.glutz.com<br />
<strong>Glutz</strong> Deutschland GmbH<br />
Hertzstrasse 13, 30827 Garbsen, Deutschland<br />
Tel. +49 5131 95 138, Fax +49 5131 96 689<br />
info@glutz.de, www.glutz.com<br />
<strong>Glutz</strong> GmbH, Österreich<br />
St. Oswalder Strasse 5c, 4293 Gutau, Österreich<br />
Tel. +43 7946 20506, Fax +43 7946 20506 10<br />
info@glutz.at, www.glutz.com<br />
<strong>Glutz</strong> UK Ltd.<br />
11 Finch Drive, Springwood <strong>Industrial</strong> Estate<br />
Braintree CM7 2SF, United Kingdom<br />
Tel. +44 1376 348 808, Fax +44 1376 348 848<br />
info@glutz.co.uk, www.glutz.com<br />
Offshore 8610 Panic bar, 300 x 70 x 4 mm<br />
Offshore 5064 Backplate with lever handle<br />
Panic spindle 5920<br />
References Marine door manufacturers supplied with <strong>Glutz</strong> marine products<br />
• Malampaya drilling platform, Chinese sea<br />
• Burntisland shipyard, Scotland<br />
• Elf Congo drilling platform, Africa<br />
• Norac Baggeroed, Norway<br />
• Rapp Bomek, Norway<br />
• Halliburton Hevy duty industry, USA<br />
<strong>Glutz</strong> Singapore Pte Ltd.<br />
50 Tagore Lane, #02-04, Entrepreneur Centre<br />
Singapore 787 494<br />
Tel. +65 6 55 44 111, Fax +65 6 55 44 610<br />
info@glutz.com.sg, www.glutz.com<br />
A<br />
A<br />
A
General Conditions of Contract and Supply<br />
<strong>Glutz</strong> Ltd., 4502 Solothurn, Switzerland<br />
1. General<br />
1.1 These general conditions of supply<br />
and performances shall be binding<br />
on all supplies of <strong>Glutz</strong>. Any conditions<br />
stipulated by the customer which are in<br />
contradiction to these general conditions<br />
of supply shall only be valid if expressly<br />
acknowledged by <strong>Glutz</strong> in writing. Offers<br />
of <strong>Glutz</strong> which do not stipulate an<br />
acceptance period shall not be binding.<br />
1.2 All agreements and legally relevant<br />
declarations of the parties to the contract<br />
must be in writing in order to be valid.<br />
1.3 Orders shall be deemed to have been<br />
accepted, provided all relevant technical<br />
and commercial details have been settled,<br />
upon receipt of <strong>Glutz</strong>‘s written order<br />
acknowledgement or the execution of the<br />
supplies of <strong>Glutz</strong>.<br />
2. Scope of Supplies and Services<br />
2.1 The supplies and services of <strong>Glutz</strong><br />
shall be executed either in accordance<br />
with customer‘s order or in accordance<br />
with the order confirmation of <strong>Glutz</strong>.<br />
2.2 Supplies exceeding order values<br />
of CHF 5‘000.-- are inclusive freight<br />
charges for normal freight delivery. <strong>Glutz</strong><br />
shall have the right to decide the way of<br />
despatch according to the nature of the<br />
supplies. The freight charges and postage<br />
for each express parcel or express letter<br />
and any direct despatch of goods shall be<br />
separately invoiced. <strong>Glutz</strong> reserves the<br />
right to charge part of the freight costs<br />
for bulky material exceeding a length of 2<br />
meters.<br />
2.3 For small orders up to CHF 100.--<br />
a fee of CHF 20.-- shall be charged with<br />
each order.<br />
2.4 Packing shall be charged at actual, i.e.<br />
for each cardboard box CHF 2.50 shall be<br />
invoiced. Payment for cases shall be deferred<br />
provided they are returned within<br />
4 weeks carriage paid and in proper condition.<br />
Special packing requested by customers<br />
shall be charged separately.<br />
2.5 The return of delivery requires the<br />
explicit consent of <strong>Glutz</strong>. A handling fee<br />
of 50% of the order value shall be charged.<br />
Any repair work shall be charged at actual<br />
costs. Products made after individual<br />
dimensions, customer drawings or tailor<br />
made products may not be taken back at<br />
any time.<br />
3. Plans and Technical documents<br />
3.1 Unless otherwise agreed upon,<br />
brochures and catalogues are not binding.<br />
Data provided for in technical documents<br />
are only binding in so far as having been<br />
expressly stipulated as such in writing.<br />
3.2 <strong>Glutz</strong> retains all rights to technical<br />
documents. The customer recognises these<br />
rights and will not make these documents<br />
available to any third party, either<br />
in whole or in part - without the previous<br />
written consent of <strong>Glutz</strong>.<br />
4. Prices<br />
4.1 Unless mentioned otherwise in the<br />
offers or order confirmations of <strong>Glutz</strong>,<br />
all prices shall be deemed to be net, excluding<br />
Swiss VAT, if any, ex works (IN-<br />
COTERMS 2010), excluding packing,<br />
without any deduction whatsoever.<br />
4.2 <strong>Glutz</strong> reserves the right to adjust the<br />
prices in case the delivery time has been<br />
subsequently extended due to any reason<br />
stated in Clause 6.2, or any documents<br />
furnished by the customer were not in<br />
conformity with the actual circumstances,<br />
or were incomplete.<br />
5. Terms of payment<br />
5.1 Unless agreed otherwise in the offers<br />
or order confirmations of <strong>Glutz</strong>, payments<br />
shall be effected within 30 days<br />
from the date of invoice.<br />
5.2 Payments shall be made at <strong>Glutz</strong>‘s<br />
domicile, without any deduction for cash<br />
discount, expenses, taxes, levies, fees, duties,<br />
and the like.<br />
5.2 If the customer delays in the agreed<br />
terms of payment, it shall be liable,<br />
without reminder, for interest with effect<br />
from the agreed date on which the payment<br />
was due at a rate of 4 per cent over<br />
the current discount rate of the Swiss National<br />
Bank. The right to claim further damages<br />
is reserved.<br />
6. Delivery time<br />
6.1 The delivery time shall start as soon<br />
as the contract is entered into, all official<br />
formalities have been completed, payments<br />
due with the order have been made,<br />
and any agreed securities given and the<br />
main technical points settled. The delivery<br />
time shall be deemed to be observed if<br />
by that time <strong>Glutz</strong> has sent a notice to the<br />
customer informing that the supplies are<br />
ready for dispatch.<br />
6.2 The delivery time is reasonably extended:<br />
a) if the information required by <strong>Glutz</strong><br />
<strong>Glutz</strong> Ltd., Segetzstrasse 13, 4502 Solothurn, Switzerland<br />
Phone +41 32 625 65 20, Fax +41 32 625 65 35, info@glutz.com, www.glutz.com<br />
for performance of the contract is not received<br />
in time, or if the customer subsequently<br />
changes it thereby causing a delay<br />
in the delivery of the supplies or services;<br />
b) if hindrances occur which <strong>Glutz</strong> cannot<br />
prevent despite using the required<br />
care, regardless of whether they affect<br />
<strong>Glutz</strong> or the customer or a third party.<br />
Such hindrances include, but shall not<br />
be limited to, epidemics, mobilisation,<br />
war, revolution, serious breakdown in the<br />
works, accidents, labour conflicts, late or<br />
deficient delivery by subcontractors of<br />
raw materials, semi-finished or finished<br />
products, the need to scrap important<br />
work pieces, official actions or omissions<br />
by any state authorities or public bodies,<br />
natural catastrophes, acts of God;<br />
c) if the customer or a third party is behind<br />
schedule with work it has to execute, or<br />
with the performance of its contractual<br />
obligations, in particular if the customer<br />
fails to observe the terms of payment.<br />
6.3 If the despatch of the supplies must<br />
be delayed by request of the customer,<br />
<strong>Glutz</strong> shall have the right to charge storing<br />
fees starting one month from the date<br />
of despatch of the written notification<br />
that the supplies are ready for despatch.<br />
The storing fee shall be 1% of the value of<br />
the supplies stored for each full month or<br />
part thereof. The right to claim further damages<br />
is reserved.<br />
6.4 Any delay of the supplies or services<br />
does not entitle the customer to any rights<br />
and claims other than those expressly stipulated<br />
in this Clause 6. This limitation<br />
does, however, not apply to unlawful<br />
intent or gross negligence on the part of<br />
<strong>Glutz</strong>, but does apply to unlawful intent<br />
or gross negligence of persons employed<br />
or appointed by <strong>Glutz</strong> to perform any of<br />
its obligations.<br />
7. Passing of benefit and risk<br />
7.1 The benefit and the risk of the supplies<br />
shall pass to the customer according<br />
to the INCOTERMS 2010.<br />
7.2 If dispatch is delayed at the request<br />
of the customer or due to reasons beyond<br />
<strong>Glutz</strong>‘s control, the risk of the supplies<br />
shall pass to the customer at the time<br />
originally foreseen for delivery ex works.<br />
From this moment on, the supplies shall<br />
be stored and insured on the account and<br />
at the risk of the customer.
8. Inspection and acceptance of the<br />
supplies / services<br />
8.1 As far as being normal practice,<br />
<strong>Glutz</strong> shall inspect the supplies and services<br />
before dispatch. If the customer<br />
requests further testing, this has to be<br />
specially agreed upon and paid for by the<br />
customer.<br />
8.2 The customer shall inspect the supplies<br />
and services within 5 days from the<br />
date of receipt and shall immediately notify<br />
<strong>Glutz</strong> If the customer fails in doing<br />
so, the supplies and services shall be deemed<br />
to have been accepted.<br />
8.3 Having been notified of the deficiencies<br />
according to Clause 8.2, <strong>Glutz</strong> shall<br />
as soon as possible remedy them, and the<br />
customer shall give <strong>Glutz</strong> the possibility<br />
of doing so.<br />
8.4 The performance of an acceptance test<br />
as well as laying down the conditions related<br />
thereto requires an individual agreement.<br />
9. Erection<br />
If <strong>Glutz</strong> undertakes the erection or the<br />
supervision of the erection, the General<br />
Conditions of Erection of <strong>Glutz</strong> shall apply.<br />
10. Reservation of title<br />
10.1 <strong>Glutz</strong> shall remain the owner of all<br />
supplies until having received the full<br />
payments in accordance with the contract.<br />
The customer authorises <strong>Glutz</strong> upon conclusion<br />
of the contract and if so provided<br />
in the contract or if the customer faces<br />
problems in fulfilling the payment terms,<br />
to enter or notify the reservation of title in<br />
the required form in public registers and<br />
to fulfil all corresponding formalities.<br />
10.2 During the period of the reservation<br />
of title, the customer shall, at its own cost,<br />
maintain the supplies and insure them for<br />
the benefit of <strong>Glutz</strong> against theft, breakdown,<br />
fire, water and other risks. It shall<br />
further take all measures to ensure that<br />
the <strong>Glutz</strong>‘s title is in no way prejudiced.<br />
11. Guarantee, liability for defects<br />
11.1 The guarantee period is 24 months.<br />
It starts when the supplies leave the<br />
works. If dispatch is delayed due to reasons<br />
beyond <strong>Glutz</strong>‘s control, the guarantee<br />
period shall end not later than 30<br />
months after <strong>Glutz</strong>‘s notification that the<br />
supplies are ready for dispatch.<br />
11.2 For replaced or repaired parts the<br />
guarantee period starts anew and lasts 6<br />
months after replacement or completion<br />
of the repair, but not longer than the expiry<br />
of a period being double to the gua-<br />
rantee period stipulated in the preceding<br />
paragraph.<br />
11.3 Excluded from <strong>Glutz</strong>‘s guarantee<br />
and liability for defects are all deficiencies<br />
which cannot be proved to have their origin<br />
in bad material, faulty design or poor<br />
workmanship, e.g. those resulting from<br />
normal wear, improper maintenance,<br />
failure to observe the operating instructions,<br />
excessive loading, use of any unsuitable<br />
material, influence of chemical or<br />
electrolytic action, changes, replacements<br />
or additions and services by third parties<br />
which do not comply with the quality<br />
specifications of <strong>Glutz</strong>, or erection work<br />
not undertaken according to the erection<br />
instructions of <strong>Glutz</strong>, or resulting from<br />
other reasons beyond <strong>Glutz</strong>‘s control.<br />
11.4 The guarantee expires prematurely if<br />
the customer or a third party undertakes<br />
inappropriate modifications or repairs or<br />
if the customer, in case of a defect, does<br />
not immediately take all appropriate steps<br />
to mitigate the damage and give <strong>Glutz</strong> the<br />
possibility of remedying such defect.<br />
11.5 Upon written request of the customer,<br />
<strong>Glutz</strong> undertakes at its choice to repair<br />
or replace as quickly as possible any<br />
parts of the supplies which, before the<br />
expiry of the guarantee period, are proved<br />
to be defective due to bad material, faulty<br />
design or poor workmanship. Replaced<br />
parts shall become <strong>Glutz</strong>‘s property.<br />
11.6 Express guarantees are only those<br />
which have been expressly specified as<br />
such in the order acknowledgment or in<br />
the specifications. An express guarantee<br />
is valid until the expiry of the guarantee<br />
period at the latest.<br />
12. Exclusion of further liability on<br />
<strong>Glutz</strong>‘s part<br />
All cases of breach of contract and the relevant<br />
consequences as well as all rights<br />
and claims on the part of the customer, irrespective<br />
on what ground they are based,<br />
are exhaustively covered by these general<br />
conditions of supply. In particular, any<br />
claims not expressly mentioned for damages,<br />
reduction of price, termination of<br />
or withdrawal from the contract are excluded.<br />
In no case whatsoever shall the customer<br />
be entitled to claim damages other<br />
than compensation for costs of remedying<br />
defects in the supplies. This in particular<br />
refers, but shall not be limited, to loss of<br />
production, loss of use, loss of orders, loss<br />
of profit and other direct or indirect or<br />
consequential damage. This exclusion of<br />
liability, however, does not apply to unlawful<br />
intent or gross negligence on the<br />
part of <strong>Glutz</strong>, but does apply to unlawful<br />
<strong>Glutz</strong> Ltd., Segetzstrasse 13, 4502 Solothurn, Switzerland<br />
Phone +41 32 625 65 20, Fax +41 32 625 65 35, info@glutz.com, www.glutz.com<br />
intent or gross negligence of persons employed<br />
or appointed by GLTUZ to perform<br />
any of its obligations.<br />
This exclusion of liability does not apply<br />
as far as it is contrary to compulsory law.<br />
13. Jurisdiction and applicable law<br />
The place of jurisdiction for both the ordering<br />
party and <strong>Glutz</strong> is the head office<br />
of <strong>Glutz</strong> AG, Solothurn. <strong>Glutz</strong> is however<br />
authorised to take legal action at the place<br />
of the ordering party.<br />
National sales contracts (CH) are subject<br />
to the material Swiss law under exclusion<br />
of the Vienna sales convention (CISG) of<br />
April 18, 1980.<br />
Inetrnational sales contracts are subject<br />
to the Vienna sales convention (CISG) of<br />
April 18, 1980, liability for missed profit<br />
and further damage, however, is excluded.<br />
11/2011
Territorial allocation<br />
Scandinavia<br />
Norway<br />
Hole Lås AS<br />
Rogaland<br />
Hordaland (m. Bergen)<br />
Song og Fjordane<br />
Møre og Romsdal<br />
Troms<br />
Boyesen & Munthe AS<br />
Vest Agder<br />
Aust Agder<br />
Telemark<br />
Vestfold<br />
Buskerud<br />
Østfold<br />
Oslo<br />
Oppland<br />
Hedemark<br />
Sør Trøndelag<br />
Nord Trøndelag<br />
Nordland<br />
Finnmark<br />
Iceland<br />
Vélar & Verkfæri
<strong>Glutz</strong> AG<br />
Segetzstrasse 13, 4502 Solothurn, Schweiz<br />
Tel. +41 32 625 65 20, Fax +41 32 625 65 48<br />
glutz@glutz.com, www.glutz.com<br />
Hjortnæs Beslag, Door- & Windows hardware<br />
<strong>Scandinavian</strong> agent for <strong>Glutz</strong> Ltd.<br />
Fregattveien 7A, 3150 Tolvsrød, Norge<br />
Tel: +47 33 32 54 48, Fax: +47 33 32 59 10<br />
hjortnaes.beslag@online.no, www.glutz.com<br />
Boyesen & Munthe AS<br />
Distributor Norway<br />
Tvetenveien 152, 0671 Oslo, Norge<br />
Tel: +47 23 34 70 00, Fax: +47 23 34 70 19<br />
www.boyesen-munthe.no<br />
Hole Lås AS<br />
Distributor Norway<br />
Midtunlia 73, 5224 Nesttun, Norge<br />
Tel: +47 55 92 20 80, Fax: +47 55 92 20 99<br />
raymond@holelas.no, www.holelas.no<br />
2011<br />
Vélar & Verkfæri<br />
Distributor Iceland<br />
Skútuvogur 1 c, IS-104 Reykjavík, Iceland<br />
Tel: +354 550 8500, Fax: +354 550 8510<br />
bjorn@vv.is, www.vv.is