Product book (PDF) - Glutz

Product book eAccess 2012 

Technical specifications are subject to change without notice

2 

Product overview 

1. eAccess 

1.1 E protection fittings private 

80125 Private - steel 

p. 5 

1.2 E anti-suicide fitting 

80410 Public 

p. 8 

80140 Private - ES1 

p. 6 

1.3 E protection fittings public 

80225 Public - steel 

p. 9 

80240 Public - ES1 

p. 10 


p. 7 


p. 11

1.4 E protection fitting HZ lock 

80430 Public - ES3 - 

HZ-Lock 

p. 12 

1.5 E organisation fittings 

public narrow 

80550 Public narrow 

- steel - with interior 

plate 

p. 13 

1.6 E organisation fittings public wide 

80510 Public wide - 

Steel with inside 

plate 

p. 16 


- steel - with inside 

roses 

rectangular 

p. 14 


steel - with inside 

roses rectangular 

p. 17 


- steel - without 

interior fittings 

p. 15 


steel - with inside 

roses round 

p. 18 


steel - without interior 

fittings 

p. 19 

3

4 

1.7 E reader internal zone 

82220 Surface 

mounting for indoor 

zone 

p. 20 

1.8 E reader exterior zone 

82410 Outdoor surface 

mounted 

p. 26 

1.9 Media 

11111 Card Set 1 

p. 30 

82221 Surface 


zone 

p. 21 

82411 Recessed 

mounting for outdoor 

use 

p. 27 

33333 Card Set 1 

p. 30 

1.10 Indications to order 



use 

p. 22 

82420 Outdoor surface 

mounted 

p. 28 

82211 Surface 


zone 

p. 23 


mounting for outdoor 

use 

p. 29 

82210 Surface 


zone 

p. 24 



use 

p. 25

1.1 E protection fittings private E protection fitting 

80125 Private - steel 

Product profile 

For interior and exterior full panel doors in 

private and public areas. Opening and closure 

from the outside by contactless reading of the 

medium such as a key pendant or chip card. 

Inside the door is opened or closed by actuating 

the electronic sensor integrated in the fitting. 

Emergency mechanical opening from 

the inside. 

Standard version 

• DIN left and right with changeover facility 

• Identification via RFID Mifare 

and radio 868 MHZ 

• Outside handle coupled, handle blocked 

• Flat external plate satin stainless steel 

• Surface mounted 250 x 55 x 3 mm 

• Security rose RZ/PZ 

• Interior plate satin stainless steel 

• Base plate in steel with screwed on 

electronic board and locking mechanism, 

with battery retainer 


• Guide 16 mm glide, easyfix ® 

• Important 

Outside with knob pin section, inside with 

perforated section 8, 8.5 or 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 

• Lever handle designs: 5057, 5062, 5064, 

5066, 5071, 5087, 5098 

• Pins: 8 mm, 8.5 mm, 9 mm 

• Polished stainless steel 

• Stainless steel satin brass look 

• Stainless steel polished brass look 

• Remoteboard 12 - 24 VDC (RS 485) 

• Matching screws and pins for 

door thicknesses: 34 - 113 mm 

• Cylinder protection roses for cylinder 

projection 4 - 23 mm RZ/PZ 

*See Order key 

Technical specifications are subject to change without notice 


28...107 

3 14 

8 6 

3 

1839 

Treplane multipoint 

locking device for E fittings 

p.49 

1107 

Heavy duty mortice lock 

p.49 

250 

95 

79 

139 

Entfernung 

64 

21.5 

55 

1235 

1240 

Heavy duty mortice lock Heavy duty mortice lock, 

p.49 

panic function E 

p.49 

4x 

13 

18957 

MINT multiple locking 

for E fittings 

p.49 

5











the inside. 






• External plate satin stainless steel 


• Cylinder protection rosette RZ/PZ 







• Important 



Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


5066, 5071, 5087, 5098 

• Pins: 8 mm, 8.5 mm, 9 mm 








projection 4 - 23 mm for RZ 

• Cylinder cover for 

cylinder projection 9 - 16 mm for PZ 


Quality standard 

Tested to DIN 18257-ES1-L (2003-03) 

EN 1906 resistance class 2 (2002-05) 

For burglar resistant doors according to ENV 

1627 - 1630 WK 1+2 (1999-01) 

79 

139 


1839 



p.49 

21.5 

28...107 

12 14 

Ø12 

6 Technical specifications are subject to change without notice 

12 

1107 


p.49 

250 

95 

139 

79 

Entfernung 

64 

21.5 

55 

1235 

1240 


p.49 


p.49 

4x 

13 

ES 1 

18957 



p.49











the inside. 








• Cylinder cover 9-16 mm 







• Important 



Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


5066, 5071, 5087, 5098 

• Pins: 8 mm, 8.5 mm, 9 mm 







• Cylinder cover for 

cylinder projection 9 - 16 mm for RZ/PZ 

*see Order key 


Tested to DIN 18257-ES1-L-ZA (2003-03) 


For burglar resistant doors according to 

ENV 1627 - 1630 WK 4 (1999-01) 



79 

139 

21.5 

12 

1839 



p.49 

28...107 

Ø12 

Ø12 

14 

1107 


p.49 

250 

95 

139 

79 

Entfernung 

64 

21.5 

55 

1235 

1240 


p.49 


p.49 

4x 

13 

ES 3 

18957 



p.49 

7

1.2 E anti-suicide fitting E anti-suicide fitting 

80410 Public 


Personal zones which are safety-critical are 

encountered mainly in forensic and 

psychiatric clinics. Detention establishments, 

police customs and court buildings. Those 

premises require maximum safety to protect 

patients and criminals. The special fitting 

design provides no surfaces which might be 

gripped for strangulation. 

All other functions identical to public E fittings. 















• Important 

Lever handles with split spindle (2 x female 

parts), outside lever handle with guide 8, 

8.5 or 9 mm, inside lever handle always 

with guide 9 mm. 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 

• Lever handle design: 6051 

• Pins: 8 mm, 8.5 mm, 9 mm 






79 

139 


1839 



p.49 

28...107 

12 14 

21.5 


12 

12 

1107 


p.49 

18957 



p.49 

250 

95 

139 

79 

Entfernung 64 

21.5 

55 

45° 

4x 

13

1.3 E protection fittings public E protection fitting 

80225 Public - steel 


For indoor and outdoor solid panel doors in 

the private and public sector. Opening and 

closure from the outside by contactless reading 

of the medium such as a key pendant or 

chip card. The standard solution ensures automatic 

door closure after every access - the 

time gap between access and automatic door 

closure can be programmed individually. The 

door can be opened at any time with the inside 

lever handle (panic function). 






• Flat external plate satin stainless steel 


• Security rose RZ/PZ 







• Important 





Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


5066, 5071, 5087, 5098 

• Pins: 8 mm, 8.5 mm, 9 mm 






door thicknesses: 34 mm - 113 mm 


projection 4 mm - 23 mm RZ/PZ 




28...107 

3 14 

8 6 

3 

1839 



p.49 

1107 


p.49 

250 

95 

79 

139 

Entfernung 

64 

21.5 

55 

1235 

1240 


p.49 


p.49 

4x 

13 

18957 



p.49 

9




























• Important 





Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


5066, 5071, 5087, 5098 

• Pins: 8 mm, 8.5 mm, 9 mm 







• Cylinder protection roses for 

cylinder projection 4 - 23 mm for RZ 

• Cylinder cover for cylinder projection 

9 - 16 mm for PZ 



Tested to DIN 18257-ES1-L (2003-03) 


For burglar resistant doors according to ENV 

1627 - 1630 WK 1+2 (1999-01) 

79 

139 


1839 



p.49 

21.5 

28...107 

12 14 

Ø12 


12 

1107 


p.49 

250 

95 

139 

79 

Entfernung 

64 

21.5 

55 

1235 

1240 


p.49 


p.49 

4x 

13 

ES 1 

18957 



p.49




























• Important 





Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


5066, 5071, 5087, 5098 

• Pins: 8 mm, 8.5 mm, 9 mm 







• Cylinder cover for cylinder projection 

9 - 16 mm for RZ/PZ 

*see Order key 





ENV 1627 - 1630 WK 4 (1999-01) 



79 

139 

21.5 

12 

1839 



p.49 

28...107 

Ø12 

Ø12 

14 

1107 


p.49 

250 

95 

139 

79 

Entfernung 

64 

21.5 

55 

1235 

1240 


p.49 


p.49 

4x 

13 

ES 3 

18957 



p.49 

11

1.4 E protection fitting HZ lock E protection fitting 

80430 Public - ES3 - HZ-Lock 


E protection fitting for multi-functional 

safety door lock HZ lock. For interior and exterior 

solid panel doors in private and public 

zones. Opening and closure from the outside 

by contactless reading of the medium such as 

a key pendant or chip card. The standard solution 

provides automatic door closure after 

each access - the time lag between access and 

automatic door closure can be individually 

programmed. The door can be opened at any 

time via the interior knob (panic function). 





• Outside handle coupled, free-running 







with remoteboard 12 - 24 VDC (RS 485) 


• Guide 16 mm twin glide, easyfix ® 

• Important 

knob with divided pin (2 x perforated 

sections), external and internal 9 mm 

Cutout 

• Blind 

• RZ: 74 mm 

• PZ: 72 mm 

Options 

• Lever handle designs: 6052, 

5064, 5066, 5098 

• Pin: 9 mm 






• Cylinder cover 9 - 16 mm 





ENV 1627 - 1630 WK 4 (1999-01) 

139 79 


Multifunctional security 

locking system 

p.49 

21.5 


28...107 

12 14 

Ø12 

Ø12 

250 

95 

139 

79 

Entfernung 

64 

21.5 

55 

4x 

ES 3 

13


public narrow 


Organising fitting for tubular frame interior 

doors in office and public zones. Opening and 


of the medium such as a key pendant chip 

card. The standard solution provides automatic 

door closure after each access - the time lag 

from access to automatic door closure can be 

programmed individually. Door opening is 

ensured at any time via the inside knob (panic 

function). 





• Outside knob coupled, free-running 



• Steel base place outside with bolted 

electronic board and locking mechanism 

with battery holder 

• Inside plate (6108) stainless steel mat 

• surface mounted 250 x 35 x 8 mm 


• Important 


parts), inside lever handle with guide 8, 8.5 

or 9 mm, outside lever handle always with 

guide 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 

• Lever handle designs: 53001 (5071), 53002 

(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

53003 (5059), 53012 (5072), 5087 

• Pins: 8 mm, 8.5 mm, 9 mm 

• Metal frame door knob designs: 

5841, 5844 (9 mm only) 





• Matching screws and pins 

for door thicknesses: 34 - 113 mm 


E organisation fitting 

80550 Public narrow - steel - with interior plate 


34...114 

22 8 

6 

7.5 6.8 

19 

277 

95 

79 

139 

Entfernung 

21.5 

38 

10 

10 

8 

13


public narrow 











function). 











• Inside roses (6142C/6154C) 

satin stainless steel 

• Surface mounted 72 x 32.5 x 14 mm 


• Important 




guide 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

53003 (5059), 53012 (5072), 5087 

• Pins: 8 mm, 8.5 mm, 9 mm 


5841, 5844 (9 mm only) 








80560 Public narrow - steel - with inside roses rectangular 


34...114 

22 14 

6 

Ø19 


72 

277 

118 95 

82 

Entfernung 

38 

20 

20


public narrow 











function). 












• Important 

Lever handle always 

with female part 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

53003 (5059), 53012 (5072), 5087 



5841, 5844 (9 mm only) 








80570 Public narrow - steel - without interior fittings 


22 

6 

19 

277 

95 

118 82 

Entfernung 

38 

20 

20 

15

1.6 E organisation fittings public 

wide 


Organisation fitting for solid panel interior 

doors for office and public zones. Opening 

and closure from the outside by contactless 

reading of the medium such as a key pendant 

chip card. The standard solution provides automatic 

door closure after each access - the 

time lag from access to automatic door closure 

can be individually programmed. The 

door can be opened at any time via the inside 

knob (panic function). 











• Inside plate (52105) 




• Important 




guide 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

5087 

• Pins: 8 mm, 8.5 mm, 9 mm 


5841, 5844 (9 mm only) 








80510 Public wide - Steel with inside plate 


22 

34...114 

6 

Ø7.5 Ø6.8 

19 


8 

1107 

1235 

1240 

Heavy duty mortice lock Heavy duty mortice lock Heavy duty mortice lock, 

p.49 

p.49 


p.49 

250 

277 

95 

79 

139 

Entfernung 

21.5 

55 

10 

8 

10


wide 


























• Important 




guide 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

5087 

• Pins: 8 mm, 8.5 mm, 9 mm 


5841, 5844 (9 mm only) 









80520 Public wide - steel - with inside roses rectangular 


34...114 

22 8 

6 

Ø19 

Ø6.5 

22 

1107 

1235 

1240 


p.49 

p.49 


p.49 

53 

277 

Entfernung 

95 

4x 

8 

55 

38 

38 

7.5 

17


wide 
























• Surface mounted 53 x 8 mm 


• Important 




guide 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

5087 

• Pins: 8 mm, 8.5 mm, 9 mm 


5841, 5844 (9 mm only) 








80530 Public wide - steel - with inside roses round 


22 

34...114 

6 

Ø19 

Ø6.5 

22 


8 

1107 

1235 

1240 


p.49 

p.49 


p.49 

53 

277 

Entfernung 

4x 

95 

8 

55 

38 

38 

7.5


wide 























• Important 

Lever handle always 

with female part 9 mm 

Cutout 

• Blind 

• RZ: 74 mm, 78 mm, 90 mm, 94 mm 

• PC: 70 mm, 72 mm, 78 mm, 85 mm, 

88 mm, 90 mm, 92 mm 

• PRZ: 74 mm, 78 mm, 90 mm, 94 mm 

Options 


(5066), 53004 (5064), 53009 (50661), 

53010 (5057), 53011 (5062), 53013 (5098), 

5087 



5841, 5844 (9 mm only) 








80540 Public wide - steel - without interior fittings 


22 

6 

Ø19 

1107 

1235 

1240 


p.49 

p.49 


p.49 

277 

95 

82 

118 

Entfernung 

55 

20 

20 

19

1.7 E reader internal zone Glutz eAccess E reader RFID/Code Remote 

82220 Surface mounting for indoor zone 


RFID/Code reader for indoor applications. 

The E readers are available in an elegant 

Feller EDIZIOdue (IP-40) and can be combined 

with all switches, sockets and frames 

from the Feller range. 


• Identification by RFID Mifare, code, 

or radio 868 MHZ 

• Remote board 

• Design Feller IP-40 

• High surface mounted 1 part 

• Size 74 x 74 mm 

• Mains operated (12-24 VDC) 

• 2 x Relays and 2 x Input RS 485 

Options 

• Keyboard field and 

frame white/black plastic 


74 54 

20 Technical specifications are subject to change without notice




RFID/code reader for indoor applications. 

The E readers are supplied in the elegant 









• Low surface mounted 1 part 

• Size 74 x 74 mm 



Options 





74 39 

21


82222 Recessed mounting for indoor use 










• Remote 


• Recessed mounting single part 

• Size 88 x 88 mm 

• Keyboard and frame plastic(br) white 61 or 

plastic black 60 



Options 

• Keyboard field white/black plastic 

Frame: 


plastic white 61 

stainless steel polished OA 

stainless steel polished OG 

aluminium black OP 

aluminium white OD 

glass white 1 B 


88 


57 

27 

7

1.7 E reader internal zone Glutz eAccess - E reader RFID/Code Battery 



RFID/code reader for indoor applications. 

The E readers are supplied in the elegant 







• Battery operated 



• Size 74 x 74 mm 

Options 





74 39 

23















• Size 74 x 74 mm 

Options 




74 54 



82212 Recessed mounting for indoor use 













• Size 88 x 88 mm 

Options 

• Keyboard field white/black plastic 

Frame: 


plastic white 61 

stainless steel polished OA 

stainless steel polished OG 

aluminium black OP 

aluminium white OD 

glass white 1 B 



88 

57 

36 

7 

25

1.8 E reader exterior zone Glutz eAccess - E reader RFID/Code Battery 

82410 Outdoor surface mounted 


RFID/Code reader for exterior applications. 

The E readers are available in Feller (IP-55) 

design. 






• Surface mounted 

• Size 87 x 87 mm 

Options 




87 64 


1.8 E reader exterior zone Glutz eAccess - E reader RFID/Code Battery 

82411 Recessed mounting for outdoor use 




design. 







• Size 87 x 87 mm 

Options 





87 

36 

21 

27

1.8 E reader exterior zone Glutz eAccess E reader RFID/Code Remote 

82420 Outdoor surface mounted 




design. 







• Size 87 x 87 mm 




Options 




87 64 


1.8 E reader exterior zone Glutz eAccess E reader RFID/Code Remote 

82421 Recessed mounting for outdoor use 




design. 







• Size 87 x 87 mm 

• Mains operation (12-24 VDC) 


Options 





87 

21 

27 

29

1.9 eAccess Media 

11111 

Programmig cards 

Function: device programming without software 

Security: sovereign control via system card 

Operating modes: Single or Multi. Permits a 

hierarchical structure (no time options possible) 

33333 

G Line Clip /G Line Card / C Line Card 

Mifare DESFire EV1 4kB, 13.56 MHz certified 

compliant with Commen Criteria BAL4+ third 

party applications are supported 

G Line Clip 

Dimension: 55 x 362 x 7 mm 

Colour: black and white 

Design: G Line 

Supplement: water-resistant to 3 m 

G Line Card/C Line Card 

Credit card format, 86 x 54 mm, Design G Line or 

C Line (customer-specific) 

Number of access points: 100,000 

Security: protected by Login and 

NET radio stick 

Operating system: Windows, Mac, Linux 


Ordering key E-hardware 

Article numbers: power supply and/or interfaces 

80XXX.00.XX.XX.XXX.XX.XX.XX.XX Battery holder/battery case with lithium batteryepower-set 

80XXX.01.XX.XX.XXX.XX.XX.XX.XX Battery holder/battery case with battery-set 

80XXX.11.XX.XX.XXX.XX.XX.XX.XX Remoteboard (external power supply/Relay/RS 485) 

80XXX.22.XX.XX.XXX.XX.XX.XX.XX Remoteboard (external power supply/Relay/RS 485) 

with relay cable (212180) for HZ-Lock 

Article numbers: cutouts 

80XXX.XX.00.XX.XXX.XX.XX.XX.XX inside, outside blank 

80XXX.XX.22.XX.XXX.XX.XX.XX.XX outside, inside RZ 

80XXX.XX.20.XX.XXX.XX.XX.XX.XX outside RZ, inside blank 

80XXX.XX.02.XX.XXX.XX.XX.XX.XX outside blank, inside RZ 

80XXX.XX.33.XX.XXX.XX.XX.XX.XX inside, outside PZ 

80XXX.XX.30.XX.XXX.XX.XX.XX.XX outside PZ, inside blank 

80XXX.XX.03.XX.XXX.XX.XX.XX.XX outside blank, inside PZ 

80XXX.XX.44.XX.XXX.XX.XX.XX.XX inside, outside PRZ 

80XXX.XX.40.XX.XXX.XX.XX.XX.XX outside PRZ, inside blank 

80XXX.XX.04.XX.XXX.XX.XX.XX.XX outside blank, inside PRZ 

Article numbers: distances 

80XXX.XX.XX.00.XXX.XX.XX.XX.XX 00 (blank) 

80XXX.XX.XX.70.XXX.XX.XX.XX.XX 70 









Article numbers: lever handle design, square spindle 

80XXX.XX.XX.XX.118.XX.XX.XX.XX 5057 / 8mm 







80XXX.XX.XX.XX.218.XX.XX.XX.XX 53001 (5071) / 8mm 








80XXX.XX.XX.XX.998.XX.XX.XX.XX Special execution 8mm 

80XXX.XX.XX.XX.115.XX.XX.XX.XX 5057 / 8,5mm 







80XXX.XX.XX.XX.215.XX.XX.XX.XX 53001 (5071) / 8,5mm 



31


Ordering key E-hardware (continuation 1) 

Article numbers: lever handle designs, square spindle 






80XXX.XX.XX.XX.995.XX.XX.XX.XX Special execution 8,5mm 



























Article numbers: surfaces 

80XXX.XX.XX.XX.XXX.00.XX.XX.XX satin stainless steel 

80XXX.XX.XX.XX.XXX.11.XX.XX.XX polished stainless steel 

80XXX.XX.XX.XX.XXX.22.XX.XX.XX polished brass 

80XXX.XX.XX.XX.XXX.33.XX.XX.XX satin brass 

80XXX.XX.XX.XX.XXX.99.XX.XX.XX special execution 

Article numbers: door thicknesses 

80XXX.XX.XX.XX.XXX.XX.01.XX.XX Org. hardware 28 up to 37mm 








32


Article numbers: door thicknesses 

80XXX.XX.XX.XX.XXX.XX.11.XX.XX Protection hardware 34 up to 43mm 








Article numbers: cylinder roses / cylinder covers - surface mounted/flush mounted 

80XXX.XX.XX.XX.XXX.XX.XX.01.XX external plate steel, height 3mm cylinder protection n 7mm / 4mm 


80XXX.XX.XX.XX.XXX.XX.XX.03.XX external plate steel, height 3mm cylinder protection n 10mm / 7 mm 

80XXX.XX.XX.XX.XXX.XX.XX.04.XX external plate steel, height 3mm cylinder protection 11mm / 8 mm 







80XXX.XX.XX.XX.XXX.XX.XX.31.XX ES-1 ZR for RZ cylinder protection rose 06-10mm 






80XXX.XX.XX.XX.XXX.XX.XX.41.XX ES-1 PZ / ES-3 RZ und PZ Zylinderabdeckung 09-16mm 

33

Ordering key E-reader, I/O-module and NET-repeater 

Ordering key E-reader, I/O-module and NET-repeater 

Article numbers: power supply and/or interfaces 

82XXX.00.XX.XX.XX.XX Lithium Battery-power-set 

82XXX.01.XX.XX.XX.XX Battery holder with lithium battery 

82XXX.11.XX.XX.XX.XX Remoteboard (external power supply/relay/RS 485) 

Article numbers: surfaces/colours AP-frames 

82XXX.XX.60.XX.XX.XX black 60 r 

82XXX.XX.61.XX.XX.XX white 61 

Article numbers: surfaces/colours UP/AP-frames 

82XXX.XX.XX.60.XX.XX plastic black 60 

82XXX.XX.XX.61.XX.XX plastic white 61 

82XXX.XX.XX.70.XX.XX satin stainless steel 0A 

82XXX.XX.XX.71.XX.XX polished staianless steel 0G 

82XXX.XX.XX.80.XX.XX aluminium black 0B 

82XXX.XX.XX.81.XX.XX aluminium white 0D 

82XXX.XX.XX.90.XX.XX glass white 1B 

Article numbers: surfaces/colours UP/AP-keyboard 

82XXX.XX.XX.XX.60.XX black 60 

82XXX.XX.XX.XX.61.XX white 61 

Article numbers: Software 

82XXX.XX.XX.XX.XX.01 Vers. 0.1 

34

Glutz AG 

Segetzstrasse 13, 4502 Solothurn, Schweiz 

Tel. +41 32 625 65 20, Fax +41 32 625 65 35 

info@glutz.com, www.glutz.com 

Glutz AG, Access Center 

Hertistrasse 31, 8304 Wallisellen, Schweiz 

Tel. +41 44 496 12 11, Fax +41 44 496 12 12 

info@glutz.com, www.glutz.com 

v5 20120912 lup 

Swiss Access Systems

Product book (PDF) - Glutz

Create successful ePaper yourself

Delete template?

Save as template?