I.G. ESI HOSPITAL, JHILMIL, DELHI-95 - Employees' State ...

7 PERIPHERAL NERVE LOCATOR
Battery operated;
Facility for identification of peripheral nerves in conduction anaesthesia and for
percutaneous stimulation for neuromuscular stimulation under GA;
LCD display of current, impulse pattern, pulse width and pulse amplitude;
TOF, Twitch, DBS & Tetanus modes of stimulation;
Autoclavable biopolar handle for visualizing intant muscle response without applying
electrodes;
To be supplied with rechargeable battery with charge
8 PHARMACEUTAL REFRIGERATOR
Temperature maintenance 2-8 degree C
- Capacity 360-500 L, double wall steel cabinet
- Alarm on lower and upper temperature deviation
- Audio alarm for low and high temperature
- Digital temperature display
- Preferably with castor wheels for smooth movement
- Quality certified CE or ISO or equivalent preferred
- Operation at 220V/ 50 Hz / single phase power
9 TECHNICAL SPECIFICATIOS FOR AUTOMATIC POINT OF CARE HAEMOSTASIS ANALYSER
ALONG WITH ACCESSORIES;
1) The Equipment should work on electromagnetic principle and measure secondary
oscillation of the wire induced by blood clot.
2) The Equipment should be a modular system which is upgradable from 1 to 4
analyzing channels with in the machine and should be able to run all the analyzing
channels simultaneously .Analyzing channels should be integrated with in the same
machine
3) Complete procedure from loading and unloading of sample filled cups, heating of
blood samples to mechanical synchronization with electronic components should be
fully automatic
4) It should come with prefixed torsion wire sensor
5) It should have an integrated notebook with in the main equipment
6)The equipment should have automatic electromagnetic brake system for protection
of sensor when not in use
7) The Machine should have software which provide automatic facility for
repositioning the cup carrier/holder and for engaging pin with torsion wire.
8) The following parameter should be analyzed by the machine and provide the
different reference values of all parameters with and without the reagents:
i) R-time
ii) K-time
iii) Alpha angle
iv) Maximum amplitude
v) LY 30/60
vi) A10 and A 20
9) Blood sample required for single test should be less than o.5ml
10) Demonstration of the machine would be required
11) Essential accessories:
a) consumables for at least 500 samples
b) Branded printer
c) Branded U P S.
12) It should have interface facility/ integration for data transfer from equipment to
third party hospital management application.
28
1 1000/-
1 10,000/-
1 20000/-