Download PDF - Kalzip

More documents

Recommendations

Info

20 Panel support requirements 4.2 Panel support requirements This section gives an overview of the panel support requirements. Section 6.3 gives further information on vertical panel joints. Panel overhangs To ensure sufficient room for the installation of flashings (either directly on the sub-construction or using the proprietary flashing support) the minimum distance between the centre of the panel locking area and the edge of the panel is 80 mm. The maximum allowable panel overhang is 20% of the panel span. min. 80 mm Minimum joint width All vertical panel joints must be a minimum of 10 mm width. This is to ensure there is sufficient space for the panels to expand and contract. For panels longer than 10 m, 1 mm per linear metre gap should be allowed. min. 10 mm
Stop A single mono-click bracket or modular click rail must never be used to support two FC panels. Maximum panel span The maximum panel span (distance between adjacent panel supports) is limited to 1.60 m independent of structural performance. Panel support requirements max. span 1.6 m max. overhang 20 % of span 21
Page 1: Kalzip FC rainscreen system Install
Page 4 and 5: 4 Introduction 1.0 Introduction Thi
Page 6 and 7: 6 System overview 2.0 System overvi
Page 8 and 9: 8 System overview Modular click rai
Page 10 and 11: 10 System overview Setting out tool
Page 12 and 13: 12 Transport, storage and handling
Page 14 and 15: 14 General information Panel protec
Page 16 and 17: 16 Sub-construction requirements 3.
Page 18 and 19: 18 Sub-construction requirements Ve
Page 22 and 23: 22 Panel support requirements Singl
Page 24 and 25: 24 Sub-construction installation 5.
Page 26 and 27: 26 Mono-click brackets on vertical
Page 28 and 29: 28 Modular click rail NE on vertica
Page 30 and 31: 30 Modular click rail SEL on L-brac
Page 32 and 33: 32 Modular click rail SE on U-brack
Page 34 and 35: 34 Modular click rail SE on horizon
Page 36 and 37: 36 Modular click rail SE on structu
Page 38 and 39: 38 Modular click rail setting out t
Page 44 and 45: 44 Panel installation (bottom to to
Page 46 and 47: 46 Panel installation (bottom to to
Page 48 and 49: 48 Panel installation (top to botto
Page 50 and 51: 50 Vertical panel joints 6.3 Vertic
Page 52 and 53: 52 Fixed point 6.4 Fixed point Ever
Page 54 and 55: 54 Adjustment of panel position 6.5
Page 56 and 57: 56 Adjustment of panel position 5.
Page 58 and 59: 58 Corner panels Corner panel fixed
Page 60 and 61: 60 Corner panels Corner panels (pla
Page 62 and 63: 62 Flashing installation 3 4 5
Page 64 and 65: 64 Individual panel replacement 1.
Page 72:
72 www.kalzip.com While care has be
show all

Download PDF - Kalzip

Create successful ePaper yourself

Delete template?

Save as template?