Description - Mks.com

MKS Source Integrity Enterprise (also referred to as simply Source Integrity) provides a complete
command line interface (CLI) to manage Source Integrity projects and archives. The CLI and
graphical user interfaces (GUI) provide the exact same functionality. In fact, in most cases, these
two interfaces are interchangeable -- you can easily alternate between these interfaces and they
are quickly synchronized to facilitate your user experience.
Source Integrity commands follow the si prefix. For example, si about displays the product
information for Source Integrity, while si co -l samplefile.c checks out a locked copy of a
sandbox member file.
Each command allows a limited set of options. Single letter options must always be preceded by a
single dash ( - ), while longer option strings must be preceded by a double dash ( -- ). The long
strings are not case sensitive, but are shown in mixed case to facilitate readability.
To see a list of the available Source Integrity commands and brief descriptions of each, type si.
To see a list of options available to a particular command, simply append -? or --usage to the
command, for example,
si add --usage
In options, square brackets indicate optional strings, for example, the no is an optional prefix in --
[no]batch. The two ways to use this option would be --nobatch or --batch.
For information on Authorization Administrator commands and permissions, see the MKS Integrity
Server Administration CLI Reference Guide.
Introduction
● intro
● man
Source Integrity Commands
● si about
● si acceptcp
1 of 457