Table of Contents

CORAMIC 29 ®
Coramic 29 ® is an organically treated facing
material mechanically clinched to both sides of a
perforated steel core. It has good resistance to oil
and gasoline. Applications include exhaust
manifold, carburetor and turbocharger gaskets.
FLAT PACKED
(One Sheet Per Package)
JV222 1/16” x 10-1/4” x 36”
JV224 1/16” x 24” x 36”
*
CORAMIC 129 ®
Coramic 129 ® is the same as Coramic 29 ® except
the facing material is only on one side of the
perforated steel core.
FLAT PACKED
(One Sheet Per Package)
JV225 1/16” x 12” x 28-1/2”
*
VICTOCOR ®
Victocor ® is a hard gasket material composed of a
fibrous based sheet with a nitrile binder
mechanically clinched to both sides of a perforated
steel core. It is resistant to oil, gasoline, water and
antifreeze solutions. It’s most common usage is as
a head gasket and intake manifold gasket material.
FLAT PACKED
(One Sheet Per Packaged)
JV222VC 1/16” x 10-1/4” x 36”
*
NITROSEAL ®
Nitroseal ® is a pure non-oxidizing graphite facing
material on a pierced steel core designed
specifically for use on exhaust applications. It has
a temperature rating of 1300°F in the clamped
state.
312
FLAT PACKED
(One Sheet Per Package)
JV222SG 1/32” x 10-1/4” x 36”
JV313SG 3/64” x 10-1/4” x 36”
JV314SG 1/16” x 10-1/4” x 36”
JV315SG 3/64” x 20” x 40”
JV316SG 1/16” x 20” x 40”
Bulk Material
BRASS SHIM STOCK
Roll Packaged – 6” x 200”
9014N .005”
9015N .010”
*
CORK-RUBBER SHEETS
ROLL PACKED – 12” X 24” SHEETS
JV121 (One Sheet) 1/16”
JV122 (One Sheet) 3/32”
JV123 (One Sheet) 1/8”
FLAT PACKED – 12” x 36” SHEETS
(PRICED PER SHEET)
32504 (Ten Sheets) 1/16”
32505 (Ten Sheets) 3/32”
32506 (Ten Sheets) 1/8”
32507 (Five Sheets) 1/4”
FLAT PACKED – 18” X 36” SHEETS
(PRICED PER SHEET)
32607 (Ten Sheets) 1/16”
32608 (Ten Sheets) 3/32”
32609 (Ten Sheets) 1/8”
*
TUFF-CORK ®
Cork Composition on a solid steel core.
(One Sheet Per Package)
JV300TC 3/32” x 12” x 24”
JV301TC 3/32” x 18” x 36”
*
CARBONLESS IMPRESSION PAPER
There is an easy and accurate method to
check the flatness of mating surfaces sealed
by gaskets - carbonless impression paper.
This method is particularly useful for checking
the flatness of the cylinder head and block
where the sealing is critical.
JV311 (Two Sheets) 10” x 30” Sheet
JV312 (Twelve Sheets) 10” x 30” Sheet